···
Log in / Register

What to Do When the Car Windshield Doesn't Clean Properly?

4 Answers
McJuniper
09/06/25 7:01am

Solutions for a car windshield that doesn't clean properly are as follows: 1. Check if the windshield wipers are aged or damaged, which may cause the front windshield to not clean properly. If the wipers are aged, they need to be replaced. If the wipers are still effective and show no signs of aging, extending their usage time might be acceptable. However, the most important factor is the condition of the wipers themselves. If they are less than a year old but already show significant cleaning issues during operation, replacement is necessary. 2. Alternatively, you can use toothpaste or a cleaning agent. Apply a small amount of toothpaste or cleaning agent to the stained areas, then gently wipe with a soft towel dampened with water to easily clean the windshield.

Was this review help?
2
1
Share
SanLiam
09/18/25 6:41am

A dirty car windshield is indeed frustrating. As an experienced driver, I've encountered this situation countless times. The most common cause is aged or torn wiper blades—over time, the rubber hardens and fails to clean stains properly. Another possibility is oil film buildup on the glass from road exhaust and dust, especially noticeable after highway driving in the rain. I recommend first using a professional oil film remover to wipe the glass; if that doesn't work, replace the wiper blades. Don’t overlook the washer nozzles—they might be clogged or misaligned, so try adjusting them slightly higher. If none of these solutions work, the issue might be with the water pump, requiring a visit to a repair shop. Remember, poor visibility increases accident risks—don’t cut corners with DIY fixes. Develop a habit of checking wiper blades quarterly and using high-quality washer fluid to ensure safer driving.

Was this review help?
7
3
Share
Expand All
TimothyAnn
11/01/25 7:08am

As someone who loves tinkering with cars, I start with the basics when the windshield isn't cleaning properly. First, check if the fluid in the washer reservoir is concentrated enough—watered-down or low-quality products simply won't foam. Clogged nozzles are common; use a needle or soft-bristled brush to clear them, ensuring even water spray. For oily residues on the glass, I prefer scrubbing with white vinegar or alcohol—cheap and eco-friendly. If the wiper blades are warped or worn, just spend a few bucks on new ones; replacement is easy DIY. Avoid washing windows immediately after summer drives, as heat makes residues harder to remove. These methods save money, but persistent issues might indicate pump or wiring faults—that's when pros are needed. Regular maintenance is key; don't wait until visibility suffers.

Was this review help?
7
4
Share
Expand All
LaCharles
12/15/25 7:16am

A dirty windshield is annoying, and choosing the right products is crucial. I used cheap washer fluid before, which always left streaks and a film. Switching to a formula with detergents made an immediate improvement. If the nozzle position is off, it can spray everywhere—try adjusting it higher to aim at the center. Glass oil film is the number one enemy, as it accumulates pollutants from daily driving, so regular cleaning with a professional cleaner is a must. Replace the wiper blades with OEM parts every six months for durability and reliability. Don’t forget to check the washer fluid level to ensure the system works properly. These small details save hassle and effort, keeping your view clear with proper maintenance.

Was this review help?
12
2
Share
Expand All
More Forum Discussions

Is it a violation if the entire vehicle crosses the stop line and then brakes at a red light?

If the vehicle has just crossed the stop line at a red light but stops immediately, this type of running a red light will not be penalized. However, if there is significant movement after crossing the line, it will be subject to penalties. The dangers of running a red light include: 1. Personal safety: Running a red light endangers one's own personal safety; 2. Pedestrians running red lights: Pedestrians running red lights pose a significant threat to vehicles. Drivers usually take emergency braking or evasive actions to avoid pedestrians, which can lead to accidents such as rear-end collisions, crashes, or rollovers; 3. Disrupting order: Running a red light disrupts traffic order.
8
2
Share

What is the difference between DEF driver's licenses?

The difference between motorcycle DEF licenses lies in the types of vehicles they permit to drive. Below are the relevant introductions: 1. D license: The D license is for ordinary three-wheeled motorcycles. 2. E license: The E license is for ordinary two-wheeled motorcycles. 3. F license: The F license is for light motorcycles, also known as motorized bicycles. 4. Motorcycle: A motorcycle is a two or three-wheeled vehicle driven by a gasoline engine, steered by handlebars, and is light, flexible, and fast. It is used for patrols, passenger and cargo transportation, and also as sports equipment. Motorcycles are divided into: street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes. A motorcycle consists of five parts: the engine, transmission system, running gear, steering and braking systems, and electrical instrumentation equipment.
10
2
Share

Where is the brake light switch on a Volkswagen Jetta?

The brake light switch on a Volkswagen Jetta is located inside the cover panel above the brake pedal. Brake lights are generally installed at the rear of the vehicle and are red in color to enhance the penetration of the light source. This allows vehicles behind to easily detect when the front vehicle is braking, even in low visibility conditions, helping to prevent rear-end collisions. Here is additional information: Classification of automotive lights: 1. Headlights: Combined headlights are located at the front of the vehicle and primarily serve for illumination and signaling. The light emitted by headlights illuminates the road ahead, enabling safe driving at night. 2. Combined taillights: Combined taillights are located at the rear of the vehicle and mainly serve for illumination and signaling. 3. Turn signals: Used to indicate left or right turns to other road users. Regulations require these to be amber in color. 4. License plate lights: These primarily illuminate the license plate, allowing people to identify the vehicle's license plate at night.
19
2
Share

Is it necessary to install front and rear dash cams?

It is recommended to install them. Dash cams record the entire driving process, which can help restore the truth in case of an accident and quickly determine liability. Below is an introduction to dash cams: 1. Concept: A dash cam is a device that records images, sounds, and related information during vehicle operation. Once installed, it can capture the entire driving process in video and audio, providing evidence for traffic accidents. 2. Functions: Protect the legal rights of drivers. In case of a collision with pedestrians crossing the road or cyclists and motorcyclists, drivers might face extortion. A dash cam can provide valid evidence for the driver. It can also be used at home as a DV to record life moments or as a home surveillance device. Additionally, it can serve as a parking monitor.
15
2
Share

What are the reasons for ETC not responding?

ETC not responding can be due to the ETC device being out of power or the card being inserted incorrectly. Below are the relevant explanations: 1. Incorrect card insertion: If a solar-powered ETC device does not respond when inserting the card, you need to remove the card, flip it, and insert it into the other side of the ETC device. If the display lights up and shows the balance, it means the card has been successfully inserted. 2. ETC out of power: If a battery-powered ETC device does not respond when the card is inserted correctly, you need to visit the service location to have the staff handle it, as the owner cannot charge it themselves. ETC refers to the Electronic Toll Collection system, which involves dedicated short-range communication between the vehicle-mounted electronic tag installed on the windshield and the microwave antenna in the ETC lane at toll stations on highways or bridges. It uses computer networking technology to process backend settlements with banks, allowing vehicles to pass through highway or bridge toll stations without stopping to pay the fees.
16
3
Share

Can a Car Start Normally If the Spark Plug is Broken?

Can a car start normally if the spark plug is broken? However, a damaged spark plug can directly cause issues such as leakage in the vehicle's ignition system, increased fuel consumption, reduced power, and most importantly, difficulty in ignition, affecting the normal operation of the vehicle. Severe erosion of the spark plug, such as scarring at the top, damage, or melting and erosion of the electrodes, indicates that the spark plug is damaged and should be replaced. Steps to replace a spark plug: Open the engine hood, lift the plastic cover of the engine, and remove the high-voltage wires. Mark the position of each cylinder to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure they are cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage wires in the firing order, and then secure the cover.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.