What to Do When the Engine Warning Light Is On and the Car Shakes?

3 Answers
LaAlan
07/24/25 10:46pm
If the engine warning light is on and the car shakes, you should call the 4S shop or a professional auto repair shop for help, request a tow truck, or wait for rescue. Do not risk continuing to drive. Reasons for the engine warning light being on and the car shaking: 1. The ignition system has malfunctioned, and the working conditions of the spark plugs, high-voltage wires, and ignition coils are faulty, leading to poor ignition system performance; 2. The mixture in the cylinder is too rich, causing symptoms such as knocking and shaking in the vehicle. An engine (Engine) is a machine capable of converting other forms of energy into mechanical energy. It was invented in the UK and can refer to either the power generation device or the entire machine, including the power unit.
Was this review help?
19
4
Share
SanJames
08/10/25 10:15am
Last time I was driving my old Accord on the highway, I encountered the same situation. The engine light suddenly came on, and the car was shaking like a massage chair. I immediately slowed down and pulled over, turned on the hazard lights, and checked the oil dipstick and coolant—fortunately, the levels were normal. My first thought was a misfire, most likely an issue with the ignition system, since spark plugs typically last only about 70,000 to 80,000 kilometers. I remember the mechanic taught me that in such cases, it's best not to push through—just find a nearby repair shop to read the trouble codes. Otherwise, if the ignition coil burns out, it'd be even more troublesome. In the end, replacing a set of spark plugs fixed the issue. Spending a few hundred bucks is much better than a major repair. Safety on the road is the top priority—never take risks with a shaking car.
Was this review help?
8
3
Share
Expand All
KeeganRose
09/26/25 6:30am
I know a thing or two about cars. When the engine light comes on along with shaking, it's definitely not a minor issue. Common causes include a faulty ignition coil leading to a misfire, clogged fuel injectors due to carbon buildup, or unstable fuel pressure. First, check the condition of the engine oil and oil filter—if there's a lot of sludge, change them immediately. If you can't figure it out yourself, remember to take it to a shop and use a diagnostic tool to read the trouble codes—it can save a lot of guesswork. Especially don't overlook those small sensors; a dirty oxygen sensor can also cause shaking. My neighbor's Civic was fixed that way before.
Was this review help?
1
5
Share
Expand All
More Forum Discussions

Where to Add Coolant?

Coolant is added into the radiator and the auxiliary tank. The steps for adding coolant are: 1. Turn the car key forward to shut off the engine; 2. Let the engine sit until the water temperature drops to normal temperature; 3. Open the front engine hood; 4. Unscrew the cap of the small radiator tank to release pressure from the cooling system; 5. Add coolant to the small tank up to the MAX mark. Functions of coolant: 1. Provides anti-corrosion protection for cooling system components; 2. Prevents scale buildup to avoid reducing the radiator's heat dissipation efficiency; 3. Ensures the engine operates within the normal temperature range. Precautions for using coolant: 1. Avoid mixing different types of coolant; 2. Do not use low-quality coolant; 3. Do not directly add concentrated coolant to prevent deterioration or excessive viscosity at low temperatures.
4
0
Share

Why does the Mercedes-Benz daytime headlight turn on automatically?

Mercedes-Benz headlights are set to automatic by default. When the automatic headlights turn on, it indicates that the ambient light is dim and requires illumination. Automatic headlights function by sensing changes in external light intensity to control the automatic activation or deactivation of the headlights. Below are relevant details: 1. Sensor: Automatic headlights rely solely on a sunlight sensor to determine the surrounding brightness and cannot analyze real-time changes in the environment to select between high and low beams. If you want the automatic headlights to control the high beams, you need to push the combination light switch forward to the high beam position. 2. Automatic Headlights: Also known as auto headlights, these are systems installed by some manufacturers for driver convenience, featuring a photosensitive control system in the headlights. When this system detects that the external light intensity is above or below a certain threshold, the car's headlights will automatically turn on or off.
16
2
Share

Where is the fuel pump located on the BAIC Weiwang M20?

The fuel tank of the BAIC Weiwang M20 is located at the rear of the vehicle. The fuel pump is positioned at the bottom of the fuel tank. Below is some relevant information about the BAIC Weiwang M20: 1. Introduction: The BAIC Weiwang M20 is the latest model from BAIC Group, offering certain advantages in five key areas: styling, safety performance, space, power, and user-friendly configurations. The vehicle is designed for the family car market, featuring all-new designs in appearance, safety, space, and power. The Weiwang M20 comes in six trim levels: Practical, Capable, Fashion, Premium, Joy, and Luxury. 2. Exterior: The BAIC Weiwang M20 incorporates more trendy elements. Its front adopts a crossover-style design language, with a car-like front grille that highlights the product's robust, spacious, and elegant style. The rear design is simple and generous, with the M20 equipped with a rear spoiler and rear wiper.
19
5
Share

What is the solution for a lost BMW car key?

BMW car key loss solutions are: 1. Use a spare key; 2. Contact a professional locksmith company; 3. Visit a 4S store to configure a new key; 4. Replace the entire vehicle lock. BMW models include: BMW X1, BMW X2, BMW X3, BMW X4, BMW X6, etc. Taking the 2021 BMW X1 as an example, it is a compact SUV with body dimensions of: length 4565mm, width 1821mm, height 1620mm, and a wheelbase of 2780mm. The 2021 BMW X1 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 140PS, maximum torque of 220Nm, and maximum power of 103kW, paired with a 7-speed dual-clutch transmission.
3
0
Share

What is the correct method for adding Freon to a car?

The correct method for adding Freon to a car is: 1. Connect the high and low-pressure side joints of the combination pressure gauge to the compressor's high and low-pressure service valves respectively, then connect the central joint to the refrigerant canister; 2. Open the refrigerant canister valve, loosen the middle hose joint nut, and purge the air; 3. Open the high-pressure valve, invert the refrigerant canister, and charge the refrigerant until it reaches the specified level; 4. Close the high-pressure valve and remove the pressure gauge and refrigerant canister. Situations requiring Freon addition include: 1. When the air conditioning vent cannot reach below 16 degrees Celsius, refrigerant needs to be added; 2. When the vent temperature can reach below 16 degrees Celsius but takes too long, such as more than 5 to 6 minutes, refrigerant also needs to be added.
19
0
Share

What is the method to replace the battery in a Besturn B70 key?

Besturn B70 key battery replacement method is as follows: 1. Press the white button on the top; 2. Remove the mechanical metal key; 3. Pry open the key along the gap; 4. Replace the old battery with a new one. Taking the 2021 Besturn B70 as an example, it belongs to the mid-size car category with body dimensions of: length 4810mm, width 1840mm, height 1455mm, and a wheelbase of 2800mm. The 2021 Besturn B70 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L turbocharged engine producing a maximum horsepower of 169PS, maximum power of 124kW, and maximum torque of 258Nm, paired with a 6-speed manual transmission.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.