What to Do When the Central Control Screen of Changan CS75 Goes Black?

2 Answers
SabrinaLynn
07/25/25 4:45am
The central control screen going black can be resolved through the following methods: 1. Restart the central control screen. 2. Disconnect the negative terminal of the battery for three minutes, then restart the central control screen. 3. Check if the host power supply is properly connected. If there is a loose connection, ensure the power lines are securely connected. 4. Inspect the power signal line for aging. If aging is detected, replace the power signal line promptly. 5. Press the reset button to restore factory settings. 6. Visit a car 4S store for professional repair. Below is an introduction to the central control screen of the Changan CS75: 1. The central control screen is a 10-inch LCD screen, simple and elegant, with clear visuals. 2. The central control screen allows viewing of the full 360-degree vehicle image. When the speed is below 30 mph, turning on the left or right turn signal automatically switches the screen to show the corresponding side road conditions, enhancing safety during turns.
Was this review help?
1
5
Share
EleanorLee
08/10/25 5:30pm
While driving my Changan CS75, the central control screen suddenly went black. After researching for a long time, I found that the reasons could be varied. It might be due to a blown power fuse, which is the most common cause. Check the fuse box under the steering wheel, locate the one labeled for the central control, and try replacing it with a new fuse of the same specification. Alternatively, it could be a software crash; turning off the engine and waiting a few minutes before restarting can reboot the system and solve the problem. Hardware issues like a damaged screen or loose wiring connections might also cause the black screen, requiring the dismantling of the central console to inspect the wiring harness connections. However, DIY attempts can easily damage the car, so it's recommended to seek professional inspection at a 4S shop. I usually pay attention to regularly updating the software and cleaning the screen to avoid dust accumulation that could lead to malfunctions. These small habits can significantly reduce central screen issues. If you encounter a black screen, don’t panic; first, pull over safely before taking any action.
Was this review help?
9
4
Share
Expand All
More Forum Discussions

How Many Lumens for Car LED Headlights?

Lumens of car LED headlights: 1. The first type is the original halogen bulb, with a 55w halogen bulb producing 1000 lumens. Halogen technology is mature, leaving little room for brightness improvement. 2. The second type is xenon headlights, with a 35w xenon bulb producing 3500 lumens, achieving 100 lumens per watt. 3. The third type is LED headlights. A 35w LED light produces 3200 lumens, achieving 91 lumens per watt. Below is related information about LED headlight lumens: 1. Xenon headlights are categorized into 120V, 240V, and 380V, with wattages ranging from tens to thousands of watts. 2. Automotive xenon headlights are improved versions of industrial xenon headlights, operating at 12V with wattages of 35W and 55W. Most vehicles use 35W, while a few use 55W, typically installed in high beams. 3. The lumen range is 3500-5500.
2
2
Share

What brand is Sailun tire?

Sailun tire is a brand of Sailun tires. The following is relevant information about Sailun: 1. Sailun Group was established in 2002, mainly engaged in the production and operation of all-steel, semi-steel, and engineering radial tires. 2. Sailun is a Malaysian brand, later acquired by Qingdao Jinyu Group. 3. Sailun tires are independently developed and produced by Sailun Group, primarily manufacturing radial tires. The company integrates tire research and development, production, sales, and services. Radial tires are further divided into four categories. 4. These include all-steel radial tires for heavy loads, semi-steel radial tires, engineering radial tires, and retreaded tires. Sailun tires enjoy high recognition, and their sales market currently covers more than 100 countries and regions, including Europe, America, Asia, and Africa.
3
0
Share

Differences Between Right-Side and Left-Side Reverse Parking

The differences between right-side and left-side reverse parking are as follows: 1. The steering wheel turning directions are different. For right-side parking, turn the steering wheel fully to the right; for left-side parking, turn it fully to the left. 2. In right-side parking, observe the left rearview mirror - turn the wheel fully right when the mirror's lower edge passes the right boundary line, then enter the space. 3. For left-side parking, observe the left rearview mirror about 10cm earlier compared to right-side parking. Precautions for reverse parking: 1. Generally start in 1st gear; avoid selecting wrong gear. 2. Don't turn the steering wheel in wrong direction: both hands turn right when approaching, single hand turns left when reversing. 3. Slowly release the clutch to prevent stalling. 4. When controlling speed well, turn the steering wheel as quickly as possible. If conflicting, prioritize speed control. 5. When stopping unexpectedly, also release clutch slowly to avoid stalling. 6. Never misidentify poles and strictly prevent car from hitting them. 7. When returning the steering wheel, don't miscount turns. 8. Stay relaxed and maintain an easy-going attitude. 9. Wear thick-soled sneakers.
5
3
Share

Is it necessary to transfer compulsory insurance for a used motorcycle?

