What to Do When the Car Windows Are Fogged Up?

1 Answers
MacMatteo
07/24/25 9:26am
Fogging occurs due to excessive humidity and the significant temperature difference between the inside and outside of the car. Fog can obstruct the driver's vision and pose safety hazards. Here are some methods to defog: 1. Use Warm Air to Defog: In cold winter weather, many people use warm air, making it the most suitable method for defogging. However, warm air should not be used after fog has already formed. Turning on the heater while driving when the windows are already fogged can worsen the fogging, especially in rainy conditions with high humidity, instantly turning the windshield into frosted glass, which is very dangerous. Therefore, it is recommended not to use warm air to defog the windshield while driving. Instead, it's best to dry the windows with warm air before starting the drive. 2. Use Defogging Products: There are many defogging products available now. Spray them onto the windshield, then wipe and spread evenly with a cloth. While cleaning the glass, these products also form a thin, transparent protective film that prevents moisture from condensing on the glass and forming fog. This method can effectively last for about one to two weeks, making it quite convenient. 3. Use Air Conditioning to Defog: This method is widely known. When the windows are fogged, turn on the air conditioning to blow air onto the glass. The vents below the windshield will direct a strong airflow to quickly remove moisture and reduce the temperature difference between the inside and outside of the glass, effectively eliminating fog. This method works quickly but is impractical in winter as it can make passengers feel cold. Additionally, repeatedly turning the air conditioning on and off can pose safety risks while driving. It is generally suitable for temporary use during rainy conditions. 4. Open Windows to Defog: This method involves opening both side windows to allow air circulation, equalizing the temperature inside and outside the car, which makes the fog disappear. However, this is only suitable when the fog is not too heavy and the temperature is not too low. It is not recommended during rain, low temperatures, or when driving at high speeds.
Was this review help?
1
3
Share
More Forum Discussions

What does R.N.D.S on a car mean?

These are the gears of an automatic transmission car. R stands for Reverse, D for Drive, N for Neutral, and S for Sport mode. Here is a detailed introduction to these gears: 1. R gear: Reverse gear, used when you need to reverse. However, make sure the car has come to a complete stop before shifting to R gear. 2. D gear: Drive gear. The number of forward gears corresponds to the number of gears the car has. For example, a common 6-speed automatic transmission has six forward gears, excluding N and R gears. 3. N gear: Equivalent to the neutral gear in a manual transmission, used for short waits, such as at traffic lights. Shift to N gear and apply the handbrake. 4. S gear: Sport mode, where the engine shifts gears only when the RPM exceeds 3000 or 4000, providing the car with greater horsepower and torque.
4
3
Share

What Causes Engine Noise When Accelerating?

Engine noise when accelerating may be caused by the following reasons: 1. Deteriorated engine oil. Engine oil is known as the "blood" of a car. If the oil hasn't been changed for a long time or has deteriorated, it will increase friction between cylinder valves and guides, as well as in hydraulic lifters, resulting in abnormal noise when accelerating. 2. Faulty drive shafts. Under long-term torsional fatigue and impact forces, drive shafts are prone to bending, twisting, breaking, or wear and misalignment of spline teeth. This can cause rhythmic shaking of the car's front end accompanied by abnormal noise when accelerating within a certain speed range, with the shaking disappearing or reducing when releasing the accelerator. 3. Loose or slipping belt. A slipping belt will produce abnormal noise. Once a belt slips, the resulting friction heat will cause the belt to stretch further, worsening the slipping and creating a vicious cycle. Solution: Visit an auto repair shop to check and replace engine oil, inspect drive shafts, and adjust or replace belts.
13
2
Share

Does a New Car Need Tire Pressure Adjustment?

Generally, there is no need to adjust the tire pressure for a new car as long as it remains within the normal range. Here are the relevant details: 1. The recommended tire pressure for most models on the market is between 2.5-2.7 bar. When picking up a new car, simply follow the manufacturer's recommended value. The recommended tire pressure may vary for each vehicle. The standard tire pressure for a vehicle can be found in the owner's manual, on the lower side of the B-pillar, or inside the fuel filler cap. 2. Whether tire pressure adjustment is necessary depends on environmental factors. Since tire pressure is not constant, it can be affected by road surface temperature or tire surface temperature. In summer, when the ground temperature is very high, the air inside the tires expands, increasing the volume, which in turn raises the tire pressure. In winter, lower temperatures cause the air in the tires to contract, reducing the tire pressure accordingly. Additionally, high-speed driving causes continuous friction between the tires and the road, which can also increase tire pressure.
15
0
Share

What brand is the Bora's audio system?

Volkswagen Bora's audio system is provided by the manufacturer, and the producer is Jiangsu Tianbao Automotive Electronics Co., Ltd. More relevant information is as follows: 1. Jiangsu Tianbao Automotive Electronics Co., Ltd. (formerly known as Xuzhou Xugang Electronic Enterprise Co., Ltd.) not only supplies domestic well-known automobile manufacturers but also exports its products overseas. 2. Tianbao Company was established in 1986, and the "Tianbao" brand car audio produced by the company has been rated as a famous brand product in Jiangsu Province many times. In 2005, Tianbao was acquired by Yanfeng Visteon. The company's headquarters is located in Xuzhou, Jiangsu (only 55 minutes by plane to Shanghai), and has three subsidiaries in Chongqing, Changchun, and Shenzhen. With a history of more than 20 years, the company has secured a stable position in the Chinese market and has been recognized by its competitors. Tianbao Company has always been among the top three Chinese car audio manufacturers.
6
4
Share

How many tons can a front-four-rear-eight truck carry?

The traffic department requires that the total weight of a front-four-rear-eight truck should not exceed 40 tons. Below are the relevant details: 1. Traffic department regulations: Based on the standard of not exceeding 30% overload, the front-four-rear-eight truck has a load capacity of 38 tons, and with a 30% overload, it can carry up to 49.4 tons. 2. Front-four-rear-eight: Simply put, it is a category of commercial vehicles, meaning the front steering wheels consist of two axles with four wheels, and the rear drive wheels consist of two axles (bridges) with each set having dual wheels, totaling eight wheels. 3. Types: Common "front-four-rear-eight" vehicles include various dump trucks, heavy-duty trucks, and trailer trucks. These vehicles belong to the heavy-duty category, with large carrying capacities, and are often used for construction, transportation, and other purposes.
20
4
Share

Why does the car shake severely when driving at 100 to 120 km/h?

The reasons for severe shaking when the car is driven at 100 to 120 km/h are as follows: 1. Excessive carbon deposits: If there is severe carbon buildup in the engine cylinders, it can cause spark plug blockage and valve blockage, directly leading to shaking during idling. If the car's acceleration performance has significantly declined and the shaking is persistent, the engine cylinders need to be cleaned. 2. Fuel system failure causing unstable oil pressure: Unstable oil pressure can lead to inconsistent concentration of the air-fuel mixture, not only causing shaking but also resulting in unstable idling. First, consider replacing the fuel filter, then check the oil pressure that bypasses the fuel filter. If abnormal, the fuel pump may be the issue. 3. Aging engine mounts: If the engine shaking becomes increasingly severe but the power does not weaken accordingly, it is mostly due to problems with the engine mounts. 4. Misfire or cylinder failure: The issue lies with the engine ignition coil or spark plugs. If the ignition coil fails or the spark plugs cannot fire for some reason, the car will experience shaking.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.