What to Do When the Car Paint is Scratched White?

2 Answers
DiColton
07/29/25 3:01am
You need to purchase a touch-up paint pen set online with the same color code, which will include all the necessary touch-up tools. The process can be completed in about two hours. First, clean the painted surface by wiping it back and forth with a soft towel dipped in toothpaste, then wipe it off with a clean towel.
Was this review help?
9
5
Share
SamuelRose
08/12/25 6:54am
A few days ago, while reversing my car, I accidentally scraped against a pillar, leaving a large white scratch on the paint. It scared me so much I nearly jumped out of my seat. I quickly went online to find solutions and discovered a few methods to try: For small scratches or slight paint exposure, you can DIY by purchasing a touch-up pen or repair paste. The process is simple—first clean the scratched area, dry it, apply the product evenly, and polish it once it's dry. For deeper scratches that may have damaged the primer, it's essential to visit a professional shop to prevent rust and corrosion. Since I couldn't handle it myself, I went to a repair shop where the technician used a paint repair spray, costing around 200-300 RMB—quite affordable. The key is not to delay; daily driving and exposure to rain can accelerate the damage. Always park carefully and keep a safe distance from obstacles.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

What to Do When the Traction Control Off Indicator Light Is On?

The reason the traction control off indicator light is on indicates the working status of the vehicle's TCS (Traction Control System). When this light is illuminated, it means the TCS system has been deactivated. The main reasons for the traction control light on the car dashboard being on are: 1. Fuel system malfunctions causing reduced fuel injection, such as clogged injectors, low fuel pressure, or impurities in the gasoline. Inaccurate air measurement, leading to a discrepancy between the detected air intake and the actual air intake. 2. If the detected air intake is lower than the actual air intake, the PCM-calculated fuel injection will be less than the actual demand, causing the oxygen sensor feedback signal to indicate a lean condition. The PCM then increases the fuel injection, leading to a higher positive fuel trim value. Inaccurate closed-loop feedback signals, such as a faulty oxygen sensor.
14
2
Share

How Many Times Can 2 Liters of Windshield Washer Fluid Be Used?

2 liters of windshield washer fluid is typically the amount in one bottle. The number of times it can be used mainly depends on the frequency of the car owner's usage and is also related to the driving environment of the vehicle. In areas with poor environments, car owners tend to use more windshield washer fluid. Below is some information about windshield washer fluid: The surfactants in windshield washer fluid usually have functions such as wetting, penetrating, and solubilizing, thereby achieving the effect of cleaning and removing dirt. Due to the presence of alcohol and ethylene glycol, the freezing point of the liquid can be significantly lowered, providing antifreeze effects and quickly dissolving frost. Additional information: 1. After using windshield washer fluid, a single-molecule protective layer forms on the glass surface. This protective film can prevent the formation of fog droplets, ensuring the windshield remains clear and transparent for better visibility. 2. After cleaning, the substances adsorbed on the glass surface can eliminate the charge on the glass surface, providing anti-static properties. The ethylene glycol in the windshield washer fluid has a high viscosity, which can lubricate and reduce friction between the wiper and the glass, preventing scratches.
18
2
Share

Does a child count as overloading when riding in a car?

Whether a child counts as overloading when riding in a car depends on different situations: 1. It is considered overloading if the number of passengers exceeds the vehicle's specified limit; 2. It is not considered overloading if the number of passengers does not exceed the vehicle's specified limit. Vehicle overloading refers to the situation where the weight of the cargo or the number of passengers exceeds the approved capacity specified in the vehicle's registration, regardless of whether it involves children. The impacts of overloading include: 1. The load far exceeds the designed bearing capacity of roads and bridges, severely damaging road infrastructure; 2. Increased load leads to greater inertia, resulting in longer braking distances and higher risks; 3. It adds psychological burden and stress to the driver, increasing the likelihood of operational errors and affecting driving safety; 4. Overloaded vehicles cannot travel at normal speeds, occupying lanes for extended periods and directly affecting traffic flow.
4
1
Share

What to Do If the Compulsory Traffic Insurance Policy Is Lost?

If the compulsory traffic insurance policy is lost, the vehicle owner should immediately apply for a replacement. According to the relevant regulations of the insurance company, generally, the replacement requires the original ID card and vehicle license of the owner. The owner can also authorize someone else to handle the replacement, but in this case, a power of attorney and relevant authorization documents must be provided, along with the aforementioned certificates. More details are as follows: 1. The compulsory traffic insurance policy serves as proof that the vehicle is insured. After purchasing compulsory traffic insurance, the insurance company will issue the policy, which proves that the owner has purchased the insurance. 2. The compulsory traffic insurance policy is mainly used for vehicle annual inspections or as proof for claims. In the event of an accident, the owner needs to provide the compulsory traffic insurance policy and identity proof to proceed with the claim smoothly.
12
2
Share

How Often Should You Start Your Vehicle in Winter?

In winter, it's recommended to start your vehicle every two weeks. When a car remains unused for extended periods, most of the lubricating oil adhering to components that require lubrication will flow back to the oil pan due to gravity, reducing lubrication in moving parts. Precautions for long-term vehicle parking: If the vehicle will be parked for an extended period, ensure to thoroughly clean and organize the entire vehicle before parking. Remove any mud stains, apply wax to the body for protection against corrosion. Place desiccants inside the cabin to absorb excess moisture. Clean out all items from the interior promptly and avoid leaving snacks inside. Risks of long-term vehicle parking: Oil seals may deform and age, the battery lifespan may shorten due to self-discharge, tires are prone to deformation from prolonged stationary position, brake discs may rust, and electronic components are susceptible to moisture damage leading to malfunctions.
6
4
Share

Where does the license plate Ji T belong to?

Ji T is the license plate code for Hengshui City, Hebei Province. Below is an introduction to the license plate codes of other regions in Hebei Province: 1. Ji A: Shijiazhuang. 2. Ji B: Tangshan. 3. Ji C: Qinhuangdao. 4. Ji D: Handan. 5. Ji E: Xingtai. 6. Ji F: Baoding. 7. Ji G: Zhangjiakou. 8. Ji H: Chengde. 9. Ji J: Cangzhou. 10. Ji O: Provincial government agencies. 11. Ji R: Langfang. Additional information: 1. The first character of a license plate is a Chinese character: representing the abbreviation of the province where the vehicle is registered. 2. The second character of a license plate is an English letter: representing the code for the prefecture-level city where the vehicle is located. The general rule is: A is the provincial capital, B is the second-largest city in the province, C is the third-largest city, and so on.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.