What to Do When the Car Steering Wheel Locks and the Engine Won't Start?

1 Answers
StAbigail
07/29/25 9:29pm
When the vehicle's steering wheel is locked and the engine won't start, you can insert the key, press the brake pedal, then turn the steering wheel left and right while simultaneously turning the car key to complete the steering wheel unlocking procedure. Note that the key won't turn if you don't rotate the steering wheel during this process. The steering wheel lock is a simple anti-theft feature. Parking precautions: 1. Actively check if the vehicle is properly parked: After parking, you should actively observe whether the vehicle is properly positioned. If you forget the number of steering wheel turns, you can check the wheel rotation by looking outside; 2. Do not forcibly straighten the steering wheel: If you notice the tires aren't straight after turning off the engine, remember not to force the steering wheel back to center. You must restart the vehicle before straightening the steering wheel to avoid direct damage to the steering mechanism.
Was this review help?
5
0
Share
More Forum Discussions

What Causes Excessive Steering Wheel Play?

Excessive steering wheel play is caused by excessive clearance between components of the steering linkage system, such as the steering column, steering gear, tie rods, and ball joints. Wear of the Steering Column Universal Joint: The steering column universal joint is essentially a universal joint that changes the direction of the steering column's torque and prevents the steering column from impaling the driver in the event of a severe accident. Wear of the universal joint can lead to excessive steering wheel play and may sometimes produce a clicking sound. Wear of the Steering Gear Rack and Pinion: The steering gear rack and pinion will experience some wear, especially if there is a habit of not returning the steering wheel to the center position when parking. This places greater pressure on the rack and pinion, accelerating wear. When the rack wear is not particularly severe, the preload on the rack and pinion can be increased using the adjustment screw on the steering gear, but this will make the steering wheel feel heavier.
19
2
Share

Where is the SWM X7 engine produced?

The SWM X7 engine is produced domestically by Huachen Xinyuan. Taking the SWM X7 2021 facelift 1.5T automatic elite edition 6-seater as an example: this vehicle is equipped with a 1.5T inline four-cylinder engine, with a maximum power of 115 kW, a maximum power speed of 5500 to 5600 rpm, a maximum torque of 220 Nm, and a maximum torque speed of 2000 to 4000 rpm. It is paired with a 6-speed automatic manual transmission. This is a mid-sized 5-door 6-seater SUV, with dimensions of 4710mm in length, 1855mm in width, and 1750mm in height, a wheelbase of 2750mm, front-wheel drive, front suspension using MacPherson independent suspension, and rear suspension using torsion beam non-independent suspension.
15
1
Share

What are the differences between the Lexus ES300 and ES200?

Lexus ES200 and ES300 mainly differ in their powertrain systems. The ES200 is equipped with a 6AR-FSE 2.0L engine, while the ES300h still uses a hybrid system combining a 2.5L engine with an electric motor. Here is a detailed description of the differences between the Lexus ES200 and ES300: 1. The ES200 is equipped with a 6AR-FSE 2.0L engine, paired with a 6-speed automatic transmission, which remains unchanged from the previous model. The ES300h, on the other hand, continues to use the A25B-FKS 2.5L Atkinson-cycle engine combined with an electric motor in a hybrid system. In terms of the transmission system, the ES300 is still matched with an E-CVT electronic continuously variable transmission. 2. Additionally, there are minor visual differences. On the ES300 body, you can notice that the Lexus emblem has turned blue, and the HYBRID badge is added on the side, indicating the Lexus Hybrid Drive technology. The ES200's exterior, however, remains the same as the previous model. 3. The driving experience also differs significantly between the ES200 and ES300. The ES300 outperforms the ES200 in terms of power response, smoothness optimization, and fuel efficiency. 4. The ES200's measured 0-100 km/h acceleration time is 12.55 seconds, which is sufficient for daily driving. The ES300 achieves 8.3 seconds, a significant improvement over the ES200, making it the better choice for those seeking more power.
14
1
Share

How to Handle the In-Place Exhaust Self-Cleaning for Great Wall Pickup?

For the Great Wall pickup, turn on the ignition switch in place to power on, then press and hold the DPF regeneration switch behind the steering wheel until the dashboard prompts. Start the vehicle and let it idle, then restart the vehicle. The engine speed will automatically maintain at 2000 RPM until the dashboard indicates the self-cleaning is complete. Finally, turn off the vehicle. Below is an introduction to the Great Wall pickup: 1. Great Wall Pickup: The Great Wall pickup is a type of Great Wall Motors vehicle. The so-called "pickup" is a practical multi-purpose utility vehicle between a sedan and a truck, also functioning as a truck. The Great Wall pickup's design aligns with international standards, featuring a bold and imposing appearance. Driven by consumption and demand upgrades, pickups are now showcasing the characteristics of a "new five-modernization ecosystem," namely: passenger-oriented, intelligent, connected, customizable, and clean. 2. Appearance: Stylish, beautiful, and dignified. High-end pickups incorporate more fashionable elements in their design, adopting European and American sedan-style front faces with U-shaped grilles paired with louver-style air intakes, blending dynamism with stability while enhancing air intake efficiency for full combustion, fuel economy, and emission reduction. The dual-barrel crystal headlights, with their simple and sleek design, give the vehicle a more fashionable and elegant, dignified look. Comfort: Eco-friendly interior with ultra-low noise. The interior of the Great Wall pickup uses non-toxic and harmless eco-friendly materials, ensuring no unpleasant odors inside the cabin for a healthier environment. It is the only pickup in China that has passed the EU ELV environmental certification.
12
3
Share

What Causes a Squeaking Sound When Starting a Car?

The causes of abnormal noise when starting a car may include rusted brake discs, aging chassis, or foreign objects stuck in the wheels. Rusted Brake Discs: This abnormal noise could be coming from the braking system. In southern regions, where the climate is humid and rainy during spring and autumn, prolonged driving in such conditions can gradually cause the brake discs to rust. Foreign Objects Stuck in Wheels: Abnormal noise when starting the car. At this time, the noise may be caused by foreign objects stuck in the tread of the wheels, such as screws, stones, or other hard objects. Removing these foreign objects from the wheels can resolve the noise issue. Chassis Issues: This is one of the most common faults. Many cars develop aging suspension components after being used for a certain period. At this point, some supporting parts in the suspension gradually fail, causing the chassis to make abnormal noises when the car starts.
19
1
Share

What Causes Smoke from a Motorcycle Exhaust Pipe?

Motorcycle exhaust pipe smoke may be caused by excessively high engine oil level. Blue smoke from exhaust pipe: During engine operation, light blue smoke is often visible at the tail of the exhaust muffler, accompanied by excessive oil consumption. Possible causes of the fault include: excessively high engine oil level; cylinder compression pressure below the specified value; increased clearance between piston rings and cylinder walls. Black smoke from exhaust pipe: When the engine is running, black smoke comes out of the exhaust pipe with a pungent gasoline smell, more noticeable during acceleration. Possible causes include: overly rich air-fuel mixture; faulty spark plug operation; delayed ignition timing. White smoke from exhaust pipe: During engine operation, white smoke emerges from the exhaust pipe. Possible causes include: water content in the fuel; moisture in the cylinder or muffler.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.