What to Do When the Car Trunk Won't Open?

How to align reference points for Subject 2 driving test?

For aligning reference points in Subject 2, you can observe the engine hood, lower edge of rearview mirrors, student's shoulder, parking control line, and rear wheels. Engine hood: The reference points on the hood help students judge the distance between the vehicle body and roadside line. During slope parking, you need to fully utilize the 1/3 position of the hood. When the sideline aligns with the left or right 1/3 of the hood, both sides of the vehicle will be exactly 30cm from the sideline. Lower edge of rearview mirrors: The lower edge of rearview mirrors is generally used to locate parking positions, commonly seen in reverse parking. When reversing into the parking space, observe when the lower edge of the mirror aligns with the yellow line in front of the parking space to determine the parking timing. Student's shoulder: After proper seat adjustment, the student's shoulder becomes a good reference point. During right-angle turns, for a left turn, when the student's left shoulder aligns with the corner point, quickly turn the steering wheel fully left to complete the turn. Parking control line: For reverse parking, parallel parking, and slope parking, students must stop the test vehicle exactly on the parking line as required. Taking slope parking as an example, when the wiper aligns with the parking pole, the front of the vehicle should be exactly within the parking control line. Rear wheels: During reverse parking, observe both rear wheels to determine if the parking position is appropriate. For right-side parking, when the distance between the right rear wheel and parking corner appears to be 30cm in the right mirror, the parking position is correct. If the distance is too close or too far, there's risk of crossing the line, requiring immediate correction.

12

3

Share

What brand is yatone tire?

yatone tire, also known as Yatu tire, is a tire brand under Continental AG of Germany, belonging to a niche brand. Here is an introduction to yatone tires: 1. Comfort: Yatu tires offer excellent comfort with low noise levels, reducing vibrations and impacts when the vehicle passes over obstacles. 2. Stability: Yatu tires feature outstanding wear resistance and handling performance, with symmetrical tread patterns that provide excellent stability. 3. Drainage: Yatu tires perform well in rainy and snowy conditions, offering good drainage to ensure strong driving force and grip.

8

4

Share

Which Cars Come with Exhaust Valves?

The MG6 comes with an exhaust valve. This model is equipped with more substantial factory sports equipment, specifically a variable valve exhaust system from Faurecia. The MG6 is a compact car with body dimensions of 4695mm in length, 1848mm in width, and 1462mm in height, with a wheelbase of 2715mm. In terms of power, the MG6 uses a 1.5-liter turbocharged engine with a maximum torque of 250 Nm and a maximum power of 124 kW. The engine reaches its maximum power at 5500 rpm and its maximum torque between 1700 and 4300 rpm.

6

4

Share

Is the Honda XR-V from Dongfeng Honda or Guangzhou Honda?

Honda XR-V is from Dongfeng Honda. Taking the 2021 Honda XR-V as an example, it belongs to the compact SUV category, with body dimensions of: length 4320mm, width 1772mm, height 1610mm, wheelbase 2610mm, front track 1535mm, rear track 1540mm, fuel tank capacity 50L, and curb weight 1225kg. The 2021 Honda XR-V is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 131PS, maximum power of 96kW, maximum torque of 155Nm, paired with a 6-speed manual transmission.

15

2

Share

How to Remove the Rubber Blade of a Car Wiper?

To remove the rubber blade of a car wiper, follow these steps: 1. Turn the car key to the power-on position, activate the wiper lever once to make the wiper stay in the upright position; 2. Press the small square button on the wiper arm and pull out the old rubber blade to remove it. The car wiper, also known as a windscreen wiper, is a device used to wipe away raindrops and dust attached to the vehicle's windshield. Its function is to improve the driver's visibility and enhance driving safety. It consists of a motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly.

8

0

Share

Why is coasting in neutral not recommended?

Hazards of coasting in neutral: 1. Coasting in neutral can generate excessive heat in the transmission, potentially causing damage. Whether it's a manual or automatic transmission, when coasting in neutral, the gears inside the transmission rotate at high speeds, instantly producing significant heat. Additionally, lubrication may become inadequate during neutral coasting, making this practice harmful to the transmission. 2. When coasting downhill in neutral, you lose engine braking and must rely solely on the brake system for deceleration. This can lead to brake system overheating and failure, creating a highly dangerous situation.

1

5

Share

What to Do When the Car Trunk Won't Open?

How to align reference points for Subject 2 driving test?

What brand is yatone tire?

Which Cars Come with Exhaust Valves?

Is the Honda XR-V from Dongfeng Honda or Guangzhou Honda?

How to Remove the Rubber Blade of a Car Wiper?

Why is coasting in neutral not recommended?

What are the techniques for making a U-turn in a narrow road with a B2 license?

What does the CL prefix in Mercedes-Benz represent?

Do I need to pay all the fees before taking the Subject 4 test?

Can Synthetic Engine Oil Still Be Used After 13,000 Kilometers?