What to Do When the Car Radar Doesn't Beep?

1 Answers
SanLeonardo
07/30/25 1:03am
Car radar not beeping can be resolved by replacing the buzzer. The functions of car radar are: 1. The ultrasonic sensor emits and receives ultrasonic signals, then inputs these signals into the main unit, displaying them via the display device; 2. The controller processes the signals, calculating the distance and orientation between the vehicle body and obstacles. During reversing, the car radar utilizes the ultrasonic principle, with probes installed on the rear bumper sending out ultrasonic waves that reflect off obstacles. It then calculates the actual distance between the vehicle body and the obstacle, alerting the driver to make parking or reversing easier and safer.
Was this review help?
17
5
Share
More Forum Discussions

What Causes the Car Key to Fail to Be Detected?

If the car key suddenly fails to be detected, it may be due to the following reasons: 1. The control module inside the remote car key malfunctions, preventing detection; 2. The car's remote transmitter antenna has aged, causing the remote key to stop working; 3. Sudden cold weather may cause the grease inside the remote key to become sticky, leading to poor contact; 4. The battery in the remote car key is loose or dead. If the smart car key suddenly fails to be detected and the car door cannot be opened, you can follow these steps to open the door: First, locate the mechanical key that comes with the smart car key. Generally, smart car keys are equipped with two types of mechanical keys: one is a conventional mechanical key, which can usually be ejected by pressing a button on the key; the other is a hidden key, often located behind a safety switch on the back of the smart key, which can be accessed by sliding it open. Second, find the keyhole. The spare mechanical key usually only unlocks the driver's side door, so locate the keyhole on the door handle and open it directly. However, some car models hide the keyhole inside the door handle for aesthetic reasons. Typically, there is a small decorative panel on the right side of the handle. Insert the key to open the panel, revealing the keyhole. Third, insert the mechanical key into the keyhole to unlock the door.
3
4
Share

Where to Check China 5 and China 6 Emission Standards for Vehicles?

China 5 and China 6 emission standards can be checked on the vehicle acceptance sheet, which includes details such as model, color, emission standard, engine number, and chassis number. The China 5 emission standard is marked with a "V," and the China 6 emission standard is marked with a "Ⅵ," both using Roman numerals. Locations of the acceptance sheet: 1. There is usually a nameplate below the co-driver's door. 2. Relevant labels displaying the vehicle model can be found in places such as the lower left corner of the windshield, the driver's door pillar, the left side of the dashboard, and the engine compartment. For used cars, the vehicle model can be used to check on the environmental protection website. The method is as follows: 1. Identify the vehicle model, which is usually marked on the nameplate of the car. 2. Visit the Motor Vehicle Environmental Protection Website, enter the vehicle model and verification code in the input box on the webpage, and click "Query" to proceed.
18
5
Share

What is the purpose of the green laser on highways?

Highway green lasers are called "anti-fatigue laser lights," used to remind drivers to stay safe during nighttime driving. Currently, anti-fatigue laser lights have been installed on highways in multiple provinces including Shandong, Shanxi, Henan, Hebei, Shaanxi, and Jiangsu. Wuxi traffic police reported a 17% decrease in fatigue-related accidents on high-risk road sections where this system was installed. Summer is the peak season for fatigue driving. Hot weather and prolonged driving can easily lead to fatigue, especially on highways where the road environment is monotonous, traffic disruptions are minimal, and speeds are stable—all factors that can induce driver fatigue. Driving in such a state is extremely dangerous! According to incomplete statistics, fatigue-related accidents account for approximately 25% of all highway accidents and over 35% of major traffic accidents. "Anti-fatigue laser lights" are just one technological "reminder" measure to prevent accidents. Avoiding fatigue driving ultimately starts with the driver: ensure sufficient sleep, avoid driving during afternoon and nighttime hours when possible, plan driving schedules scientifically, take breaks every 4 hours of continuous driving (with rest periods lasting at least 20 minutes), limit nighttime driving to no more than 2 hours at a stretch (ideally with two drivers alternating shifts), arrange rest periods appropriately, and avoid maintaining a fixed posture for too long while driving. If drowsiness occurs while driving, pull over at a service area or the nearest exit to rest.
9
4
Share

What to Do When Both Inside and Outside Door Locks of Haval H6 Won't Open?