Yes, it is necessary. If the compulsory insurance purchased by the original owner of the vehicle follows the vehicle, the compulsory insurance will be transferred to the new owner when the vehicle is transferred. If the compulsory insurance does not follow the vehicle, the owners still need to go to the insurance company to complete the transfer procedures for the vehicle insurance. The owner needs to prepare the vehicle registration book, the new owner's driving license, copies of the new and old owners' ID cards, the invoice issued during the used vehicle transaction, and the amendment application form provided by the insurance company to complete the transfer of compulsory insurance. Important Notes Once you purchase a used vehicle, complete the transfer procedures for compulsory insurance and other insurances as soon as possible. Otherwise, in the event of an accident, the beneficiary will still be the original owner, and the new owner will not be able to receive compensation. Compulsory Insurance for Automobiles: The full name of compulsory insurance is "Compulsory Traffic Accident Liability Insurance for Motor Vehicles." It is a mandatory liability insurance where the insurance company compensates for personal injuries, deaths, and property losses of victims (excluding vehicle occupants and the insured) caused by road traffic accidents within the liability limits. The premium is based on the nationally unified standard rates. However, the price of compulsory insurance varies for different vehicle types, mainly influenced by the number of car seats. Compared to the more than 20 exemption clauses in commercial third-party liability insurance, compulsory insurance covers a much broader range, including losses caused by intentional acts of the victim, the insured's own property losses, related arbitration and litigation costs, and certain indirect losses caused by the accident. Moreover, regardless of whether the insured vehicle is at fault in the accident, compulsory insurance will provide compensation within the liability limits, with no deductible or exemption. Introduction to Electronic Insurance Policies An electronic insurance policy refers to a digital policy issued by an insurance company using digital signature software and enterprise digital certificates that comply with the PKI system, bearing the electronic signature of the insurance company. An insurance policy, abbreviated as a policy, is the formal written proof of an insurance contract between the insurer and the insured. The policy must fully record the rights, obligations, and responsibilities of both parties to the insurance contract. The content recorded in the policy serves as the basis for both parties to fulfill the contract. The policy is proof of the establishment of the insurance contract. Advantages of Electronic Insurance Policies: Saves paper resources, eliminating the need to print insurance proof labels; Time-saving and convenient, not restricted by time or location, with information universally accessible online anytime, fast and easy; Can apply for reissuance or resending, no need to worry about losing it, and if a paper version is needed offline, it can also be printed or mailed; Easy management, with electronic unification making it convenient for insurance companies and traffic police departments to manage the insurance information of various vehicles.
14
2
Share

Where is the fuel filler door switch on the Malibu?

The fuel filler door switch on the Malibu is integrated with the central locking system. Once the central locking is unlocked, the fuel filler door switch lock will also be released, and you can simply press the fuel filler door to open it. Here is some information about fuel filler door switches: 1. Fuel filler door switch locations are categorized into: in-car switch operation and push-to-open operation. 2. In-car switch operation: This is currently the most common method to open the fuel filler door. The in-car switch is located in different positions depending on the vehicle model - some are on the floor to the left of the driver's seat, some on the left front door panel or on the center console, all marked with a fuel pump icon. 3. Push-to-open operation: This is currently the most convenient method, where the driver simply parks the car and the fuel attendant can directly open the fuel filler door to refuel.
1
2
Share

What are the common faults in a car's ignition system?

The common faults in the ignition system are insufficient ignition energy or complete failure to ignite. Below is more information about the ignition system: 1. The car's ignition system mainly consists of spark plugs and ignition coils. Spark plugs are components that require regular replacement. If spark plugs are used for a long time without replacement, the electrode gap will increase, which can affect the spark plug's ignition. Additionally, prolonged use without replacement can lead to carbon buildup on the spark plug electrodes, which also affects ignition. 2. Although the ignition coil is not a wear-prone part, faults can occur due to prolonged operation in high-temperature environments. The ignition coil converts 12V voltage into tens of thousands of volts, which is necessary for the spark plug to have sufficient ignition energy. If the ignition coil fails, it may cause a misfire, where one of the engine's cylinders stops working. This can affect the engine's power output and smooth operation.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.