What to Do When the Car Headliner Fabric Detaches?

2 Answers
LenaLynn
08/30/25 6:24am
When the car headliner fabric detaches, you can remove the entire headliner, take off the old fabric, clean off the aged sponge on the surface, prepare a new piece of headliner fabric along with specialized headliner adhesive, spray adhesive on both sides, let it dry for 3-5 minutes before bonding, and finally reinstall the headliner. Here are some details about headliners: 1. Flat Headliner: The characteristic of a flat headliner is that it appears as a large flat or curved surface. This surface could be the underside of the roof's load-bearing structure, decorated with paint, wallpaper, etc., or it could be a suspended ceiling made of materials like light steel framing with gypsum board or mineral wool acoustic panels to form a flat or curved surface. 2. Suspended Headliner: Hanging various folded plates, grids, or ornaments below the load-bearing structure forms a suspended headliner. This type of headliner is often used to meet specific acoustic or lighting requirements or to achieve a particular decorative effect.
Was this review help?
10
1
Share
VanRichard
09/12/25 3:29am
I was quite frustrated when I discovered the car ceiling fabric had fallen off recently, but I managed to fix it myself. The usual causes are high temperatures or aging glue causing the fabric to loosen. I bought a special hot-melt glue gun and automotive interior adhesive. First, I parked the car in a cool place, thoroughly cleaned the ceiling surface with alcohol, and waited for it to dry completely. Then, I applied a thin layer of adhesive and carefully pressed the fabric back into place, using a few books to hold it down overnight to ensure it stuck firmly. The whole process took half a day, but it saved me a hundred or so in repair costs. To prevent this issue, it's important to avoid parking in direct sunlight for extended periods—using a sunshade can help. Remember to choose high-temperature-resistant glue; otherwise, the problem might recur, wasting effort. Regularly check the ceiling seams to catch any looseness early and prevent complete detachment.
Was this review help?
10
2
Share
Expand All
More Forum Discussions

What is the speed of F1?

F1 has an average speed of 200km/h, with a maximum speed reaching up to 350km/h. Here are the detailed explanations: Characteristics of F1 races: The most notable feature is not the pursuit of the highest speed, but the pursuit of the highest RPM. Current disclosed figures show that the engines of Ferrari and BMW have already exceeded 18,000 RPM. Factors affecting speed: For an F1 car to achieve its maximum speed, it also depends on the conditions of the race track. In the world, only three tracks—Nürburgring in Germany, Monza in Italy, and Spa in Belgium—can facilitate the highest speeds. These tracks are also known as the world's three fastest circuits.
18
5
Share

Does the Roewe i5 CVT transmission use a steel belt or a chain?

Roewe i5 CVT transmission uses a steel belt. There are two types of power transmission methods for CVT: one is a steel belt, and the other is a chain. Generally speaking, steel belts are usually suitable for low-torque engines, while chains are typically used for high-torque engines. In terms of actual performance, chains are undoubtedly more durable and resistant to wear. Below is some relevant information about CVT: 1. Introduction: CVT refers to a type of automotive transmission, also known as a continuously variable transmission. 2. Difference from stepped transmissions: The difference between CVT and stepped transmissions is that its gear ratio is not a series of discrete points but a continuous range of values, which achieves good fuel economy, power performance, and smooth driving experience, while also reducing emissions and costs.
16
2
Share

Where to go for a lost vehicle license: the registration location or the issuing location?

If a motor vehicle license is lost, the owner should apply for a replacement at the vehicle management office of the registration location. In case of a lost motor vehicle license, the owner must fill out the "Application Form for Replacement or Renewal of Motor Vehicle License Plates and Certificates" and submit proof of identity. The vehicle management office should issue a replacement license within one day of accepting the application. Vehicles applying for a replacement license must be within their regular inspection cycle. If the inspection cycle has expired, the relevant regulations for motor vehicle periodic inspections will apply. Additional information: Required documents and certificates include: Proof of identity of the vehicle owner, proof of vehicle origin such as the purchase invoice, the vehicle's factory-issued compliance certificate or import documentation for imported vehicles, proof of payment or exemption from vehicle purchase tax, proof of compulsory motor vehicle traffic accident liability insurance, and any other documents or certificates required by laws and administrative regulations during vehicle registration. For vehicles not imported through customs or exempt from safety technical inspections as stipulated by the competent department of motor vehicle products under the State Council, a motor vehicle safety technical inspection compliance certificate must also be submitted. Documents confirmed by the vehicle management office: Within two days of accepting the application, the vehicle management office should verify the motor vehicle, check the vehicle identification number (VIN) imprint, review the submitted documents and certificates, and issue the motor vehicle registration certificate, license plates, vehicle license, and inspection compliance mark.
5
3
Share

