···
Log in / Register

What to Do When the Engine is Locked and Won't Start?

3 Answers
MacSkylar
08/29/25 6:28am
There are two methods to resolve an engine lock: 1. Battery Disconnection Method: When the engine is mistakenly locked, you can use the battery disconnection method to force a reset. The specific steps are: First, open the front engine compartment and remove the negative terminal of the battery for about five minutes. This will clear the stored engine protection data. Then, reconnect the negative terminal and attempt to start the engine. This method requires some hands-on ability from the car owner. 2. Seek Help from a 4S Shop: If you are not confident in your own ability, besides the above forced method, you can also seek help from a 4S shop. The staff at the 4S shop will use professional diagnostic equipment to reset the anti-theft system.
Was this review help?
20
3
Share
DelHeidi
09/11/25 4:05am
Last time my car wouldn't start either, and it was really frustrating. It could be that the battery was dead because I left the lights on for too long when parked; or maybe the starter motor was stuck. First, check if the dashboard lights come on—if they're dim, you'll need to charge the battery—you can try jump-starting it with a friend's car. If the sound is normal but it still won't start, it might be a faulty ignition coil. Try manually turning the engine to see if it moves; if it's stuck, don't force it to avoid damaging the engine. Finally, take it to a professional repair shop—they can quickly diagnose and fix the issue. Regular maintenance of the battery and motor can help avoid these troubles, and try not to leave the car idle for too long.
Was this review help?
9
4
Share
Expand All
DiFrank
10/25/25 4:56am
When the engine is locked and won't start, don't panic. First check if the battery is weak - the brightness of the lights can indicate this; if low, ask someone to jump-start it with jumper cables. Listen for cranking sounds - no response may indicate a starter motor failure or blown fuse. If the engine itself is locked, manually rotate the crankshaft to test for seizure, and avoid forcing startup to prevent greater damage. For safety, promptly call a tow truck to take it to a nearby repair shop for inspection. Regular oil changes and battery checks in daily maintenance can prevent these sudden issues, saving both money and hassle.
Was this review help?
15
2
Share
Expand All
More Forum Discussions

What are the differences between the V90 and V90 Cross Country

Here are the specific differences between the V90 and V90 Cross Country: 1. Exterior: The V90 Cross Country has higher recognition value with a taller body shape, which might make it appear bulky, but the V90 Cross Country doesn't show this effect. Compared to the Volvo V90, the V90 Cross Country doesn't sit as low, being slightly taller by 2cm with a higher visual center of gravity. However, with excellent design, its appearance remains very attractive. 2. Features: The V90 Cross Country comes with leather wrapping on both the dashboard and doors, giving the interior an excellent sense of luxury. Particularly, Volvo's audio system, with a B&W setup in a station wagon, makes people feel like getting in the car is like stepping into poetry and distant travels. Additionally, the differences between the Volvo V90 and V90 Cross Country also include the new air suspension system and active LED headlights.
19
3
Share

Where is Jianghuai vehicles produced?

Jianghuai vehicles are produced in Anhui Province. Here is some relevant information: 1. Product lineup: heavy, medium, light, and mini trucks; multi-purpose commercial vehicles; MPVs; SUVs; sedans; buses; specialized chassis; and core components such as transmissions, engines, and axles. SEHOL new energy vehicles; Refine series; SEHOL fuel vehicles; Starlight series; pickup truck series; D-VAN series; Shuailing series; Junling series; Kangling series; Kaida series. 2. Development history: The predecessor of JAC was Hefei Jianghuai Automobile Works, established in 1964. It is a comprehensive automotive enterprise group that integrates R&D, production, and sales of a full range of commercial vehicles, passenger vehicles, and powertrains, focusing on "advanced energy-saving vehicles, new energy vehicles, and intelligent connected vehicles," while also covering areas such as mobility services and financial services.
16
3
Share

Is a water temperature of 95 degrees Celsius normal for a HOWO truck?

