···
Log in / Register

What to Do When the Engine Warning Light Comes On in a Chenglong H5?

4 Answers
SanAndrew
07/29/25 11:36pm
If the engine warning light comes on, you can follow these steps to address the issue: First, check whether the engine is running normally. Look for signs such as shaking, black smoke emission, or difficulty starting. If any of these issues are present, avoid restarting the engine. Important note: Do not restart the engine if the red warning light is on. If the engine is running normally and the vehicle can be driven, proceed to a service station as soon as possible to diagnose the problem. The service station can easily read the fault codes using a portable diagnostic tool, allowing for targeted repairs based on the fault information. If the engine is running normally, the owner can also try gently reconnecting various wiring harness connectors, as a loose connection may be the cause. Alternatively, repeatedly turning the key to the ON position may reset the warning light. Generally, the engine warning light may come on due to the following seven reasons: 1. Sensor malfunction: Sensors such as the coolant temperature sensor, crankshaft position sensor, air flow sensor, intake air temperature sensor, and oxygen sensor may become damaged, have poor contact, or experience signal interruption. When the ECU cannot accurately obtain engine data, the engine warning light will illuminate. 2. Fuel or oil quality issues: If the recommended fuel or engine oil is not used as specified by the manufacturer, it may cause engine wear and trigger the warning light. 3. Poor combustion of the air-fuel mixture: Poor combustion can lead to engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate. Issues such as faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can cause poor combustion. 4. Turbocharger problems: Issues with the intake boost piping or turbocharger can also trigger the engine warning light. The most common problem is turbocharger damage, often accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. 5. Air intake issues: If the air intake system is compromised, it may lead to clogged engine pipes, and in severe cases, the engine warning light will come on. A dirty air filter that is not cleaned regularly can cause intake problems. 6. Exhaust system issues: Exhaust problems can also trigger the engine warning light. Common causes include faults in the rear oxygen sensor, catalytic converter, exhaust camshaft, or bearings. The catalytic converter is the most frequent culprit, often damaged by the use of leaded gasoline, lead- or silicon-containing lubricant additives, physical impact, or fuel system malfunctions. 7. Anti-theft system malfunction: If the vehicle's electronic anti-theft system fails or the anti-theft controller does not match the engine ECU, the engine may not operate correctly, and the warning light will illuminate.
Was this review help?
3
5
Share
VonAnnie
08/16/25 2:37am
After driving for so many years, what I fear the most is the sudden illumination of the engine fault light, just like what happened to my car the other day. I've also encountered this with the Chenglong H5 before—usually, the light indicates minor issues like sensor false alarms or aging spark plugs. But don’t take it lightly; safety comes first. Immediately observe the car’s condition to check for any shaking, unusual noises, or loss of power. If any of these occur, pull over right away and turn on the hazard lights. Never force the car to keep running, especially on the highway. Next, check if the onboard screen displays any specific fault information or take a quick look under the hood, but avoid tampering with parts. The best approach is to head to a 4S shop or a reliable repair shop as soon as possible, where a technician can connect a diagnostic tool to read the fault codes and identify the root cause. Don’t skip regular maintenance—the H5’s engine system is quite sensitive, and routine checks can prevent many issues.
Was this review help?
13
1
Share
Expand All
IsabellaLee
10/19/25 3:02am
As an ordinary person who frequently deals with cars, I have to say that an illuminated engine warning light should not be ignored. H5 owners might find that the light comes on due to abnormalities in the fuel system or exhaust system. When my car's light came on, I first checked if the fuel gauge was normal and if there was any unusual smell from the exhaust. If there's no major issue, try turning the engine off and restarting it once—sometimes it's a false alarm. But if the light remains on, especially if it flashes continuously after starting, seek professional help immediately. The diagnostic process is straightforward: use a mobile app or shop equipment to connect to the OBD port and read the trouble codes to determine whether it's an oxygen sensor or intake valve issue. Don't attempt DIY repairs; the electrical system is complex and prone to errors. Note the car's condition before and after the light comes on to help the mechanic speed up the repair process.
Was this review help?
9
5
Share
Expand All
LeNadia
12/02/25 3:37am
Hey, the engine warning light just came on in my newly purchased ChengLong H5, which is a bit frustrating! But don't panic, I had the same issue last time. The light indicates the computer detected an abnormality, most commonly an emission problem. First, park and observe the engine's behavior—is it running normally? If everything seems fine, drive carefully to a service center. Remember to bring your maintenance records for easy reference. A professional technician can quickly identify the issue by checking the error code—it might just need a part replacement. Don't delay, as it could affect the vehicle's lifespan and fuel efficiency.
Was this review help?
5
2
Share
Expand All
More Forum Discussions

What is the reason why the BMW X5 seat belt cannot be pulled out?

