What to Do When the Car Shows a Red Pot Dripping Water?

2 Answers
OCole
07/29/25 1:12pm
When the car displays a red oil pot dripping water, it indicates that the oil warning light is on. At this time, you should immediately stop the car and check the engine oil. There are many reasons that can cause the oil warning light to come on, including insufficient oil, poor oil quality, and excessively high engine temperature. Continuing to drive may cause damage to the vehicle, so when the oil pot light on the dashboard turns red, it is essential to stop promptly, call for assistance, and wait for rescue quietly. The specific reasons are as follows: Clogging of the oil filter; Insufficient oil quantity, leading to reduced oil pumping by the oil pump or inability to pump oil due to air intake, resulting in decreased oil pressure; Poor oil quality, selecting oil with low viscosity leading to poor sealing and gas leakage; Selecting oil with excessively high low-temperature viscosity causing pumping difficulties. If the oil fault light comes on, promptly go to a 4S shop for inspection and repair. Methods to handle when a red oil pot appears on the dashboard are as follows: Engine oil, also known as engine lubricant, serves functions such as lubrication and wear reduction, auxiliary cooling, sealing and leakage prevention, rust and corrosion prevention, and shock absorption. Using qualified lubricating oil can reduce wear on engine parts and extend their service life.
Was this review help?
10
1
Share
DerekMarie
08/14/25 3:04am
I've seen this red oil can light come on several times. That time on the highway, the dashboard suddenly flashed a red light with an oil can icon dripping, which really scared me! It means the oil pressure is too low, and the engine might be running out of oil. I immediately pulled over safely, turned off the engine, and checked the dipstick. Sure enough, the oil level was almost invisible. Luckily, I always keep half a bottle of oil in my car, so I poured it in right away. After seeing the light go off, I drove slowly to the repair shop. The mechanic said this is often caused by oil leaks or a faulty oil pump, and driving any longer could have completely ruined the engine. So remember to check your dipstick regularly—older cars leak more easily. Always stop in a safe place to check, and don't try to save money at the expense of your engine.
Was this review help?
5
2
Share
Expand All
More Forum Discussions

What brand is the engine of the Mazda6?

Mazda6 is equipped with a 2.0L naturally aspirated engine, with the engine model being LF. This engine has a maximum power of 108.0kW, a maximum horsepower of 147PS, and a maximum torque of 183.0Nm. Below is some extended information about the Mazda6: 1. Advantages: Stylish and trendy appearance; excellent engine performance with smooth acceleration; outstanding handling performance; quick acceleration with strong power; relatively comprehensive safety features. 2. Disadvantages: Limited model range, including sedan, hatchback, and sport versions. The craftsmanship is not very refined, and the materials used are of lower quality.
20
4
Share

What are the differences between the BYD Song Pro Elite and Luxury models?

The differences between the BYD Song Pro Elite and Luxury models lie in their configurations. The Luxury model adds front side airbags, tire pressure display, lane departure warning, road traffic sign recognition, active braking, front parking radar, 360-degree surround view, full-speed adaptive cruise system, and a 10.1-inch central control screen compared to the Elite model. Below are the similarities between the BYD Song Pro Elite and Luxury models: 1. Both use a 1.5-liter turbocharged engine with a maximum power of 118kw, a maximum torque of 245 Nm, a maximum torque speed range of 1600 to 4000 rpm, and a maximum power speed of 5200 rpm. They feature direct fuel injection technology and use aluminum alloy cylinder heads and blocks. 2. Both have a wheelbase of 2712 mm, with dimensions of 4650 mm in length, 1860 mm in width, and 1700 mm in height.
2
5
Share

Does Entering the Waiting Zone Count as Running a Red Light?

Entering the waiting zone does not count as running a red light. If you have already crossed the stop line and are continuing to make a left turn when the red light turns on, it is not considered running a red light. More details are as follows: 1. When the straight-ahead signal in the same direction turns green, vehicles in the left-turn lane must move forward into the waiting zone and wait for the signal. The 'left-turn waiting zone' is exclusively for left-turning vehicles. Even if the left-turn signal is red when the straight-ahead signal turns green, left-turning vehicles are allowed to enter the 'left-turn waiting zone' at the intersection and wait until the left-turn signal turns green before proceeding. 2. It is important to remind drivers that the left-turn waiting line is not a 'stop line.' If both the straight-ahead and left-turn signals are red, all vehicles must wait behind the original stop line. 3. If a vehicle has just crossed the stop line when the light turns red but stops immediately, this will not be penalized as running a red light. However, if there is noticeable movement after crossing the line, penalties will apply.
2
4
Share

Why is the clutch getting heavier?

There are several reasons why a car's clutch may become increasingly heavy: 1. When the clutch pedal is released, it should return quickly and accurately to its standby position. A return spring is typically designed at the pedal. If the heavy pedal phenomenon occurs after replacing the spring, it is likely that the clutch pedal return spring has too much tension. 2. Many car clutches use an assist system, which normally makes operation easier. However, if the clutch assist cylinder fails, it may result in insufficient assistance, ultimately causing the clutch pedal to feel very heavy when pressed. 3. Most of the power driving the clutch booster comes from the compressed air in the air reservoir. If the pressure of the compressed air leading to the booster is too low, it can cause insufficient assistance. Therefore, when such a fault occurs, the compressed air pressure to the clutch booster should be checked first.
15
1
Share

Where is the cabin air filter located on the Changan CX30?

The cabin air filter of the Changan CX30 is located beneath the wiper panel under the engine hood. You'll need to remove the wiper panel to access it. Since this involves wiper removal, it's recommended to have it replaced at a 4S dealership or auto repair shop. Manufacturers generally recommend replacement every 20,000-30,000 kilometers. Here are the functions of the cabin air filter: 1. Ensures tight sealing against the housing to prevent unfiltered air from entering the cabin. 2. Filters out solid impurities such as dust, pollen, and abrasive particles from the air. 3. Adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., with strong and lasting moisture absorption capability. 4. Prevents windshield fogging to maintain driver visibility and ensure driving safety; provides fresh air to the cabin, preventing occupants from inhaling harmful gases and effectively eliminating bacteria and odors. 5. Maintains clean cabin air to prevent bacterial growth and creates a healthy environment; effectively separates solid impurities like dust, core powder, and abrasive particles; efficiently blocks pollen to prevent allergic reactions that could affect driving safety.
2
4
Share

What is the battery model for the Dongfeng Nissan Sylphy remote control?

The battery model for the Dongfeng Nissan Sylphy remote control is a 3V CR2025 button cell. The remote key utilizes the wireless remote control function of the central locking system, allowing you to open and lock the doors from a distance without inserting the key into the lock. The remote key generally consists of the following two parts: 1. Transmitter. Composed of a transmission switch, transmission antenna (keypad), integrated circuit, etc. It contains an identification code storage circuit and an amplitude modulation circuit, with a button-type lithium battery installed on the opposite side of the circuit. The transmission frequency is selected according to the radio standards of the country of use, and the transmission switch sends a signal each time it is pressed. 2. Receiver. After the transmitter sends the identification code using shortwave modulation, it is received by the car's shortwave antenna and processed by the distributor into the shortwave high-frequency amplification processor of the receiver's electronic control unit for demodulation. The demodulated identification code is then compared; if it is the correct code, it is input into the control circuit to activate the actuator.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.