What to Do When the Changan CS35 Battery Runs Out of Power?

1 Answers
LeMary
07/29/25 6:34pm
Solutions for a dead battery in the Changan CS35: 1. Towing start - requires another vehicle to slowly start after securely fastening the tow rope, with the driver of the towed vehicle shifting into 1st gear to rotate the crankshaft via the towed wheels, thereby compressing the air-fuel mixture; 2. Jump-start - align the fronts of both vehicles, open the hoods, and connect the positive terminals to positive and negative to negative using jumper cables; 3. Carry an emergency power starter for temporary use when the vehicle has no power. The Changan CS35 is the first SUV independently developed by Changan Automobile, with body dimensions of 4160mm in length, 1810mm in width, 1670mm in height, and a wheelbase of 2560mm.
Was this review help?
18
2
Share
More Forum Discussions

How Many Kilometers Can You Drive When the Fuel Light Comes On?

When the fuel light comes on, a car can typically travel approximately 30-80 kilometers. Below is more information about the fuel light: 1. Introduction: The fuel gauge light is one of the essential components in a car, primarily used to monitor the remaining fuel level in the gas tank. 2. Consequences: Running a car until it's out of fuel can cause damage, potentially harming the fuel pump. Therefore, it is recommended not to wait until the fuel is almost empty before refueling. Generally, when the fuel pump is exposed above the fuel level, the fuel gauge light will alert the driver. This is because the fuel pump operates while being cooled by the fuel in the tank. Thus, when the fuel level continuously drops below a certain point, it can damage the fuel pump and reduce its lifespan. 3. Refueling: When refueling, avoid filling the tank to the brim. In high-temperature summer conditions, gasoline can evaporate into vapor, and with no extra storage space in the tank, this not only pollutes the environment but also increases fuel consumption. In winter, overfilling the tank can damage the car and fill the interior with the smell of fuel, which can affect passengers. Additionally, there is a risk of danger if exposed to open flames. It is generally advised to refuel when the fuel level drops to one-quarter and to fill the tank only to 80%-90% capacity.
13
0
Share

What Maintenance is Required After a Car Reaches 40,000 Kilometers?

After a car reaches 40,000 kilometers, the required maintenance items mainly include changing the engine oil, three filters, and all vehicle fluids, as well as some essential routine inspection items such as replacing brake fluid, transmission fluid, power steering fluid, and coolant. The following is an introduction to car maintenance: 1. Definition of Car Maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 2. Scope of Car Maintenance: Modern car maintenance mainly includes the maintenance of the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. Purpose of Car Maintenance: The purpose of car maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate hidden dangers to prevent failures, slow down the deterioration process, and extend the service life.
8
4
Share

Where to Add Windshield Washer Fluid in the Encore?

The windshield washer fluid reservoir in the Encore is located in the engine compartment, with a dedicated filler opening. Here are some key features of windshield washer fluid: 1. Cleaning Performance: Windshield washer fluid is formulated with multiple surface-active agents and additives. These surfactants typically provide wetting, penetrating, and solubilizing functions, effectively removing dirt and grime. 2. Antifreeze Performance: It significantly lowers the freezing point of the liquid, preventing freezing and quickly dissolving frost. 3. Anti-fog Performance: Forms a monomolecular protective layer on the glass surface. This protective film prevents fog droplet formation, ensuring clear visibility through the windshield.
5
3
Share

Where is the coolant reservoir located on the Hyundai Elantra?

The coolant reservoir on the Hyundai Elantra is located in the pink liquid container on the right side of the engine. Here is more information about the automotive coolant system: 1. Introduction: The automotive coolant reservoir, also known as the radiator, is a key component of the vehicle's cooling system and an integral part of the engine. 2. Function: Its purpose is to dissipate heat. Coolant absorbs heat in the water jacket, flows to the radiator to release heat, then returns to the water jacket to complete the circulation cycle for temperature regulation. 3. Working Principle: When the engine temperature rises, the water pump circulates coolant to lower the engine temperature and protect the engine. In winter when coolant temperature is too low, the circulation stops to prevent the engine from becoming too cold.
20
3
Share

Where is the air conditioning filter of Peugeot 3008 located?

The air conditioning filter of Peugeot 3008 is generally located near the glove compartment on the passenger side. You can see it by opening the glove compartment slightly. The following are the functions of the air conditioning filter: 1. Filtration: The most important function of the air conditioning filter is to filter dust from the air, preventing dust from entering the evaporator and forming sludge that can block it. If the airflow from the vents is noticeably reduced, it indicates a blockage. 2. Purification: Another function is air purification. The air conditioning filter usually contains activated carbon, which can absorb some harmful gases in the air, benefiting health. 3. Air conditioning design: In the design and manufacturing of air conditioners, the temperature is generally allowed to be controlled between 16-32℃. If the temperature is set too low, it not only increases unnecessary power consumption but also causes a significant temperature difference between indoor and outdoor environments. This makes it difficult for people to adapt quickly to temperature changes when moving between rooms, increasing the risk of catching a cold.
20
3
Share

What are the differences between imported and domestically produced Mercedes-Benz E-Class?

Mercedes-Benz E-Class imported and domestically produced differences lie in some luxury configurations and different serial codes. Below are relevant introductions regarding the differences between imported and domestically produced Mercedes-Benz E-Class: 1. Exterior aspects: The new E-Class convertible and coupe versions adopt a front face design highly consistent with the new E-Class sedan version, especially the new integrated-style headlight clusters that use LED lights for zonal division to outline a "four-eye" effect. Unlike the E-Class sedan version, the convertible/coupe versions all feature a single-slat design for the grille, with the large three-pointed star emblem positioned above the grille, appearing more sporty. 2. Interior configurations: The all-new Mercedes-Benz E-Class convertible offers top-tier comfort features, providing practicality suitable for all seasons for drivers and passengers. The world's first AIRCAP automatic wind deflector combines practicality with aesthetic appeal. With just a touch of a button, a spoiler rises at the top of the front windshield and between the two rear seats, altering the direction of airflow and creating a warm, comfortable space inside the car, significantly enhancing ride comfort during long journeys.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.