What to Do When the Chery Ant Start Button Doesn't Respond?

What Causes the Engine Yellow Light to Illuminate and the Car to Shake?

Reasons for the engine yellow light illuminating and car shaking: 1. Poor combustion of the air-fuel mixture in the engine, resulting in an overly rich mixture in the cylinders; 2. Malfunction of spark plugs, high-voltage wires, or ignition coils; 3. Abnormal fuel supply pressure or failure of the intake pressure sensor. The car engine is the device that provides power to the vehicle, determining its power, fuel efficiency, stability, and environmental performance. Depending on the power source, engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid systems. Common gasoline and diesel engines are both types of reciprocating piston internal combustion engines, which convert the chemical energy of fuel into the mechanical energy of piston movement to deliver power output.

5

3

Share

What are the symptoms of a faulty sensor in a Toyota Crown?

Toyota Crown faulty sensor symptoms: 1. Unstable engine idle; 2. Momentary stalling or engine shutdown when starting or decelerating to stop; 3. Decreased engine acceleration performance; 4. Deviation in the speedometer display; 5. Illuminated engine warning light. The Crown is a mid-to-large-sized car brand under the Toyota Group, equipped with the Dual VVTi intake and exhaust valve bidirectional intelligent variable timing system. In terms of body dimensions, the Toyota Crown measures 5020mm in length, 1805mm in width, and 1480mm in height, with a wheelbase of 2925mm.

1

Share

Why does the scooter suddenly stall and fail to start?

The reasons why the scooter suddenly stalls and fails to start are as follows: 1. The vehicle battery is dead or damaged: The battery life has expired, or the battery is damaged due to prolonged parking of the vehicle; Battery depletion may be caused by leaving the headlights on for a long time or continuously using high-power audio and other high-power consumption entertainment systems when the vehicle's ignition switch is turned on but the vehicle is not started. 2. Excessive carbon deposits in the vehicle's engine can also cause difficulty in ignition: This may be related to poor fuel quality or poor sealing of the valve port. 3. Ignition system failure: Poor connection of the low-voltage circuit wires or leakage of high-voltage wires can cause this fault. 4. Severe aging of the starter: That is, the vehicle has been used for too long, causing the starter to gradually age, resulting in weak starting and failure to ignite. 5. Too low temperature: In the cold winter, the viscosity of the car engine oil changes, causing the speed to be too low to drive the engine to ignite. 6. The vehicle is out of fuel or the fuel pump is damaged, preventing the vehicle from starting. 7. Gear problem: For automatic transmission models, the gear must be placed in P or N when starting the ignition. If it is placed in R or D, the start will fail. Some manual transmission vehicles will also be affected if the clutch is not pressed when starting.

2

4

Share

What is the introduction of the gears for the Odyssey automatic transmission car?

The introduction of the gears for the Odyssey automatic transmission car is as follows: 1. P gear: This is the gear used for long-term parking. It is generally used in conjunction with the N gear. When the P gear is engaged, components like the transmission are directly locked, which also prevents the car from rolling. 2. R gear: This is the reverse gear. This gear is the same for both manual and automatic transmission cars. It is used when reversing, and it is generally engaged after the car has come to a complete stop. 3. N gear: This is useful for short-term parking. It is also used in conjunction with the P gear for long-term parking. 4. D gear: This is the most commonly used forward gear. This gear is often used by drivers regardless of road conditions, whether going uphill or downhill, which is not scientific. 5. S gear: This is the sport mode. When this gear is engaged, the engine can provide more powerful performance. It is generally used when overtaking, as it can be more fuel-efficient compared to the D gear with heavy acceleration. It also allows for quicker acceleration. 6. L gear: This is the low-speed gear. When going downhill or uphill, engaging this gear can better utilize the engine's power for braking or fuel efficiency. When going downhill, it can lower the engine speed and use the engine for braking, reducing the need for constant heavy braking. 7. M gear: This is the manual mode in cars with a manual-automatic transmission. Engaging this gear allows the driver to switch to manual driving mode.

20

3

Share

What is the fuel tank capacity of the 2021 14th-generation Sylphy?

The 2022 Sylphy Classic 1.6XE manual comfort version has a fuel tank capacity of 50L. It is equipped with a 1.6L naturally aspirated engine and a 5-speed manual transmission (MT). The drivetrain is front-engine, front-wheel drive. The front suspension is MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension. In the same vehicle class, the 2021 Buick Excelle facelift 1.5L automatic entry model has a fuel tank capacity of 44L, while the 2022 Lavida 1.5L manual basic version has a fuel tank capacity of 51L. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by automakers is measured from the bottom of the tank to the safety limit level, and there is additional space from the safety limit to the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing from the tank. If fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the marked fuel tank capacity. To check the remaining fuel level, owners can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the needle is close to E, it indicates low fuel, and when it approaches F, it means the fuel level is sufficient.

4

2

Share

What is the emission standard of the Baojun 510?

Baojun 510 complies with the China V emission standard. It is equipped with a 1.5L naturally aspirated engine, utilizing General Motors' core technology, paired with a 6-speed manual or 5-speed automated manual transmission. This setup not only reduces harmful gas emissions but also ensures smoother and more stable power output. Vehicle emission standards regulate the levels of harmful gases such as CO, HC plus NOx, and PM emitted from vehicle exhaust. The Baojun 510 is a compact SUV introduced by SAIC-GM-Wuling, targeting the younger demographic with its avant-garde and stylish design, practical and abundant features, and comfortable and easy-to-drive handling. In terms of body dimensions, the Baojun 510 measures 4220mm in length, 1740mm in width, 1625mm in height, with a wheelbase of 2550mm.

15

1

Share

What to Do When the Chery Ant Start Button Doesn't Respond?

What Causes the Engine Yellow Light to Illuminate and the Car to Shake?

What are the symptoms of a faulty sensor in a Toyota Crown?

Why does the scooter suddenly stall and fail to start?

What is the introduction of the gears for the Odyssey automatic transmission car?

What is the fuel tank capacity of the 2021 14th-generation Sylphy?

What is the emission standard of the Baojun 510?

What are the symptoms of a faulty BMW solenoid valve?

What type of engine oil is suitable for the Kia KX3 Seltos?

What is the size of the tire bolts?

Will Manually Adjusting Electric Car Mirrors Cause Damage?