What to Do When the Car Headlight Cover Turns Yellow?

1 Answers
VonRonan
07/29/25 10:09pm
Solutions for yellowing car headlight covers: 1. Wipe with a soft cloth: Whether cleaning the car or the headlight cover, always use a soft cloth to avoid scratching the car paint or the cover. 2. Regular cleaning: You can gently wipe with soapy water or cleaning wax using a soft cloth to remove stains. Soapy water is mild and non-corrosive, so it won’t affect the headlights. Alternatively, using a professional car cleaner is even better, as it not only removes dirt but also makes the headlights less prone to dust accumulation. 3. Polish and maintain: Apply polish first, then use a soft cloth to apply protective wax (car wax), which not only enhances the gloss and brightness of the headlights but also protects the car paint.
Was this review help?
14
5
Share
More Forum Discussions

Under what circumstances should a car undergo four-wheel alignment?

Circumstances under which a car should undergo four-wheel alignment include: 1. Damage to the chassis and suspension caused by an accident; 2. Replacement of the steering system and its components; 3. Unilateral wear on the front or rear tires; 4. Replacement or adjustment of the suspension system; 5. The car pulling to the left or right when driving straight. Steps for four-wheel alignment operation: 1. Connect the power and turn on the machine; 2. Attach the target to the wheel, with the target facing the camera; 3. Click to enter the measurement program on the computer page; 4. Open the camera to confirm if the target is correctly positioned front and back, and adjust the target if it is not; 5. Click to measure and follow the prompts to obtain the measurement data; 6. Adjust the total toe vehicle data to the green standard range.
16
2
Share

Can a Car Be Equipped with a Multifunction Steering Wheel?

Can a Car Be Equipped with a Multifunction Steering Wheel? The steps to install a multifunction steering wheel are as follows: 1. Use professional tools to remove the original steering wheel; 2. Use a screwdriver to remove the screws fixing the control levers for the headlights and wipers in the middle, then dismantle the upper and lower plastic covers and replace them with the new multifunction steering wheel; 3. Reconnect the electronic wiring to the corresponding positions, place the airbag in its designated position and secure it, then tighten the fixing screws on both sides of the steering wheel; 4. Code the new components to ensure the newly installed components function properly; 5. Use the vehicle diagnostic and maintenance information system to clear the vehicle's fault codes, ensuring successful coding, and perform a self-check on the vehicle's onboard computer.
13
0
Share

What are the pure electric vehicles from GAC Trumpchi?

GAC Trumpchi's currently available pure electric vehicles include: Trumpchi GE3, GAC ix4, and Qizhi EV. Among them, the Trumpchi GE3 and Qizhi EV are positioned as small SUVs, while the GAC ix4 is positioned as an entry-level compact SUV. Below are brief introductions of these models: 1. Trumpchi GE3: Features a floating roof design with slightly exaggerated pinwheel-style wheels. The rear of the car is also filled with 'triangular' elements, giving it a simple and playful look. In terms of dimensions, the car measures 4337/1825/1655mm in length/width/height with a wheelbase of 2560mm. Power-wise, the Trumpchi GE3 is driven by a pure electric system, with a motor outputting a maximum power of 163 horsepower (120kW) and peak torque of 290 N·m. It has a maximum range of over 310 km and accelerates from 0-100km/h in 9.3 seconds. 2. GAC ix4: Measures 4525mm/1852mm/1685mm in length/width/height with a wheelbase of 2640mm. The interior adopts the GS4's design, offering various wheel styles, front fog lights, and a sunroof depending on the model configuration. 3. Qizhi EV: The Qizhi EV is one of the few products in China built on a dedicated pure electric platform. It uses a new generation ternary lithium battery with an energy density of up to 160Wh/kg and a battery capacity of 54.75kWh. It consumes 14.7kWh per 100 km and has a comprehensive range of 410 km. Additionally, with its new-generation fast-charging technology, it can charge to 80% in 30 minutes and fully charge in 8 hours with AC slow charging, providing a 'powerful assist' for worry-free journeys.
10
2
Share

How to use the headlights of the Jetta VS5?

The method to use the headlights of the Jetta VS5 is: turn the lever on the left side of the steering wheel to activate the headlights. Rotating it one notch turns on the low beams, and rotating it two notches turns on the high beams. Taking the 2020 Jetta VS5 as an example, its body dimensions are: length 4419mm, width 1841mm, height 1616mm, with a wheelbase of 2630mm, a fuel tank capacity of 51 liters, and a trunk capacity of 482 liters. The 2020 Jetta VS5 features a front McPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.4L inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm, paired with a 6-speed automatic transmission.
20
4
Share

What is the method for checking the rearview mirror when changing lanes at night?

The method for checking the rearview mirror when changing lanes at night is: 1. First turn on the turn signal when changing lanes, then observe the rearview mirror; 2. If the rear vehicle is seen in the left rearview mirror in about one-fifth of the area at the left edge of the mirror, do not turn; 3. When the rear vehicle occupies one-third or half of the entire left rearview mirror and the whole vehicle can be seen, a safe turning operation can be performed. The method for adjusting the rearview mirror is: 1. Adjust the horizon image in the left rearview mirror to the center of the mirror; 2. Adjust the image of the left side of the vehicle to occupy one-quarter of the area on the right side of the mirror; 3. Adjust the horizon image in the right rearview mirror to two-thirds of the mirror's height; 4. Adjust the image of the right side of the vehicle to occupy one-quarter of the area on the left side of the mirror.
3
0
Share

What are the methods to remove carbon deposits from cars?

Methods to remove carbon deposits from cars are: 1. Add fuel additives when refueling; 2. Engine disassembly and cleaning; 3. Using a car drip cleaning system. Methods to prevent carbon deposits in cars include: 1. Turn off the engine 1 minute or 30 seconds after parking at the destination; 2. For manual transmission vehicles, increase the shift RPM. The impacts of increased carbon deposits in cars are: 1. Difficulty in starting; 2. Insufficient horsepower, unstable acceleration, and vibrations; 3. Air-fuel ratio imbalance; 4. Failure to meet emission standards; 5. Reduced combustion efficiency. The main components of car carbon deposits are: 1. Metal debris from engine friction and wear; 2. Dust from the air; 3. Viscous substances formed by the oxidation, thickening, and acidification of engine oil in high-temperature environments; 4. Paint film generated by the oxidation and concentration of lubricating oil.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.