There are many reasons why the Haval H6's door locks won't open from either inside or outside, primarily including the car being in a locked state, car key malfunction, car battery being dead, door sticking to the sealing rubber strip, or door lock deformation. Below are the corresponding solutions for each fault: 1. Car in a locked state: If the car is locked, not only the driver's door won't open, but all four doors and the trunk generally cannot be opened either. This situation is quite simple to handle; just unlock the car. 2. Car key malfunction: A faulty car key can prevent the door from unlocking. Key malfunctions include various situations, such as the car key being out of battery, buttons on the key being broken or unresponsive, or the key not being re-decoded after battery replacement. Specific situations require specific analysis. 3. Car battery dead: If the car battery is dead while the car is locked, the remote key won't open the door. In this case, charge the battery and use the mechanical key to open the door. 4. Door sticking to the sealing rubber strip: When the door sticks to the sealing rubber strip, applying more force when opening should do the trick. 5. Door lock deformation: If the car's door lock is deformed or damaged due to impact, it's necessary to visit a repair shop for professional repair or replacement.
5
1
Share

Can the car interior be decorated before license plate registration?

The interior cannot be decorated before license plate registration. The exterior appearance of the vehicle must match the photo, and the photo must be consistent with the content of the vehicle certification. The documents required for new car registration include: ID card, vehicle certification, triplicate car purchase invoice issued by the 4S store, the original and duplicate tax certificates obtained after paying the vehicle purchase tax, insurance policy, compulsory traffic insurance policy, and a temporary residence permit if the household registration is not local. Relevant information about license plates is as follows: 1. Notes for new car registration: You need to go to the vehicle management office to complete the registration, submit all required documents and pay the fees. The vehicle must also be driven to the vehicle management office for inspection. Some exempt vehicles only require an external inspection, which generally involves checking the engine number and chassis number. After the inspection, you can go to the vehicle management office hall to select a license plate. 2. The role of license plates: License plates are used for numbering and information registration of vehicles. Their main purpose is to identify the region to which the vehicle belongs, and the owner and registration information of the vehicle can also be traced based on the license plate.
3
4
Share

Why Does Car Fuel Consumption Increase in Summer?

The reasons for higher fuel consumption in summer are as follows: 1. Severe engine carbon deposits: Carbon deposits usually form on the fuel injector, spark plug, throttle valve, and combustion chamber. When carbon deposits reach a certain level, issues such as difficulty starting, stalling during neutral coasting or gear shifting, weak acceleration, and unstable idle speed (fluctuating high and low) may occur. 2. Use of inferior fuel: Inferior fuel contains more impurities and cannot be fully burned, so most of the gasoline is expelled from the vehicle. At the same time, a layer of white or reddish-brown substance forms on the surface of the oxygen sensor, leading to misjudgment of exhaust oxygen content measurement and transmission of incorrect data, ultimately resulting in poor control of the fuel injection ratio. 3. Excessive vehicle load: Some owners tend to place unnecessary items in the vehicle, which increases the weight. Others prefer to fill the fuel tank completely, which also adds to the vehicle's weight. The greater the vehicle load, the higher the pressure of the tires on the ground, and the greater the tire friction. 4. Use of high-power electrical devices in the vehicle: Especially at idle speed, since the engine speed is low, the electricity generated by the alternator is insufficient. When high-power electrical devices (such as air conditioning cooling or high-power audio systems) are used in the vehicle, they increase the burden on the engine and battery. Operating the vehicle under high load conditions also leads to increased fuel consumption.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.