What to Do When the Car Roof Fabric Comes Off?

2 Answers
StValerie
07/29/25 3:12am
The solutions for a car roof fabric coming off are: 1. If the edge comes off due to aging of the velvet sponge, you can use special roof glue to apply along the edge, wait a few minutes for the glue to dry and harden, then it will bond; 2. You can choose to use clips for repair, selecting clips of a similar color and nailing them back; 3. You can also use a syringe to inject glue, draw glue into the syringe, inject it into the collapsed area, then press with your hand or an object, and the glue will harden and bond in a few minutes; 4. If the roof fabric comes off in a large area, it can only be removed and replaced. Remove the entire roof fabric and clean the top, prepare a new piece of roof fabric and special roof glue, spray glue on the car roof and the inner side of the roof fabric, let it dry for 3 to 5 minutes, then bond it.
Was this review help?
19
3
Share
VonIsabel
08/12/25 7:04am
I've personally experienced the issue of a car's headliner fabric coming loose. At first, it was just a small section that had loosened, and I didn't think much of it. But later, the entire thing fell down, obstructing my view while driving, which gave me quite a scare. I tried fixing it myself: I bought special headliner adhesive from an auto parts store, cleaned off the old glue and dust, and carefully reattached it using a scraper. I sprayed cleaner while pressing it firmly into place, and it took a lot of effort to get it to stick. The result was okay, but on hot days, the adhesive smell was strong, so I had to drive with the windows open for ventilation. Prevention is key—avoid parking in direct sunlight, and using sunshades can reduce glue softening. If it gets worse, I'll take it to a repair shop. The bottom line is not to delay—safety comes first.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

What is On-Demand Four-Wheel Drive?

On-Demand Four-Wheel Drive: A drivetrain system that only switches to four-wheel drive when appropriate, otherwise remaining in two-wheel drive. The system automatically shifts between two-wheel and four-wheel drive modes based on the vehicle's driving conditions without requiring manual intervention. Also known as Real-Time Four-Wheel Drive, this technology has been developed in recent years and uses a computer chip to control the switching between two-wheel and four-wheel drive. A notable feature of this system is that it inherits the advantages of both full-time four-wheel drive and part-time four-wheel drive while compensating for their shortcomings. It can autonomously identify driving conditions and control the switching between two-wheel and four-wheel drive modes based on changes in the driving environment. On low-traction surfaces such as bumpy, hilly, or winding roads, the vehicle automatically sets to four-wheel drive mode, while on flatter surfaces like urban roads, it switches back to two-wheel drive.
10
3
Share

Can the sidewall of a tire be repaired?

The sidewall generally cannot be repaired. Car tires are mostly radial tires, mainly composed of the cord ply, steel mesh, and rubber. The cord ply consists of transverse and longitudinal cords, whose main function is to bear the load, while the rubber's main function is to seal and allow flexible deformation. The sidewall is the weakest part. If a tire is forcibly repaired, the adhesive on the sidewall may peel off due to the constant alternating deformation and recovery during rotation. If a mushroom plug repair is used, it may cause the sidewall cords to break, leading to bulging. Causes of tire sidewall bulging: 1. Caused by hard object compression leading to sidewall cord breakage; 2. Driving over potholes at high speed—you should slow down when encountering potholes on the road, otherwise high-speed impact can easily break the tire cords; 3. Mounting curbs at a small angle, which causes the weight to be concentrated on half of the tire. Note: Once bulging occurs, the tire cannot be repaired and should be replaced promptly.
11
0
Share

Reasons for Cracks on the Sidewall of Tires

Reasons for cracks on the sidewall of tires: 1. Poor maintenance or driving on gravel roads and construction sites, leading to contact with hard objects that cause damage to the inner layers of the tire under heavy pressure; 2. Long-term use of the tire causing rubber aging, resulting in numerous fine cracks on the sidewall. Tires older than 4 years often exhibit this phenomenon. Methods to address cracks on the sidewall of tires: 1. Outer edge wear: If significant wear is observed on the outer edge of the tire in the direction of travel, it indicates that the tire is frequently underinflated. Inflate according to the "highway" standard, which is 30 kPa higher than the normal standard; 2. Convex and wavy wear: If the tire shows wavy wear around its circumference, it suggests severe wear of components such as shock absorbers, bearings, and ball joints. It is recommended to inspect the wear condition of the suspension system and replace worn parts before changing the tire.
14
2
Share

Is 156 Horsepower Enough?

Horsepower will never be enough, it depends on individual circumstances. Here is relevant information: 1. Horsepower: Horsepower is a commonly used unit of power measurement in engineering, proposed by James Watt. 1 horsepower is approximately equal to 735 watts. It generally refers to metric horsepower rather than imperial horsepower. 2. BMW: BMW (Bavarian Motor Works), the full Chinese name is Bayerische Motoren Werke AG, a German luxury car brand. BMW's model series include i, X, Z, and pure numeric models 1, 2, 3, 4, 5, 6, 7, 8, etc., as well as the M series (BMW's official high-performance modification division) based on improvements to these series. BMW was founded in 1916.
15
5
Share

What is the fuel tank capacity of a 2009 Jetta in liters?

Jetta's fuel tank capacity is 55L. Here is some relevant information: 1. Jetta: Jetta is an automobile brand produced by FAW-Volkswagen Automotive Co., Ltd., a joint venture of the German Volkswagen Group in China. The Jetta (Jetta-MK1) was launched in Europe in 1979. Structurally, the Jetta is essentially a Golf with a rear trunk, and it can be considered a derivative of the Golf. 2. Specific configurations: The Jetta has a maximum power of 81KW and a maximum torque of 150Nm. The engine incorporates advanced technologies such as a Freilauf generator, dual VVT timing adjustment system, cylinder head cover integrated with intake/exhaust camshafts, and a continuously adjustable oil pump. These technologies effectively reduce fuel consumption while further improving emissions and noise levels. Among these, CO2 emissions are reduced to 6.4g/km, and noise is reduced by 1.5dBA.
11
0
Share

What are the differences between the Tiggo 8 Kunpeng Edition and the Tiggo 8 PLUS?

The differences between the Tiggo 8 Kunpeng Edition and the Tiggo 8 PLUS are as follows: 1. Exterior design: The Tiggo 8 PLUS features multiple upward-slanting waistlines and curved surfaces on the doors, giving the side profile a more sporty and powerful appearance. The rear of the Tiggo 8 PLUS also conveys a solid and stable feel. Compared to the Tiggo 8, the Tiggo 8 PLUS's rear light clusters have abandoned the full-width design, adopting a more eye-catching shape while still using LED lighting, complete with sequential turn signals and a welcome breathing effect. 2. Interior design: The interior of the Tiggo 8 PLUS is exceptionally luxurious and spacious, embodying the design concept of a 'luxury land jet cabin,' delivering a striking visual impact. It is equipped with dual 12.3-inch connected screens, an 8-inch air-conditioning touch panel, and a flat-bottomed three-spoke multifunction steering wheel, significantly enhancing the technological feel of the cabin.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.