What to Do When the Car Temperature Gauge Rises Slowly in Winter?

1 Answers
MacJuliet
07/29/25 5:49pm
Winter car temperature gauge rises slowly causes and solutions are mainly: 1. Cause: Lack of thermostat control, the cooling system will always be in a large circulation state. 2. Solution: When starting the engine, rely on the thermostat to achieve a small circulation state of the coolant, which can help the engine water temperature reach the optimal working temperature as soon as possible. When the water temperature tends to the optimal working temperature, the thermostat opens, and then the coolant carries out a large circulation, using the radiator at the front of the car to maintain the best temperature state. Here are some other introductions: The car temperature gauge is marked with the two English letters C and H, or distinguished by white and red areas, which respectively mean: 1. "C" is the first letter of the English word "cool", meaning cold. 2. "H" is the first letter of the English word "hot", meaning hot.
Was this review help?
16
1
Share
More Forum Discussions

Why Can't the Car's Power Window Close?

Car's power window cannot close due to: 1. Damage to the window regulator switch; 2. Motor overheating protection; 3. Blocked guide rails or aging rubber seals. Solutions for a car's power window that won't close: 1. Wait for the motor to cool down; 2. Clean the guide rails and apply some lubricant; 3. Replace the new sealing strip; 4. Replace the window regulator switch. The working principle of a car's power window is: relying on an electric motor to drive the crank handle to rotate the gear and lift the window. The power window device consists of a lift control switch, motor, regulator, and relay. The motor uses a bidirectional permanent magnet motor, controlling the current direction to make the motor rotate forward and reverse, achieving the window lift function.
20
0
Share

What does it mean when the vehicle body crosses the line during parallel parking?

When the vehicle body crosses the line during parallel parking, the main reason is turning the steering wheel fully to the left too late, causing the left rear wheel to already press over the parking space boundary line. As a result, when straightening the vehicle body, the right side of the vehicle will cross the parking space boundary line. Below is more information about parallel parking: 1. Introduction: Parallel parking is one of the test items in the second subject of the driving test. 2. Test purpose: To assess the driver's ability to correctly park the vehicle into the right-side parking space on the road. 3. Operation requirements: The driver must park the vehicle into the right-side parking space without the wheels touching the lane boundary lines or the parking space boundary lines.
14
4
Share

Can the large gap in the bumper be adjusted?

The issue of a large gap in the bumper is most likely due to the front hood being positioned too high. Simply adjust the lock on the hood to ensure a tighter fit. Here are some relevant details: 1. The car bumper is a safety device designed to absorb and mitigate external impacts, protecting the front and rear of the vehicle body. 2. A plastic bumper consists of three parts: the outer panel, cushioning material, and crossbeam. The outer panel and cushioning material are made of plastic, while the crossbeam is formed by stamping cold-rolled steel sheets about 1.5mm thick into a U-shaped channel. The outer panel and cushioning material are attached to the crossbeam, which is connected to the vehicle frame's longitudinal beams with screws, allowing for easy removal when necessary.
16
2
Share

What is the ground clearance of the Avalon?

The ground clearance of the Avalon is approximately 150 millimeters. The function of the chassis is to support and mount the car engine and its various component assemblies, forming the overall shape of the vehicle, receiving the power generated by the engine, and ensuring normal driving when the car is in motion. The Avalon is a mid-size car under Toyota. Taking the 2021 Toyota Avalon Luxury Edition as an example, its body dimensions are: length 4975 millimeters, width 1850 millimeters, height 1450 millimeters, with a wheelbase of 2870 millimeters. The 2021 Toyota Avalon Luxury Edition is equipped with a 2.5L naturally aspirated engine, with a maximum power of 154 kilowatts and a maximum power speed of 6600 revolutions per minute.
7
2
Share

What Are the Standard Gear and Speed Requirements for Subject 3?

There are 5 standard points for gear and speed in Subject 3. 1st Gear: Used for normal starting or climbing very steep slopes. The speed should be below 10 km/h when using this gear. Typically, manual transmission vehicles start in 1st gear. 2nd Gear: Used as a transitional gear for acceleration after starting, or for low-speed driving or climbing steep slopes. The speed should be between 10-20 km/h. 3rd Gear: Used at speeds of 20-40 km/h, commonly used for driving in urban areas. 4th Gear: Used at speeds of 40-60 km/h. 5th Gear: Used at speeds of 60 km/h and above.
16
1
Share

What is the difference between cold start and hot start of a car?

Car cold start and hot start are different as follows: 1. Cold start: It means starting the engine when the water temperature is low; cold start is more harmful to the car, and more than 80% of engine wear occurs during the cold start phase. During a cold start, the gaps between various parts inside the engine are relatively large, and it takes time to warm up and reach the specified gaps through thermal expansion, because if the gaps are too large, the oil film cannot cover and lubricate. During a cold start, the internal temperature of the engine is too low, making it difficult for the air-fuel mixture to vaporize and burn. 2. Hot start: It means starting the engine when the water temperature is high, the only difference being the temperature of the cooling water between the two.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.