What to Do When the Car Makes a Rattling Noise Upon Releasing the Throttle?

1 Answers
DiJaxson
07/29/25 11:58pm
Solutions for abnormal noises when releasing the throttle are as follows: 1. It is recommended to first check whether the valve clearance is too large, whether the fuel injector is damaged, or whether the carbon canister solenoid valve is faulty. 2. If the car makes a clicking noise when releasing the throttle, it could also be an issue with the engine oil. If the oil hasn't been changed for too long, the quality or type of oil may not meet the standards. Another possibility is oil leakage leading to insufficient oil levels. Therefore, remember to change the oil regularly. Engine oil plays a role in lubricating and cooling the engine. The engine is the heart of the car, and the oil is its blood. 3. It might be due to resonance from the under-engine guard plate. Simply tightening the guard plate can resolve this issue. Another possibility is a broken catalytic converter, which can cause a sand-like noise during driving.
Was this review help?
1
5
Share
More Forum Discussions

Where to Place the Internship Sticker?

Internship stickers should be placed on the rear of the vehicle. Novice drivers can obtain free internship stickers from traffic police departments and must affix or hang them as required. Novice drivers can collect internship stickers at traffic violation processing windows of local traffic police stations or vehicle management offices by presenting their driver's license. The internship sticker serves as a marker to alert others that a new driver is on the road, with yellow as the primary color and orange-red as the secondary color. According to Article 64, Paragraph 3 of Order No. 123: Drivers in the internship period must affix or hang a uniformly styled internship sticker on the rear of their vehicle. Traffic police remind that if internship drivers fail to affix or hang the uniform sticker on the rear of their vehicle; if the sticker cannot be normally recognized; or if the sticker does not meet requirements (such as homemade or printed stickers like 'new driver on the road'), it will be considered as not displaying the sticker.
14
3
Share

What are the causes of engine piston knocking?

Reasons for engine piston knocking: 1. Issues with the cooling system, such as cooling system leaks or insufficient coolant; 2. Engine oil leakage or excessive oil consumption, leading to oil deficiency; 3. High-speed or overload operation of the engine, causing excessive temperature; 4. Excessive clearance between the piston pin or cylinder liner; 5. Contaminated engine oil, resulting in poor lubrication; 6. Poor lubrication between the piston and cylinder, or the use of inappropriate engine oil. Methods to resolve engine knocking: 1. If knocking sounds occur in a low-temperature environment after starting the car and disappear as the temperature rises, this type of knocking can be temporarily ignored, and driving can continue; 2. If the knocking sound does not disappear and becomes more pronounced even when the engine temperature is normal, the owner should avoid high-speed driving and promptly stop to inspect, preventing potential traffic accidents; 3. If severe ovality, scoring of the cylinder is found after removing the cylinder head and extracting the piston, or if the clearance between the piston and cylinder is too large, the cylinder liner, piston, and piston rings should be replaced.
10
5
Share

How to Remove the Rear Seats of the X-Trail?

The method for removing the rear seats of the X-Trail: First, remove all five headrests, then unscrew the bolts on the backrest. Next, reach into the junction between the base and the backrest to locate the clips. Press down and push outward to release them. The X-Trail offers features like voice control, navigation, vehicle positioning, remote monitoring, vehicle status queries, and in-car WiFi hotspot. The voice control system supports scenarios such as navigation, entertainment, weather, and communication. In terms of configuration, the 2.5L X-Trail models come equipped with BOSE audio. Additionally, depending on the trim level, features like a smart sensor-powered tailgate and dual-zone automatic climate control are available.
20
2
Share

How to Replace the Air Filter of Chery Tiggo 3?

Chery Tiggo 3 air filter replacement method: 1. Open the glove compartment, then pull it upward with force, paying attention to the angle and avoiding excessive force; 2. After removing the glove compartment, you can see the air filter, remove the clips; 3. Pull out the old air filter and install the new one; 4. Reattach the clips and cover plate. The Chery Tiggo 3 is equipped with a multifunctional steering wheel, an 8-inch LCD display, Bosch 9.0 ESP body dynamic stability system, and hill start assist system. The Chery Tiggo 3 also features ESP electronic stability program, EBA brake assist control system, and TCS traction control system.
8
3
Share

How to Remove the Wrench Icon on Tiggo 5

Tiggo 5 wrench icon removal method: There is a button below the engine tachometer on the dashboard. Press and hold this button, then turn the ignition switch to ON position. After 3 seconds, release the button to eliminate the wrench icon. The wrench symbol is a maintenance reminder light, indicating that the vehicle requires scheduled preventive maintenance including inspection, cleaning, lubrication, adjustment or replacement of certain components. The Tiggo 5 measures 4506mm in length, 1841mm in width, and 1740mm in height, with a wheelbase of 2610mm and front-wheel drive configuration. For the interior, this model largely retains the design of its predecessor, featuring a dark color scheme for a sportier look. The steering wheel and center console are finished with piano black trim, enhancing the cabin's premium feel.
8
3
Share

What is the fuel tank capacity of the Toyota Prado in liters?

The fuel tank capacity of the Toyota Prado is 87 liters, and the manufacturer recommends using 92-octane gasoline. Before refueling, turn off the engine, locate the fuel tank cap release button on the left side of the driver's seat, and press it to open the fuel tank cap. The Toyota Prado is a mid-to-large SUV equipped with a 3.5L 280-horsepower V6 engine and a 6-speed automatic transmission. The engine has a maximum power output of 206 kW and a maximum torque of 365 Nm. The vehicle's dimensions are 4840 mm in length, 1885 mm in width, and 1890 mm in height, with a body structure of a 5-door, 7-seat SUV. The top speed can reach up to 175 km/h.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.