···
Log in / Register

What to Do When the Car Window Is Left Open and Gets Wet from Rain?

3 Answers
Jeffrey
07/29/25 5:47pm
Methods to deal with a car window left open and getting wet from rain: 1. If only the surface is wet, simply air-dry or blow-dry it; 2. If the wetness penetrates deeply or soaks through, it is necessary to remove the fabric or PU leather covers, take out the rear seats, and thoroughly dry them. The same applies to leather seats. If not dried promptly, internal moisture can spoil and produce odors. Car windows are an essential part of the vehicle body, designed to meet the needs of interior lighting, ventilation, and visibility for drivers and passengers. Depending on the installation position of the glass, car windows include front and rear windshields, side windows, and door windows. The design, structure, and quality of the windows significantly impact the driver's visibility, passenger comfort, aesthetic appearance, and aerodynamic characteristics.
Was this review help?
3
5
Share
DominicFitz
08/14/25 9:22am
If I forget to close the car window and it gets rained on, I might panic at first, but I need to stay calm. Quickly grab a dry towel or sponge to wipe down the seats, floor, and window frames, making sure water doesn’t seep into the gaps. Then, turn on the air conditioning at maximum fan speed, set to hot air mode, and let it run for half an hour to help evaporate any remaining moisture. If the rain was heavy and soaked the carpet, I’ll need to lay down some newspapers for a few days to absorb the dampness. Don’t forget to check the door switches and audio buttons—rainwater might cause a short circuit, so it’s best to visit a professional auto repair shop for an electrical test. From now on, I always double-check the windows before parking to avoid repeated trouble. This little mishap taught me to be more careful—otherwise, rust or mold could lead to costly repairs.
Was this review help?
20
0
Share
Expand All
LaKarter
10/14/25 2:14am
After the car window was left open and got rained on, I know from experience to act immediately. First, use a vacuum cleaner to remove water from the affected areas, especially under the carpets where hidden water can lead to rust over time. Place a dehumidifier bag or use a hairdryer to dry the interior, as excessive moisture can damage electronic components like door locks or the AC panel. Prevention is key—consider installing an alarm or making it a habit to close windows remotely. Prolonged dampness can easily cause mold growth, so regularly check if the cabin vents are blocked. I would recommend friends to install a smart window control system for convenience and peace of mind.
Was this review help?
3
5
Share
Expand All
More Forum Discussions

What is the curb weight of the Jetour X90?

The curb weight of the Jetour X90 is 1595 kg. Taking the 2020 Jetour X90 Manual Yingyue Edition as an example, its body dimensions are: length 4840 mm, width 1925 mm, height 1780 mm, with a wheelbase of 2850 mm. The fuel tank capacity is 55 liters, and the body structure is a 5-door, 5-seat SUV. The 2020 Jetour X90 Manual Yingyue Edition is equipped with a 1.5T 156 horsepower L4 engine, with the engine model E4T15C. It has a maximum power of 115 kW and a maximum torque of 230 Nm, paired with a 6-speed manual transmission.
10
3
Share

What is the function of aluminum suspension?

The functions of aluminum suspension are: 1. Reduce unsprung mass and improve the response speed of shock absorbers; 2. Enhance wheel grounding performance and increase wheel grip; 3. Transmit forces and torque between wheels and frame; 4. Cushion the impact force transmitted from uneven road surfaces to the frame or body. Automotive suspensions are divided into dependent suspension and independent suspension. The structural feature of dependent suspension is that both wheels are connected by an integral axle, and the wheels together with the axle are connected to the frame through elastic suspension. When one wheel jumps due to uneven road surface, it causes the other wheel to swing in the transverse plane of the vehicle. The structural feature of independent suspension is that the axle is made split, and each wheel can be individually connected to the frame through elastic suspension, allowing both wheels to jump independently without affecting each other.
13
3
Share

Has the Acura RDX been domestically produced?

The Acura RDX has been domestically produced, and it is a mid-size SUV under GAC Acura. Taking the Acura RDX 2020 2.0T Enjoyment Edition as an example, its body dimensions are: length 4752 mm, width 1926 mm, height 1668 mm, wheelbase 2750 mm, fuel tank capacity 65 liters, luggage compartment capacity 660 liters, and the body structure is a 5-door 5-seat SUV. The Acura RDX 2020 2.0T Enjoyment Edition is equipped with a 2.0T 265 horsepower L4 engine, with a maximum torque of 380 Nm and a maximum power of 195 kW, paired with a 10-speed automatic transmission.
20
2
Share

What is the function of the spring on the Hyundai Elantra's brake disc?

The function of the spring on the Hyundai Elantra's brake disc is to maintain the correct position of the brake pads within the caliper. The Hyundai Elantra is a compact car produced by Beijing Hyundai, with body dimensions of: length 4610 mm, width 1800 mm, height 1450 mm, a wheelbase of 2700 mm, a fuel tank capacity of 53 liters, a curb weight of 1238 kg, and a body structure of a 4-door, 5-seater sedan. The Hyundai Elantra is equipped with a 1.5L 115-horsepower L4 naturally aspirated engine and a 1.4T 130-horsepower L4 turbocharged engine, and uses a MacPherson strut front suspension and a torsion beam rear suspension.
18
5
Share

How often should the coolant be replaced in a Haima M6?

Haima M6 coolant should be replaced approximately every three years. The full name of coolant is antifreeze coolant, meaning it is a cooling liquid with antifreeze properties. The Haima M6 is a mid-size car produced by Zhengzhou Haima Automobile, with body dimensions of 4700 mm in length, 1802 mm in width, and 1478 mm in height, and a wheelbase of 2730 mm. It features a 4-door, 5-seat sedan body structure and a curb weight of 1330 kg. The Haima M6 is equipped with a 1.6L 118 horsepower L4 naturally aspirated engine and a 1.5T 163 horsepower L4 turbocharged engine. The suspension system consists of a MacPherson strut independent front suspension and a multi-link independent rear suspension.
20
3
Share

What are the hazards of engine knocking?

Engine knocking can cause the following hazards: 1. Decrease in engine power and increase in temperature; 2. Increased load on internal engine components leading to wear; 3. Increased formation of carbon deposits inside the engine; 4. Deformation of internal engine components due to elevated temperatures. An engine is a machine that converts other forms of energy into mechanical energy, applicable to power generation devices, and also refers to the entire machine including the power unit. Types of engines include: internal combustion engines, external combustion engines, and electric motors. Engines are categorized by working principle into piston engines, ramjet engines, rocket engines, and turbine engines.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.