What to Do When the Cigarette Lighter Doesn't Pop Out?

1 Answers
CharlotteFitz
07/29/25 8:24pm
The solutions for a cigarette lighter that doesn't pop out are as follows: 1. Replace the fuse: If the car cigarette lighter cannot pop out, it may be due to a damaged fuse, which needs to be replaced with a new one. 2. Check the spring: If the issue is with the spring, it can also prevent the lighter from popping out. Frequent insertion and removal of the lighter can easily loosen the spring. In this case, simply remove the lighter and inspect the spring. The usage guidelines for the cigarette lighter are as follows: 1. Unplug external devices before turning off the engine: When the vehicle starts, external devices connected to the lighter can be easily damaged by the high current surge. 2. Avoid leaving external devices plugged into the lighter for extended periods: Depending on the vehicle's settings, some lighters may not power off when the engine is turned off, which can enhance the safety of external devices. 3. Avoid plugging and unplugging while in use: Do not wiggle or unplug external devices while they are in use, as this can deform the plug's curved spring, leading to poor contact and affecting conductivity. 4. Avoid constant impact: Do not repeatedly bump the lighter plug while operating the vehicle, as this can cause it to become loose.
Was this review help?
13
2
Share
More Forum Discussions

Can LED headlights pass the annual vehicle inspection?

According to the new regulations issued by the Ministry of Public Security in 2019, China strictly prohibits the modification of lighting groups. However, as long as the shape and brightness are not excessively altered, they can still pass the annual inspection. Here are the key requirements to follow: 1. Brightness requirement: The brightness should generally be high enough but not too glaring. 2. Height requirement: The lights should not be positioned too high or too low. 3. Color temperature requirement: The light detector can only measure color temperatures up to 6500K; anything higher will not be detected and will fail the inspection. 4. Modification requirement: Installing xenon or LED headlights must include dual-beam lenses to be considered legal.
8
1
Share

What does invalid exhaust emission test mean?

Invalid exhaust emission test refers to the mandatory test during the annual vehicle inspection. If the exhaust emission indicators fail to meet the standards, it is considered an invalid test. Vehicle owners should take this seriously and address the issue promptly. If the vehicle fails the retest for excessive emissions (non-compliance), penalties will be imposed. Introduction to vehicle inspection tips: Clean the throttle once before the inspection; Use 97-octane gasoline in advance. Higher-grade gasoline produces less pollution. If ethanol-blended gasoline is available, it is even better, as it contains 10% ethanol, which can reduce exhaust emissions by 10%; On the way to the inspection station, increase the engine speed. Due to urban traffic congestion, frequent stops and starts lead to incomplete combustion, resulting in pollutants adhering to the surface of the catalytic converter. Higher engine speeds produce the lowest emissions, and the high-speed airflow can also flush away deposits on the catalytic converter; After the exterior inspection, rev the engine hard. Taking a cold vehicle for the inspection is unwise. The reason is simple: the optimal working temperature of the catalytic converter is between 400 to 800 degrees Celsius, and it takes a long time for a cold engine to reach 400 degrees. Revving the engine for a few minutes before the inspection can quickly raise the catalytic converter's temperature above 400 degrees and maintain it for a while; If you suspect your vehicle has issues, you can remove the air filter or spray a small amount of water on it; Replace the catalytic converter if it is severely aged or ineffective. If the catalytic converter is poisoned, purchase a catalytic converter cleaner from the auto parts market and perform a cleaning maintenance on the engine. After maintenance, the exhaust emissions should pass the annual inspection. Notes: If a vehicle fails a random exhaust emission test, the traffic police will temporarily confiscate the vehicle's registration certificate. The owner must carry out repairs and rectifications within 7 days and can only retrieve the registration certificate upon presenting a retest pass certificate. No additional fees are required for the retest. Article 90: If a motor vehicle driver violates the road traffic safety laws or regulations regarding road traffic rules, a warning or a fine ranging from 20 to 200 yuan shall be imposed. If other provisions of this law stipulate otherwise, those provisions shall prevail. Article 95: If a motor vehicle driven on the road does not display a license plate, inspection compliance label, insurance label, or if the driver fails to carry the vehicle registration certificate or driving license, the traffic management department of the public security organ shall detain the vehicle, notify the party to provide the corresponding documents or labels or complete the necessary procedures, and may impose penalties in accordance with Article 90 of this law.
12
2
Share

How to Coordinate the Clutch and Brake Pedals?

