What to Do When the Engine Exhaust System Warning Light Comes On?

Is the traffic rule to yield to vehicles going downhill when going uphill?

Traffic rules require yielding to vehicles going downhill when going uphill. Here is a relevant introduction to the uphill-yield-to-downhill traffic rule: 1. On narrow slopes, the vehicle going uphill has the right of way. However, if the downhill vehicle has already entered the slope while the uphill vehicle hasn't started ascending, the uphill vehicle should yield to the downhill one. This considers that vehicles going uphill are prone to stalling, which may cause traffic accidents; 2. When both uphill and downhill vehicles are at opposite ends of the slope simultaneously, the downhill vehicle proceeds first. Higher speeds during downhill travel can easily create driving hazards. Having the uphill vehicle go first would reduce potential accident severity compared to downhill vehicles.

13

1

Share

Why can't I register my driver's license on Traffic Management 12123?

Traffic Management 12123 cannot register the driver's license because the application number plate and the driver's license are not in the same location. Situations regarding driver's license registration: After completing the fourth subject of the driver's license test, when checking the driver's license information on Traffic Management 12123, the status of the driver's license shows as 'registered', meaning the relevant information of the driver's license has already been registered in the traffic management system. This proves that the driver of this license has obtained the qualification for the permitted driving model, but the driver's license is still in the mail or needs to be collected at the vehicle management office. Handling methods when showing 'registered': Generally, if the driver's license status shows as 'registered', it means the driver has not yet collected the license from the vehicle management office, or the license has not been delivered by mail. According to relevant regulations, driving a vehicle on the road requires carrying the vehicle registration certificate and driver's license, and the car's windshield must display stickers such as the annual inspection label, compulsory traffic insurance label, and environmental protection label. Otherwise, there will be relevant penalties.

12

1

Share

How many times can you take the driving test (Subject 3)? Is there a limit?

Subject 3 can only be taken 5 times, with each scheduled test offering two on-site attempts. If the first attempt is unsuccessful, you can immediately try again. This means a total of 10 test opportunities across 5 scheduled tests. If all 5 scheduled tests are used and you still fail, the results of other passed subjects will be invalidated, requiring you to re-enroll in the driving course. Below are the relevant rules for the Subject 3 test: 1. According to Article 37 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" (Ministry of Public Security Order No. 123), within the validity period of the driving skill test permit, the number of scheduled tests for Subject 2 and Subject 3 road driving skills must not exceed five; 2. If the fifth scheduled test is still unsuccessful, the results of other passed subjects will be invalidated; 3. Additionally, starting from enrollment, the validity period for driver's license training is 3 years. During this period, there is no limit to retakes for Subject 1 and the Subject 3 safety and civilized driving test. However, if you fail the fifth scheduled test for Subject 2 or Subject 3 road driving skills, you must restart the learning process from Subject 1.

1

4

Share

Where is the Subaru BRZ's cabin air filter located?

Subaru BRZ's cabin air filter is located inside the glove compartment in front of the passenger seat. The steps to replace the cabin air filter are as follows: 1. Open the glove compartment in front of the passenger seat and remove all items inside. 2. Press the plastic clips on both sides inside the glove compartment, then remove the plastic cover of the glove compartment. 3. After removing the plastic cover, you will see the cabin air filter. 4. Replace it with a new cabin air filter, then reassemble the glove compartment plastic cover in reverse order of disassembly. This completes the process of replacing the Subaru BRZ's cabin air filter.

20

2

Share

How many liters of engine oil should be added to a BMW X4?

BMW X3 requires approximately 4.8 liters of engine oil. Below are specific details about the BMW X3: 1. Model: The BMW X3 is an SUV model with distinctive characteristics, introducing the new SUV Sports Activity Vehicle concept and equipped with BMW's patented xDrive intelligent all-wheel-drive system. 2. Design Philosophy: The BMW X3 combines the unique proportions of a Sports Activity Vehicle with classic and innovative design elements, featuring a fresh and youthful exterior while emphasizing the robust and powerful design traits of the BMW brand. 3. Interior Space: The BMW X3's interior can accommodate five people, along with ample luggage or sports equipment, providing greater convenience for your travels. The BMW X3 is the latest model in its series.

13

3

Share

What Causes Both the Anti-Slip and ABS Lights to Illuminate?

The reasons for both the anti-slip and ABS lights illuminating include wheel speed sensor failure, wheel speed sensor circuit failure, and ABS pump failure. Wheel Speed Sensor Failure: Use an automotive diagnostic computer to read the data stream of the wheel speed sensor and analyze whether the sensor's data matches the actual data to confirm this fault. If the wheel speed sensor fails, it cannot transmit correct data to the ABS pump, causing both the ABS and anti-slip lights to illuminate. The solution is to replace the wheel speed sensor, which is free of charge at authorized 4S shops during the warranty period. Wheel Speed Sensor Circuit Failure: A technician can lift the vehicle with a lift and inspect the wheel speed sensor's connecting circuit for damage, deformation, or loose plugs to confirm this fault. If the wheel speed sensor circuit fails, the sensor cannot function, leading to the illumination of both the ABS and anti-slip lights. The solution is to repair the circuit. If not caused by human factors, the repair is free of charge at authorized 4S shops during the warranty period. ABS Pump Failure: Use an automotive diagnostic computer to read the ABS pump's data stream and analyze whether its working state is normal. Then, use a multimeter to measure the ABS pump's resistance value and check if it falls within the normal range. If the resistance value is outside the normal range, this fault can be confirmed. ABS pump failure renders the ABS system unusable, causing both the ABS and anti-slip lights to illuminate. The solution is to replace the ABS pump, which is free of charge at authorized 4S shops during the warranty period.

9

5

Share

What to Do When the Engine Exhaust System Warning Light Comes On?

Is the traffic rule to yield to vehicles going downhill when going uphill?

Why can't I register my driver's license on Traffic Management 12123?

How many times can you take the driving test (Subject 3)? Is there a limit?

Where is the Subaru BRZ's cabin air filter located?

How many liters of engine oil should be added to a BMW X4?

What Causes Both the Anti-Slip and ABS Lights to Illuminate?

Do I need to cancel my expired driving school registration before reapplying after three years?

Is the 4A15J1 Engine Japanese Technology?

Is a 45 tire too thin?

What are the annual inspection regulations for sedans?