BMW X5 seat belt cannot be pulled out because it is stuck or has a mechanical failure. If it is stuck, you can try to stretch and retract it appropriately to restore it. If it is a mechanical failure, please seek professional repair. The function of the seat belt is to tighten the slack belt instantly when the vehicle collides or uses emergency braking, firmly securing the occupant in the seat to prevent secondary collisions. The BMW X5 is the first four-wheel-drive SUV model of the BMW brand, with a length, width, and height of 4909mm, 1938mm, and 1772mm respectively, and a wheelbase of 2933mm. The vehicle is equipped with a front windshield green sunshade, roof travel rack, panoramic electric sunroof, xenon headlights, adaptive headlights, front and rear parking distance warning system, etc.
15
4
Share

What is the motor power of the XPeng G3?

The motor power of the XPeng G3 is 145 kW, with a maximum torque of 300 Nm. The vehicle is equipped with a permanent magnet synchronous motor. The XPeng G3 features a column-mounted gear shift lever integrated into the steering column, which is convenient to use and highly space-saving. The transmission utilizes a fixed gear ratio, typical of single-speed transmissions in electric vehicles. The XPeng G3 is equipped with 25 intelligent sensing devices: 2 front-facing cameras, 2 side-facing cameras, 4 surround-view cameras, 3 millimeter-wave radars, 12 ultrasonic sensors, and 2 in-cabin smart cameras, all discreetly embedded within the flowing body lines of the vehicle.
7
1
Share

Where is the oil filter of Dongfeng Fengshen AX7 located?

The oil filter of Dongfeng Fengshen AX7 is located on the side of the cylinder block. You can lift the vehicle to check its position. The oil filter removes impurities, gum, and moisture from the oil, then delivers clean oil to all parts of the engine that require lubrication. It should be replaced every time the engine oil is changed. The Dongfeng Fengshen AX7 is a domestic brand SUV model with dimensions of 4645mm in length, 1880mm in width, and 1690mm in height, and a wheelbase of 2715mm. The vehicle features electric lumbar support for the driver's seat, welcome memory function for the driver's seat, stepless adjustment for the rear seat angle, an added LOGO welcome light function, and is equipped with features such as automatic adjustment memory for the exterior rearview mirrors when reversing and a sensor-activated electric tailgate.
9
0
Share

What is the reason for the steering gear oil leakage in the Verna?

The reason for the steering gear oil leakage in the Verna is due to poor sealing or aging of the car's steering gear, which requires timely inspection and maintenance. In severe cases, replacement is necessary. The steering gear is part of the steering transmission mechanism, also known as the steering box or steering mechanism. It is an important component in the car's steering system, whose function is to amplify the force transmitted from the steering wheel to the steering transmission mechanism and to change the direction of force transmission. The Verna is a model jointly designed and developed by Beijing Hyundai, Hyundai North America, and the European Design Center. Its dimensions are 4300mm in length, 1705mm in width, and 1460mm in height, with a wheelbase of 2570mm. The car is equipped with a rear parking radar, which can effectively reduce the risk of rear-end collisions.
17
2
Share

What are the functions of the BMW X1 central control screen?

BMW X1 central control screen functions include car door settings, audio system settings, various vehicle system settings, as well as displaying rearview camera images and Bluetooth-connected device information. The car's central control system is used to manage devices such as air conditioning and audio. Through this system, the driver can control the car doors and window switches. The BMW X1 is an imported model under the BMW brand, with dimensions of 4454mm in length, 1798mm in width, and 1545mm in height, and a wheelbase of 2760mm. The vehicle is equipped with a 10.25-inch central LCD touch display, full-color head-up display system, smartphone integration system, BMW ConnectedDrive, and natural voice recognition system.
6
1
Share

How to remove the air filter of Wuling Hongguang S?

The method to remove the air filter of Wuling Hongguang S is: 1. The air filter is located behind the glove box. Open the glove box to see the blower inside; 2. There is a small straight plate inside the blower with a short section of white paper on it. On the right side of the black small straight plate, there is a buckle. Remove it to take out the air filter. The length, width, and height of Wuling Hongguang S are 4655mm, 1735mm, and 1780mm respectively, with a wheelbase of 2800mm. In terms of configuration, the car is equipped with safety features such as ESC body stability system, hill start assist, rear parking radar, rearview camera, heated exterior mirrors, and rear window defogger to ensure safety during driving.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.