What to Do When the Car Navigation Display Touchscreen Malfunctions?

How to reset the tire pressure light on Dongfeng Fengshen Yixuan?

Dongfeng Fengshen Yixuan tire pressure light reset method: First, turn on the ignition switch, press and hold the tire pressure monitoring reset button until you hear a "ding" sound, then release it. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally the dashboard warning light will turn off, completing the tire pressure reset. Abnormal tire pressure is generally caused by the following 3 reasons: Abnormal tire pressure: Usually, an alarm will sound if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator light to turn on. Simply perform a tire pressure reset to resolve this. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation valve. If the tire pressure sensor is damaged due to impact while driving, it will also cause the tire pressure warning light to turn on. For sensor damage issues, only replacement with a new part is possible.

2

3

Share

How to adjust the rearview mirror of Trumpchi GS4?

Trumpchi GS4 rearview mirror adjustment method: On the left door of the Trumpchi GS4 or below the steering wheel near the left door. After finding the position, move the gear switch to the left to adjust the left rearview mirror, and similarly to the right for the right rearview mirror. The following is a related introduction to the adjustment method of the Trumpchi GS4 rearview mirror: 1. Adjust the central rearview mirror: Place the horizon in the middle and the ear on the left. Position the distant horizon at the midline of the central rearview mirror, then move it left or right so that the image of your right ear is just at the left edge of the mirror. 2. Adjust the left rearview mirror: Place the horizon at the midline of the rearview mirror, then adjust the edge of the car body to occupy 1/4 of the mirror image. 3. Adjust the right rearview mirror: Since the driver's seat is on the left, the driver's grasp of the situation on the right side of the car is not very accurate. Additionally, due to the need for roadside parking sometimes, the ground area should occupy a larger portion when adjusting the up and down positions of the right rearview mirror, about 2/3 of the mirror surface. As for the left and right positions, adjust it so that the car body occupies 1/4 of the mirror surface area.

17

5

Share

Function of the Exhaust Valve?

The main functions of the exhaust valve are as follows: 1. It allows the exhaust gases from the car to be recirculated back into the cylinder for re-burning, and this small amount of exhaust gas reduces the temperature of the cylinder during the combustion process. 2. Nitrogen oxides are produced under high temperature and oxygen-rich conditions, so the exhaust valve suppresses the production of nitrogen oxides, thereby reducing the nitrogen oxide content in the exhaust gases. 3. When the accelerator reaches a certain opening degree, the exhaust valve will open, connecting the exhaust from the cylinder to the intake pipe, and then entering the cylinder again for cyclic combustion, ensuring complete combustion of the exhaust and purifying the air. Working principle of the exhaust valve: The high-pressure gas from the compressor, including gaseous working medium and lubricating oil, enters the exhaust valve and flows spirally along the guide vane. Through centrifugal force and gravity, the lubricating oil is separated from the working medium gas and accumulates along the inner wall of the cylinder. The working medium gas is discharged from the center pipe of the exhaust valve through multiple baffles. The separated lubricating oil is collected at the lower part of the oil separator and can be periodically discharged or automatically returned to the crankshaft box of the compressor via a float valve.

20

2

Share

How many factories does Toyota have in China?

Toyota has many factories in China, but only two joint ventures, namely Tianjin Toyota and GAC Toyota. Here is some relevant information about Toyota: 1. As one of the world's top ten automotive companies and the largest automobile manufacturer in Japan, Toyota was founded in 1933 and has now developed into a vast industrial group primarily engaged in automobile production, with businesses spanning machinery, electronics, finance, and other industries. 2. In its early days, Toyota mainly manufactured textile machinery. Founder Kiichiro Toyoda established an automobile department within the textile machinery workshop in 1933, marking the beginning of Toyota's automobile manufacturing history. In 1935, the Toyota Model AA was successfully prototyped, and the Toyota Motor Corporation was officially established the following year. However, the company grew slowly throughout the 1930s and 1940s. It wasn't until after World War II that Toyota accelerated its development. By introducing European and American technologies and under the guidance of U.S. automotive technology and management experts, Toyota quickly mastered advanced automobile production and management techniques. Tailoring these to Japanese characteristics, Toyota created its famous production management model, continuously refining and improving it, which significantly enhanced factory production efficiency. By the late 1960s, Toyota vehicles were flooding into the North American market. In 1972, the company had cumulatively produced 10 million vehicles.

2

0

Share

Is Blind Spot Monitoring Necessary to Install?

Blind spot monitoring is necessary to install as it can reduce the likelihood of collision accidents when changing lanes while driving. Below is more information about blind spot monitoring: 1. Introduction: The Blind Spot Monitoring System, also known as the Lane Change Assist System, abbreviated as BSM or BLIS in English, is a high-tech safety feature in vehicles. Its main function is to eliminate blind spots in the rearview mirror by using microwave radar to detect overtaking vehicles in the blind spots on both sides of the vehicle, alerting the driver to avoid accidents caused by blind spots during lane changes. 2. Principle: By installing two 24GHz radar sensors inside the rear bumper of the car, the system automatically activates when the vehicle speed exceeds 10KM/H. It continuously emits microwave signals to detect objects within 3 meters to the sides and 8 meters behind the vehicle. The system analyzes and processes the reflected microwave signals to determine information such as the distance, speed, and direction of the vehicles behind. Through system algorithms, fixed objects and those moving away are excluded. When a vehicle is detected approaching within the blind spot, the indicator light flashes. At this point, although the driver cannot see the vehicle in the blind spot, they can still be aware of an approaching vehicle from behind through the indicator light, indicating a potential collision risk when changing lanes, allowing them to react accordingly.

20

0

Share

What engine is used in the Nissan Qashqai 1.6?

Nissan Qashqai 1.6 is equipped with the Nissan HR16DE all-aluminum engine. The relevant introduction of the Nissan HR16DE all-aluminum engine is as follows: 1. The power curve of the HR16DE all-aluminum engine has the steepest slope between 3000 and 5000 rpm, where the acceleration performance is the best. Before 2500 rpm, the slope of the power curve is slightly smaller. After 5000 rpm, the slope of the power curve decreases sharply as the speed increases. To achieve the maximum power of 80Kw/6000rpm, fuel consumption may increase. 2. The torque curve peaks at 2500 rpm, 3500 rpm, and 4400 rpm, ensuring good acceleration performance of the HR16DE all-aluminum engine at low, medium, and high speeds. Between 3500 and 5000 rpm, the torque remains at a high output, making this range the best for acceleration. From the perspective of pursuing acceleration, gear shifting should be done within this range. After 5000 rpm, the torque curve begins to drop significantly, and the acceleration performance deteriorates.

7

2

Share

What to Do When the Car Navigation Display Touchscreen Malfunctions?

How to reset the tire pressure light on Dongfeng Fengshen Yixuan?

How to adjust the rearview mirror of Trumpchi GS4?

Function of the Exhaust Valve?

How many factories does Toyota have in China?

Is Blind Spot Monitoring Necessary to Install?

What engine is used in the Nissan Qashqai 1.6?

Is Lexus Fuel-Efficient?

What transmission does the Jetour X70M use?

What is the difference between automatic air conditioning and manual air conditioning in cars?

What is the freezing point of antifreeze?