A water temperature of 95 degrees Celsius is not normal for a HOWO truck. Below are the specific reasons for high water temperature in HOWO trucks: 1. Insufficient coolant: Coolant leakage or low coolant levels can cause the engine water temperature to rise. In this case, check the coolant level and top it up to the appropriate level if necessary. Recheck the level after a few days to see if it has dropped significantly. If so, locate the source of the leak. 2. Faulty radiator fan: When the vehicle is running at high speeds, the heat generated cannot be effectively transferred to the coolant, affecting heat dissipation and leading to increased coolant temperature, which can cause boiling and other issues. 3. Faulty water pump: Water pump failures can include seized bearings or damaged impellers. Seized bearings are relatively rare, while damaged impellers are more common, such as cracked impellers or impellers becoming loose from the pump shaft, resulting in slower coolant circulation and potentially causing engine overheating issues.
9
3
Share

Why does the Sportage multifunction steering wheel malfunction?

The malfunction of the Sportage multifunction steering wheel could be due to mechanical failure, functional failure, or electrical circuit failure. Mechanical failure: Many components in the steering wheel are wear-prone parts. During use, wear and tear can lead to a shortened lifespan. It cannot be ruled out that functional failure and uncontrollable quality issues are caused by substandard quality, unreasonable design, or immature manufacturing processes. Electrical circuit failure or connector failure: The corresponding malfunctioning transmission components of the steering wheel have matching circuits and connectors, plugs, etc., for electronic and electrical connections with the central control unit. Unsuitable usage environments can accelerate connector oxidation, wire aging, button contact oxidation, short circuits in connectors, or intermittent disconnections, all of which can lead to malfunction. Solution: Check whether the steering wheel control module is faulty. The multifunction steering wheel buttons are connected via the airbag slip ring circuit. The vehicle's electrical control unit stores corresponding fault codes internally, so it is advisable to promptly visit a 4S shop for appropriate repairs.
7
4
Share

Will a B2 License Be Downgraded to C1 After 12 Demerit Points?

B2 license will be downgraded to C1 after accumulating 12 demerit points. Here is some extended information about driver's licenses: 1. Introduction: A driver's license (full name: motor vehicle driving license), also known as a "driving permit," is a document issued by government transportation authorities to individuals who meet the qualifications for driving, usually in the form of a card. To obtain a driver's license, one must meet the minimum age requirement and pass a driving test. The license typically specifies the types of motor vehicles the holder is permitted to drive, such as motorcycles, passenger cars, trucks, buses, etc. 2. Driving Test Content: The examination includes three subjects: traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving). The order of the test subjects is as follows: traffic regulations and related knowledge (referred to as Subject 1 [theory]), field driving (referred to as Subject 2 [nine items]), and road driving (referred to as Subject 3 [road test and safe and civilized driving]). During the examination process, if a candidate fails a subject, the subsequent subjects will not proceed. Each subject has two attempts, and if both attempts are unsuccessful, the examination is terminated. During the validity period of the learning license, candidates can pay a re-examination fee and retake the test after further study. The re-examination fee varies depending on local conditions.
2
2
Share

What is the minimum ground clearance of the domestic Model Y?

The minimum ground clearance of the domestic Model Y is approximately 150 millimeters (mm). Relevant information about the minimum ground clearance is as follows: Minimum Ground Clearance: The distance between the lowest protruding part of the car's chassis and the horizontal ground when the car is fully loaded (with the maximum allowable load mass). Significance: The minimum ground clearance reflects the car's ability to pass over obstacles or uneven ground without collision. Relevant information about the domestic Model Y is as follows: Body Dimensions: The wheelbase of this car is 2890 millimeters (mm), and its length, width, and height are 4750 millimeters (mm), 1921 millimeters (mm), and 1624 millimeters (mm), respectively. Power Specifications: The Model Y comes in Long Range and Performance versions. The Long Range version has a front motor with a maximum power of 137 kW and a maximum torque of 219 Nm, and a rear motor with a maximum power of 180 kW and a maximum torque of 326 Nm. The Performance version has a front motor with a maximum power of 137 kW and a maximum torque of 219 Nm, and a rear motor with a maximum power of 202 kW and a maximum torque of 404 Nm.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.