What to Do When the Cigarette Lighter Has No Power?

1 Answers
DiCameron
07/29/25 11:22pm
Cigarette lighter has no power when you need to borrow another cigarette lighter to try to connect. The reasons for the cigarette lighter having no power are: 1. The cigarette lighter is faulty or damaged and needs to be replaced in time; 2. The fuse is blown, and the fuse box needs to be opened for inspection. Precautions for using the cigarette lighter are: 1. Avoid using electrical appliances with too high power on the cigarette lighter; 2. Plug and unplug the cigarette lighter plug reasonably; 3. Try to start the vehicle when using the cigarette lighter for a long time; 4. Unplug the external device of the cigarette lighter in time after parking; 5. Clean the heating wire of the cigarette lighter in time; 6. Avoid foreign objects entering the cigarette lighter hole.
Was this review help?
9
2
Share
More Forum Discussions

What happens when a motorcycle filter is dirty?

When a motorcycle filter is dirty, the following situations may occur: Loss of power and inability to accelerate: A dirty air filter can cause the motorcycle to lose power and make it difficult to accelerate. This results in slower movement and reduced riding time. Increased fuel consumption: A dirty air filter can lead to higher fuel consumption, accelerating the rate at which the motorcycle uses fuel and potentially causing it to stall. Black smoke from the exhaust pipe: A dirty air filter may cause black smoke to emit from the motorcycle's exhaust pipe. If not repaired promptly, this black smoke can pollute the environment.
3
0
Share

Which Fuse to Replace When the Car Won't Start?

Replace the ignition fuse when the car won't start. Solutions for a car that won't start are as follows: Check the battery status: In winter, most cases of difficulty starting a car are caused by a depleted battery or an expired battery lifespan. Use the appropriate engine oil: In winter, as temperatures drop, the viscosity of engine oil increases, making it harder to flow and thus increasing engine resistance. Replace spark plugs promptly: After several years of use, spark plugs are prone to issues such as carbon buildup, leakage, excessive gap, and erosion. These problems can make it difficult to start the car, whether cold or even when the engine is warm, often requiring multiple ignition attempts.
20
4
Share

How Many Points Are Deducted for Driving in Slippers?

Driving in slippers results in a penalty of 2 points. Here are some driving precautions to note: Regularly check tires: Frequently inspect tire pressure, wear level, and any damage. Do not purchase retreaded tires. During high-speed driving, the contact area between the tire and the road is smaller than an adult's palm, so the pressure endured is considerable. Avoid changing lanes arbitrarily: When changing lanes, observe not just the adjacent lane but at least two lanes, as vehicles in other lanes might also move into your intended lane. Remember to wear a seatbelt: This ensures you remain inside the vehicle during an accident, protected by the car body. Driving at high speed without a seatbelt is nearly as dangerous as riding a motorcycle.
16
1
Share

Abnormalities in the Vehicle Braking System?

Car braking system's condition determines the safety of passengers inside the vehicle. Only when it is in a healthy state can it successfully decelerate or even stop the vehicle according to the driver's intention. Therefore, any abnormalities should be repaired immediately. Here are some common abnormalities in the vehicle braking system: 1. If the warning light on the dashboard lights up, it indicates a problem in a certain part of the braking system. You should go to a 4S shop for inspection and repair immediately. Ignoring it and continuing to use the vehicle may lead to unimaginable consequences. 2. After releasing the brake when starting the car, if you notice friction sounds between the brake pads and the brake disc, this is not an abnormal phenomenon. 3. The handbrake cable will lengthen after being used for a period of time, which is also normal. The handbrake cable is composed of multiple metal wires and has a certain degree of elasticity under force. After some time, it will be slightly longer than when the car was new, but this will not affect the parking brake function. 4. Rust on the brake disc may affect its use. The brake disc is mainly made of iron. If the vehicle is not used for a long time, the brake disc will react with oxygen and moisture in the air, causing oxidation, i.e., rust. However, during driving, the rust will be removed through the operation of the braking system, and it will not affect normal use. 5. The brake disc heats up after use. This is because braking is achieved through friction between the brake disc and the brake pads, during which kinetic energy is converted into mechanical energy and heat energy, thus generating some heat.
17
0
Share

How Long Does It Take to Get the Green Book After Paying Off a Car Loan?

After fully paying off your car loan, it typically takes about 10 to 20 days to receive the Green Book. Below are detailed explanations about the Green Book: 1. Definition: The Green Book refers to the 'Motor Vehicle Registration Certificate,' which serves as the vehicle's household registration document. It is the legal proof of vehicle ownership, kept by the owner and not carried with the vehicle. This certificate is required for any vehicle registration procedures such as transfers or ownership changes, and it records all relevant vehicle information. 2. Required Materials for Application: 'Motor Vehicle License Plate and Certificate Application Form,' original and photocopy of the vehicle owner's identity proof, and the Motor Vehicle Inspection Record Form. 3. Conditions for Replacement: If the Motor Vehicle Registration Certificate is lost, missing, or damaged, the vehicle owner must apply for a replacement at the local vehicle management office where the vehicle is registered.
9
3
Share

Where to Inspect a Motorcycle?

Motorcycles should undergo annual inspection at the vehicle management office in the registration location, which is where the license plate was issued. The motorcycle inspection process is as follows: Go to the nearest inspection station: Drive the vehicle to the nearest inspection station. Appearance inspection: Undergo a vehicle appearance inspection, cooperate with staff to fill out the motor vehicle appearance registration form, and take photos. Fee payment and information registration: Proceed with fee payment and information logging. Online inspection: Undergo motor vehicle online inspection. Receive inspection pass sticker: Collect the inspection pass sticker. The vehicle management office should confirm the motor vehicle, review submitted documents and certificates, and issue the inspection pass sticker within one day from the date of acceptance.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.