What to Do When the Car Often Parks Under Trees and Gets Covered with Resin?

2 Answers
SanRylee
09/04/25 4:05am
If your car is parked under trees and gets covered with resin, you can try the following methods to deal with it: 1. Use toothpaste to clean: Sprinkle water on the car body and simply wipe it with a wet cloth. Squeeze toothpaste evenly onto the cloth, spread it out, and make sure the cloth is soaked. You can then clean a large area and rinse it with clean water. This method not only removes resin from the car but also effectively eliminates scratches. Apply it to scratched areas, wait a few minutes, and then wipe it off for excellent results. 2. Use insect and tar remover: There are some commercial insect and tar removers available that can help car owners easily remove dirt from the car's paint. These cleaners are usually mild and do not harm the paint. Simply spray it on during car washing and wipe with a sponge to remove the dirt effortlessly. 3. Use essential balm: Essential balm, floral water, and other alcohol-based organic solvents can effectively dissolve sticky organic substances. They can effectively remove minor insect residues on the paint. After cleaning, rinse the paint surface promptly. 4. Use nail polish remover: Nail polish remover is quite common. Pour some on, wait for it to soak in, and then easily wipe off the dirt with a cloth. 5. Visit a 4S shop: Car washes often use polishing and buffing treatments.
Was this review help?
17
5
Share
GeorgeLee
09/16/25 5:13am
As someone who frequently parks under trees, I've summarized a few key points. Tree sap sticking to the car paint is common, especially when parking near pine trees. If left untreated for too long, the sap can harden and even corrode the paint. My first suggestion is to try avoiding parking under trees for extended periods and look for more open parking spaces. If you have no choice but to park there, invest in a high-quality car cover to effectively protect against sap and bird droppings. When cleaning, avoid scrubbing forcefully right away—start by softening the sap with warm water, then gently wipe with a soft cloth and some dish soap. If that doesn't work well, try a specialized automotive sap remover available at supermarkets or online stores—apply it, wait a few minutes, and rinse off. If you're really struggling, take the car to a professional car wash early; they can use a polishing machine to handle it without risking paint damage. Remember to maintain regular car washes and don't let sap accumulate too much, as that could lead to costly repairs later. In short, prevention is key, and quick action is essential.
Was this review help?
6
5
Share
Expand All
More Forum Discussions

What is the Volkswagen model that starts with 'ph'?

The Volkswagen model that starts with 'ph' is the Phideon. Taking the 2021 Volkswagen Phideon as an example, it belongs to the full-size sedan category. Its body dimensions are: length 5074mm, width 1893mm, height 1489mm, with a wheelbase of 3009mm, a fuel tank capacity of 75 liters, and a trunk capacity of 440 liters. The 2021 Volkswagen Phideon is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 224PS, maximum power of 165kW, and maximum torque of 350Nm, with the maximum torque available from 1650rpm to 4500rpm. It is paired with a 7-speed wet dual-clutch automatic transmission.
9
3
Share

How to Set the Lock Beep for the Lynk & Co 03?

The method to set the lock beep for the Lynk & Co 03 is: 1. Find the settings on the central control screen; 2. Click on settings, where the basic vehicle settings will appear, then scroll down to find the lock feedback option to set the lock beep function. Taking the 2021 Lynk & Co 03 Manual Pure Lite version as an example, it belongs to the compact car category with body dimensions of: length 4639mm, width 1840mm, height 1472mm, and a wheelbase of 2730mm. The 2021 Lynk & Co 03 Manual Pure Lite version is equipped with a 1.5T turbocharged engine, delivering a maximum power of 115kW at 5000rpm, and a maximum torque of 245Nm within the range of 1450 to 4000rpm, paired with a 6-speed manual transmission.
4
4
Share

Which turn signal to use when reversing?

No turn signal is required when reversing. The turn signal operates as follows: up for right and down for left. Its usage method is: 1. Push the turn signal lever upward to activate the right turn signal; 2. Pull the turn signal lever downward to activate the left turn signal. The functions of turn signals are: 1. To indicate the turning direction to pedestrians or other vehicles; 2. To show the direction for overtaking or lane changing; 3. When both left and right turn signals flash simultaneously, it indicates an emergency situation to alert other vehicles. Precautions for using turn signals include: 1. Activate the turn signal in advance when making a turn; 2. Use the left turn signal when overtaking and the right turn signal when returning to the original lane; 3. When activating the turn signal, observe pedestrians and oncoming vehicles before performing the maneuver.
12
5
Share

What letters are used in Yan'an license plates?

Yan'an license plates use the prefix Shaan J. The license plate prefixes for various cities in Shaanxi Province are as follows: Shaan A for Xi'an, Shaan B for Tongchuan, Shaan C for Baoji, Shaan D for Xianyang, Shaan E for Weinan, Shaan F for Hanzhong, Shaan G for Ankang, Shaan H for Shangluo, Shaan J for Yan'an, Shaan K for Yulin, and Shaan V for Yangling Agricultural Demonstration Zone. A license plate number consists of Chinese characters, English letters, and a five-digit serial number. Its functions include: 1. Numbering and information registration for vehicles; 2. Identifying the region to which a vehicle belongs; 3. Tracing the owner and registration details of a vehicle based on the license plate. Types of license plates: 1. White represents military and police plates; 2. Blue represents ordinary small vehicles with fewer than 7 seats; 3. Yellow represents ordinary large vehicles; 4. Black represents foreign enterprise plates.
16
5
Share

How to Close the Volkswagen Sunroof?

To close the Volkswagen sunroof, follow these steps: 1. Sit in the car and power it on; 2. Locate the sunroof control button; 3. Rotate the sunroof control button to change its position. Functions of the sunroof: 1. Changes the traditional ventilation method; 2. Prevents exhaust fumes from entering the car; 3. Reduces wind noise; 4. Quickly lowers the interior temperature; 5. Rapidly removes fog from the interior; 6. Expands the field of vision. Volkswagen models include: Magotan, Sagitar, Golf, Tiguan L, Tayron, and Phideon. Taking the 2021 Golf as an example, it is a compact car with the following dimensions: length 4296mm, width 1788mm, height 1471mm, wheelbase 2636mm, fuel tank capacity 51L, and trunk capacity 380L. The 2021 Golf is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 116PS, maximum power of 85kW, maximum torque of 200Nm, and is paired with a 7-speed dual-clutch transmission.
15
5
Share

How to Turn Off the High Beam on a Mercedes-Benz?

To turn off the high beam on a Mercedes-Benz, start the vehicle and locate the light adjustment button on the lower left side of the steering wheel. Adjust the light button to 'auto' to deactivate the high beam. Below are the specific methods for operating the lights on a Mercedes-Benz: 1. Turn signals and parking lights. With the ignition switch on, rotate the control lever to the corresponding position for turn signals or parking lights to activate the respective lights. 2. High beam. Push the light control lever forward to turn on the high beam. 3. Fog lights. The switch is located on the left side of the dashboard. Rotate the switch to the appropriate position to activate the fog lights. 4. Automatic headlights, low beam, and position lights. When the AUTO indicator light is illuminated, it means the automatic headlights are active. Rotate the knob to switch between automatic headlights, low beam, and position lights. 5. Headlight washer (available on certain models). With the headlights on, activate the windshield washer switch to clean the headlights. If you only want to clean the windshield, turn off the headlights before activating the windshield washer switch.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.