The coordination method between the clutch and brake pedals varies depending on different situations: 1. When starting the car: First press the brake, then the clutch, shift into first gear, gently release the clutch until the car body shakes, then release the brake and clutch. 2. When shifting gears to accelerate: Only press the clutch, no need to press the brake. 3. When stopping the car: First press the clutch, then the brake. The clutch is located inside the flywheel housing between the engine and the transmission. It is the assembly component in the car's drivetrain that directly connects to the engine. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. The brake is located below the steering wheel, close to the car's chassis. Its working principle is to use the friction between the brake pads and the brake disc, as well as between the tires and the ground, to create significant friction, converting the kinetic energy of the moving vehicle into heat energy after friction, and stopping the rotating parts through friction.
6
3
Share

Are Newer Tire Dates Always Better?

No. Tires reach their optimal performance when installed after being stored for 8 to 12 months post-production. During this period, internal chemical reactions complete, the structure solidifies, and the tire achieves peak strength, wear resistance, and overall performance. Extended Information: 1. Tire Composition: Tires consist of rubber, fabric plies, steel wires, carbon black, and various additives. These materials undergo vulcanization in a molding press. Freshly manufactured tires contain high oil content, unstable rubber molecules, and incomplete chemical reactions of additives, resulting in suboptimal strength, wear resistance, and performance. Premature installation significantly reduces service life and prevents optimal performance. 2. Tire Lifespan: As rubber degrades over time, tires typically last five years, with a maximum limit of seven years. 3. Replacement Indicators: Inspect tires visually, especially sidewalls, for cracks, damage, bulges, or tread wear beyond safe limits. Immediate replacement is necessary if any such conditions are present.
1
5
Share

How to Conduct Vehicle Inspection with Electronic Insurance Policy?

The following are the relevant materials for electronic insurance policy: 1. Required documents: The vehicle owner needs to bring the compulsory traffic insurance policy (electronic policies in some regions need to be printed out), vehicle and vessel tax invoice, ID card, and vehicle license (if handling on behalf of others, the agent's ID card and a power of attorney for vehicle-related business are required). Go to the vehicle inspection station hall and find the staff. After verification, an admission pass will be issued. 2. Vehicle appearance: The vehicle to be inspected needs to undergo an appearance check, mainly to verify if there are fire extinguishers and triangular warning signs in the car. Check if the vehicle identification number, engine number, color, and appearance match those on the vehicle license. 3. Inspection inside the testing line: The staff will drive the vehicle into the testing line for inspection, and the owner can wait at the final license plate area. The main inspections include exhaust emissions, lights, chassis, etc. As long as the vehicle has not been modified or has any faults, it can basically pass the inspection. If it doesn't pass, there are usually repair shops nearby where you can fix the issues and then return for another inspection.
3
0
Share

Are Pickup Trucks Manual or Automatic Transmission?

Both manual and automatic transmissions are available. Here is the relevant introduction: 1. Pickup Truck: A transliteration of the American term, also known as a car-truck, as the name suggests, it is both a car and a truck. It is a light-duty cargo vehicle with an open cargo box behind the cab, where the side panels of the cargo box are integrated with the cab. It is a dual-purpose passenger and cargo vehicle that resembles a sedan in the front and has a cargo box at the back. 2. Introduction: Pickup trucks are an important part of the automotive market. A pickup (pick-up) is a vehicle that adopts the front end and cab of a sedan while featuring an open cargo compartment. Its characteristics include the comfort of a sedan, strong power, and even greater cargo capacity and adaptability to rough roads compared to sedans. The most common type of pickup truck is the double-cab pickup. Pickup trucks can serve as special-purpose vehicles, multi-purpose vehicles, official vehicles, commercial vehicles, or family cars, used for cargo transport, travel, rental, etc. The so-called "pickup" is a hybrid of a sedan and a truck. With the growing community of modification enthusiasts, pickup truck modifications have become an increasingly popular category. In the United States, pickup trucks are highly popular.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.