···
Log in / Register

What to Do When the Door is Closed but the System Shows It's Open?

4 Answers
AnnaAnn
09/05/2025, 04:29 AM

Solutions for when the door is closed but the system shows it's open: You need to open the car door, manually press the door control switch, and then observe whether the door warning light turns off. Another possible reason for this issue is that the trunk is not securely closed. Even if all other doors are tightly shut, the system may still indicate that a door is open. In this case, check if the trunk is properly closed. Additionally, the sensor switch for the door closure might be damaged. You may need to replace the sensor or try opening the door and closing it again with more force. A sensor is a detection device that can sense the measured information and convert it into an electrical signal or other required form of information output according to certain rules.

Was this review help?
7
2
Share
DiLeila
09/17/2025, 04:37 AM

I've encountered the issue of the door being closed but still showing as open several times. Common causes include the door not being fully latched, dust accumulation on the door frame sensor preventing detection, or possible circuit shorts such as a blown fuse. Don't panic yet—after closing the door, try pushing it firmly to ensure it's properly shut, as sometimes debris or insufficient force can be the culprit. Next, inspect the door switch contacts and wipe them clean with a cloth. If the warning light persists, refer to your owner's manual to locate the fuse box and replace the relevant fuse. To prevent this issue, always make sure doors are fully closed when parking. If manual troubleshooting doesn't resolve it, visit a repair shop promptly, as driving with a flashing warning light can be distracting and unsafe.

Was this review help?
13
4
Share
Expand All
MacMary
10/31/2025, 10:20 PM

As a daily driver, I find this issue quite annoying, but it can be initially handled on my own. First, make sure the door is properly closed—open it and close it again, listening for the 'click' sound. If there's no sound, the door latch might be stuck. Then, check the warning light on the dashboard. If it's lit, the sensor might be faulty, possibly due to a loose switch module or aging wiring. If you're handy, you can open the door panel to inspect the wiring for wear, but avoid touching it without proper tools to prevent electric shock. I recommend having a technician check this area during regular maintenance. If the light keeps flashing while driving, pull over to ensure the door is securely latched—driving at high speeds with an open door is extremely dangerous.

Was this review help?
20
0
Share
Expand All
MacRebecca
12/14/2025, 09:28 PM

From a technical perspective, a door not closed warning is typically caused by sensor or circuit malfunctions. I would first check if the door switch assembly has poor contact: pry open the door panel to inspect for loose connectors and clean any dirty contact points. It could also be an ECU module false alarm - try disconnecting the battery for a few minutes before reconnecting to reboot the vehicle. Check for blown fuses by locating and replacing the door control fuse in the headlight fuse box. If the issue persists, there's likely a wiring short circuit. Use a multimeter to test current flow, but exercise caution to avoid vehicle damage. For complex system issues, it's best to consult a specialist to prevent further complications.

Was this review help?
2
1
Share
Expand All
More Forum Discussions

Can the car battery be charged at idle speed?

Can the car battery be charged at idle speed? The car battery can be charged at idle speed, but the charging effect is not good. After the engine starts, the electricity generated by the alternator is mainly used to power the vehicle itself, leaving little remaining current. It is only when the engine speed exceeds 2000 RPM that the current becomes sufficient. Therefore, it is not recommended to charge the battery at idle speed. The car battery is charged by the alternator while the vehicle is running, so there is rarely a need for dedicated charging. However, if the battery is severely drained due to an unexpected situation, it should be charged promptly and not solely rely on the car's own charging system. Generally, after the car engine is turned off, the switches of related equipment inside the car should be turned off in time to prevent severe battery drain.
6
5
Share

What are the tips for winter tire maintenance?

Tips for winter tire maintenance include: 1. Use an appropriate tire pressure gauge to check the tires frequently under cold conditions, at least once a month; 2. Maintain the tire pressure at the recommended level, as the vehicle's placard provides the suggested tire pressure levels. Keeping the proper tire pressure is an important way to extend tire life and durability; 3. Regularly visit a 4S shop for professional inspections to understand the tire wear and performance status, so any issues can be detected promptly; 4. After the vehicle is parked, wait for the tires to cool down before inflating them. Pay attention to cleanliness during inflation, and ensure the air being filled does not contain moisture or oil to prevent rubber deterioration and damage inside the tire; 5. If high tire temperature or pressure is noticed during normal driving, avoid splashing water and simply park in a shaded area.
15
1
Share

How Long Should You Wait Between Two Gravity Oil Changes?

Gravity oil changes should be performed every 2 years or 60,000 kilometers. This is because automatic transmission fluid (ATF) and manual transmission fluid are different. ATF not only lubricates but also plays a crucial role in gear shifting. Prolonged intervals between changes can lead to poor lubrication, severe component wear, and shortened transmission lifespan. Additionally, it may cause harsh gear shifting sensations. Therefore, regular transmission fluid changes are essential, and the transmission filter should also be replaced during this service. Brake fluid, also known as hydraulic fluid, is an indispensable component of the braking system. It acts as a force-transmitting medium within the system. Since liquids are incompressible, the pressure generated by the master cylinder is directly transmitted to the wheel cylinders through the brake fluid.
16
0
Share

How to Evaluate a Car's Power?

The methods to evaluate a car's power are: 1. The strength of a car's power mainly depends on the engine power configured in the vehicle—the higher the power, the stronger the performance; 2. Check the peak power and peak torque. Whether it's a turbocharged engine or a naturally aspirated one, a car's power performance primarily relies on the values of peak power and peak torque; 3. Examine the transmission. A car with good power not only requires an engine with impressive parameters but also depends significantly on how well it pairs with the transmission, which affects the limits of power and torque; 4. Consider the dual-clutch transmission. Due to its structure of two sets of clutches, it offers advantages such as short shift times and minimal power loss; 5. Look at the curb weight. The curb weight, commonly referred to as the total weight of the car, is a reference indicator that consumers often overlook.
5
3
Share

How to Reset the Maintenance Light on the Ecosport 1.5?

Method to reset the maintenance light on the Ecosport 1.5: 1. Close all doors and windows; 2. Turn the ignition key to position 2; 3. Simultaneously press and hold the accelerator and brake pedals for 2 to 3 seconds until a prompt appears on the dashboard information center, and maintain this for 25 seconds; 4. After 25 seconds, the word "complete" will appear in English, indicating that the maintenance light has been reset; 5. You can now release the accelerator and brake pedals. The Ecosport 1.5L AT Trend is an SUV model produced by Ford, with body dimensions of 4280mm x 1785mm x 1658mm, a wheelbase of 2530mm, and a ground clearance of 172mm.
2
1
Share

Why is it difficult to shift gears in an automatic transmission?

The reasons for difficulty in shifting gears in an automatic transmission are: 1. Operational issues, where the driver's incorrect operation and mismatched speed and gear can cause difficulty in shifting, which can be resolved as the driver becomes more familiar and proficient with the operation; 2. Clutch factors, such as rust on the transmission shaft, clutch failure, deformation of the clutch pressure plate assembly's drive plate, or excessive clutch gear self-locking force; 3. Transmission factors, including old transmission oil, transmission components not yet run-in, or insufficient viscosity of the gear oil in the transmission, leading to reduced lubrication effectiveness. An automatic transmission eliminates the need for the driver to manually shift gears, as the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.