What to Do When the Damage Assessment Says Repair but I Want Replacement?

1 Answers
KeeganDella
07/30/25 7:17am
If the ruling is for replacement, then your insurance should cover the cost of replacement. The main conflict arises from the discrepancy between the compensation requested and the insurance company's damage assessment. If the insurance company refuses replacement, the best recourse is legal proceedings.
Was this review help?
19
0
Share
More Forum Discussions

How to Replace the Brake Light on a Lavida?

Lavida's brake lights use halogen light sources, which have limited ignition cycles and lifespan, so the brake lights should be replaced promptly. The specific steps to replace the brake light on a Lavida are as follows: 1. The rear tail light assembly is located in the trunk; first, open the trunk. 2. There is a protective pad behind the rear tail light that serves as a protective cover; then, remove the protective pad of the rear tail light. Be careful not to use excessive force when removing the protective pad. 3. After removing the protective pad, you can see the circuit assembly. Use a screwdriver to unscrew the screws on the light and locate the circuit board. 4. Remove the old bulb. 5. Install the new bulb, and the brake light replacement is complete.
8
5
Share

How Often Should Valve Stem Seals Be Replaced?

Valve stem seals generally need to be replaced every 20,000 to 30,000 kilometers. Valve stem seals are a type of oil seal, typically composed of an outer frame and fluororubber vulcanized together. The seal's inner diameter is equipped with a self-tightening spring or steel wire, designed to seal the engine valve guide. Valve stem seals prevent engine oil from entering the intake and exhaust pipes, thereby avoiding oil loss, preventing the leakage of the air-fuel mixture and exhaust gases, and stopping engine oil from entering the combustion chamber. As a critical component of the engine's valve train, valve stem seals are usually made of fluororubber. Over time and under the influence of alternating working temperatures, rubber components lose their plasticizers. Damaged valve stem seals can cause the engine to burn oil, resulting in blue smoke during cold starts, along with symptoms like poor acceleration and engine vibration.
17
5
Share

What engine does the Subaru Impreza WRX STI use?

Subaru Impreza WRX STI uses a 2.5-liter turbocharged horizontally opposed four-cylinder engine and a 2.0-liter turbocharged horizontally opposed four-cylinder engine. Both engines are equipped with multi-point fuel injection technology and feature aluminum alloy cylinder heads and blocks. Both engines are paired with a 6-speed manual transmission. The dimensions of the Subaru Impreza WRX STI are 4580mm in length, 1795mm in width, and 1470mm in height, with a wheelbase of 2625mm. The Subaru Impreza WRX STI features blackened headlights, a sportier mesh grille replacing the standard version's slatted grille, a prominent air intake on the hood indicating its turbocharged nature, a larger lower air intake on the front bumper, fog lights adorned with chrome rings, and air ducts on both sides of the front bumper that provide ample cooling air to the intercooler.
13
0
Share

Is the Subaru BRZ a Sports Car?

Subaru BRZ is a sports car. According to Subaru's official introduction, the Subaru BRZ is a 2-door, 4-seater hardtop sports car. In terms of body dimensions, the Subaru BRZ measures 4240mm in length, 1775mm in width, and 1320mm in height. In terms of power, the Subaru BRZ is equipped with a 2.0-liter four-cylinder naturally aspirated engine across the entire lineup, delivering a maximum power of 147kW and a maximum torque of 205Nm. For the transmission, the Subaru BRZ offers a choice between a 6-speed manual and a 6-speed automatic. According to the comprehensive fuel consumption data from the Ministry of Industry and Information Technology, the manual version of the Subaru BRZ has a combined fuel consumption of 8.2 liters per 100 kilometers, while the automatic version has a combined fuel consumption of 7.5 liters per 100 kilometers.
6
3
Share

How to Open the Fuel Filler Cap on an Audi?

Each Audi model is different, so the method to open the fuel filler cap varies. For the Audi A3, the fuel filler cap release button is located below the driver's seat on the left side, within easy reach of the left hand. There are two buttons, one of which is responsible for opening the fuel filler cap—it is shaped like a fuel pump. The fuel filler cap is located on the rear side of the rear door. Once you pull the release button, the fuel filler cap will open. More related information is as follows: 1. The emblem of Audi consists of four interlinked rings, representing the four companies that merged to form the brand. These companies were originally manufacturers of bicycles, motorcycles, and small passenger cars. 2. Since the company was formed by the merger of four companies, each ring symbolizes one of the original companies.
9
3
Share

Is the Honda Civic Engine an Earth Dreams Engine?

Honda Civic engine is an Earth Dreams engine, which is a 1.5-liter naturally aspirated Earth Dreams engine with an added turbocharger, providing the car with better power and fuel economy. In terms of power, the Civic offers a choice between a 1.0-liter three-cylinder turbocharged engine and a 1.5-liter four-cylinder turbocharged engine. Regarding body dimensions, the Civic measures 4658mm in length, 1800mm in width, and 1416mm in height. As for fuel consumption, according to the Ministry of Industry and Information Technology's comprehensive fuel consumption data, the 1.0-liter version of the Civic consumes 5 liters per 100 kilometers, while the 1.5-liter version consumes 5.4 liters per 100 kilometers. In terms of transmission, the Civic offers a 6-speed manual or a CVT continuously variable transmission.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.