What to Do When the Car Sunroof Won't Open?

2 Answers
Lance
07/24/25 3:11am
Solutions for a car sunroof that won't open include: 1. Check the sunroof switch; 2. Inspect if the sunroof frame is damaged; 3. Verify whether the sunroof motor is functioning. Reasons why a car sunroof may not open are: 1. Sunroof wiring fault; 2. Damage to the sunroof drive motor; 3. Severe lack of lubrication in the sunroof track; 4. Presence of foreign objects in the sunroof slot. The functions of a car sunroof are: 1. Effectively ventilate the car interior and increase fresh air intake; 2. Broaden the view and meet the shooting needs for mobile photography and videography. Maintenance methods for a car sunroof include: 1. Clean the sunroof drainage channel promptly and regularly wipe the sunroof guide rails with a damp sponge; 2. Apply silicone oil to the sunroof seal after washing the car to effectively prevent rubber aging and extend the service life of the sealing strip.
Was this review help?
1
0
Share
MacValeria
08/10/25 10:48pm
Yesterday, I also encountered the issue of the sunroof not opening. As someone who drives frequently, I think it's best not to rush into trying random fixes yourself. The most common causes might be a malfunctioning switch button—either it doesn't respond when pressed or feels sluggish—or debris blocking the tracks, as accumulated dust and dirt can jam the sliding mechanism. You should check if a fuse has blown; the fuse box is usually located under the dashboard on the lower left side or in the engine compartment. If a fuse is blown, replace it with a matching one. If you're unsure, you can try manually pushing the sunroof slightly, but avoid using excessive force to prevent scratching the glass or damaging the tracks. If the tracks lack lubrication, try applying some specialized lubricant. If none of these steps work, it's likely a motor failure or wiring issue, and I recommend visiting a 4S shop or professional repair center immediately—they can diagnose the problem clearly with specialized tools. As a general tip, I suggest cleaning the sunroof tracks and applying lubrication every six months to avoid such hassles.
Was this review help?
14
5
Share
Expand All
More Forum Discussions

What are the dimensions of the Mercedes-Benz E300?

The Mercedes-Benz E-Class has a length of 4947 mm, a width of 1860 mm, and a height of 1470 mm, with a wheelbase of 2939 mm. The imported version of the Mercedes-Benz E-Class has a standard wheelbase, while the domestically produced version has a longer wheelbase. The Mercedes-Benz E-Class is equipped with three engines: a 1.5-liter turbocharged engine, a low-power version of the 2.0-liter turbocharged engine, and a high-power version of the 2.0-liter turbocharged engine. 1.5-liter turbocharged engine: The Mercedes-Benz E-Class's 1.5-liter turbocharged engine delivers a maximum torque of 184 horsepower and 280 Nm. The maximum torque is achieved at 3000 to 4000 rpm, and the maximum power is reached at 6100 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. Low-power version of the 2.0-liter turbocharged engine: The low-power version of the 2.0-liter turbocharged engine produces a maximum torque of 258 horsepower and 370 Nm. The maximum torque is achieved at 1800 to 4000 rpm, and the maximum power is reached at 6100 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. High-power version of the 2.0-liter turbocharged engine: The high-power version of the 2.0-liter turbocharged engine delivers a maximum torque of 299 horsepower and 400 Nm. The maximum torque is achieved at 3000 to 4000 rpm, and the maximum power is reached at 6100 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. The Mercedes-Benz E-Class is equipped with a multi-link independent suspension at the front and a multi-link independent suspension at the rear.
14
4
Share

How to Wire a Car CD Player for Home Use?

First, prepare the original car CD player. Use a hacksaw to remove the side panel brackets and sand the edges with sandpaper: prepare all data cables, one with a speaker and one with a power supply. Purchase an audio terminal to connect the CD player and the speakers. Create a mounting frame and secure the power module with an assembly tool. Ensure everything is correct, assemble all components into the enclosure, then connect the speaker cables and power cables.
14
0
Share

What are the detailed introduction to the used car transaction flow chart and steps?

Check underneath the car for any oil spots or stains on the chassis. Copy the vehicle license, organization code certificate or ID card, etc.; materials related to evaluation and invoicing; copy materials required by the vehicle management office. Conduct a fair evaluation of the used vehicle and issue an evaluation report. When inspecting the exterior, pay attention to whether the glass is original and if there are any markings at the bottom of the glass. Complete the transaction procedures by issuing invoices based on the vehicle's valid documents and the evaluation report, among other materials.
18
5
Share

How to Apply for 18 Points on 12123?

You need to download the "12123" app on your mobile phone, which is an official application for handling traffic violations and driver's license matters. On the app's homepage, you can find information about your driver's license, such as the remaining points and the date for points reset. Among the various services on the homepage, select the "More" option to enter the "Business Center" page, which displays all available online services. The maximum points you can earn through "Learning to Reduce Points" is 6. Note that this does not directly add points to your original 12-point limit. Not all regions offer this service. Currently, only certain areas have opened this service, and it has not been promoted nationwide.
5
3
Share

What is the treatment method for sanding on cement pavement?

Direct spraying ensures that the base layer is fully saturated and absorbed. Continuously replenish the absorbed material to maintain a saturated state, ensuring the entire ground is thoroughly permeated. At least 48 hours after construction, apply Material #2 directly to the hardened ground surface in a single, even, and generous coat. No additional curing is required. If sanding is severe and the surface layer is peeling, the ground should first be coated with a treatment agent. Once dry, mix this treatment agent with cement and apply it evenly to the ground. Inadequate or untimely curing, exposure to intense sunlight, or strong winds can cause excessive water loss from the concrete surface, preventing sufficient hydration and resulting in lower strength.
4
2
Share

How to Open the Trunk of a Volkswagen?

Simply press or hold the unlock button in the middle of the car key for 3 seconds to open the trunk. Press the upper part of the Volkswagen logo with your thumb to make the lower part pop out, then press the lower part firmly to open the trunk lid. If you are outside the car, press the unlock button on the remote. Make sure the trunk is not separately locked; if it is, you must use the key to open it. The upper part of the Volkswagen logo at the rear of the car is the trunk release button.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.