What is the F0 car?

F0 is a car model under BYD. Below are the relevant introductions of F0: 1. Exterior: U-shaped smiling grille, uniquely shaped headlights, integrated hatchback trunk door, small antenna on the roof, and a small raised rear end. The overall look is very cute, adorable, and stylish. 2. Interior: Most car dashboards have red lights, but this F0 features blue lights, which is quite creative. The space in this car doesn't need much evaluation—it's a microcar. 3. Performance: F0's power is quite fitting for its size. The top model of the 2015 version comes with a 1.0-liter three-cylinder engine, a 5-speed AMT transmission, delivering a maximum horsepower of 68 and a maximum torque of 90 Nm, with a fuel consumption of only 4.2L per 100 kilometers.
9
5
Share

What Does 'Bao Ti Dang' Mean?

'Bao Ti Dang' refers to the service of helping car owners retrieve their vehicle files from the vehicle management office and hand them over to the owner. This usually occurs in the buying and selling of used cars. Below are some precautions for used car transactions: 1. Check for Violation Records: It is recommended that both the buyer and seller check for any violation records before processing the transfer. The method is simple: log in to the local traffic management bureau website or the relevant vehicle management office website, enter the license plate number, and if there are any violation records, pay the fines promptly to avoid inconvenience for both parties. Special attention should be paid to violations in other regions, as the processing time for out-of-town violations is longer than for local ones. 2. Verify Normal Annual Inspection: Check the supplementary page of the vehicle license (driving license) to confirm whether the vehicle has undergone its annual inspection. Without an annual inspection, the transfer process cannot be completed. 3. Check the Tail Emission Compliance Certificate: If this is missing, not only will it need to be reissued during the next inspection, but fines may also be imposed, causing losses to the buyer. 4. Process Insurance Renaming: After the vehicle transfer, it is essential to promptly rename the insurance. Otherwise, disputes may arise with the insurance company in case of an accident. 5. Sign a Standardized Transaction Contract: Due to the numerous details involved in used car transactions, many aspects may not be fully considered. To protect the legal rights of both parties, it is advisable to sign a standardized transaction contract issued by the industrial and commercial administration. 6. Verify Seller’s Documents: When purchasing a car, carefully check the seller’s ID, original vehicle invoice, vehicle purchase tax certificate, vehicle license, road maintenance fee certificate, annual inspection certificate, and insurance policy. If any documents are missing, it may cause significant inconvenience when processing related procedures after the purchase.
14
4
Share

Where is the door opening button on the GL8?

The power door switch for the Buick GL8 is located above the B-pillar on the passenger side seatbelt. The middle door behind the driver's seat is manual, while the door behind the passenger seat is electric. Below is an introduction to the Buick GL8: 1. The Buick GL8 has four door opening methods: one is the opening switch located at the sunroof control, the second is the button switch above the B-pillar on the passenger side seatbelt, the third is opening from inside the middle door via the interior handle, and the fourth is opening via the buttons on the remote control. As a top-tier MPV model, the Buick GL8 is exported in bulk due to its advantages of luxury, powerful performance, and spacious comfort. 2. Advantages of the Buick GL8: The first major advantage of the Buick GL8 is its 'size'. With a length of over 5 meters accommodating only three rows of seats, the legroom is so spacious that no one can complain. The second advantage is its 'quietness'. During driving, the wind noise, road noise, and engine sound in the cabin are all very low. Long-distance travel on highways is where the GL8 excels, and its power performance is considered excellent by MPV standards.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.