What to Do When the Car Has No Electricity at All?

2 Answers
LeGrant
07/24/25 6:20am
If the car battery has no electricity at all, do not attempt to start the engine repeatedly, as this will deplete the remaining power of the already low battery. Once the battery is dead, you can use a jump start to get the car running. Here are other methods to deal with a dead car battery: 1. Contact a rescue vehicle: In an emergency, the most reliable method is to contact a rescue vehicle promptly. To avoid being unable to charge when the battery is dead, car owners should keep a set of jumper cables in the car. The main purpose of the jumper cables is to connect to the rescue vehicle. Once connected, start the rescue vehicle’s engine and increase its RPM to charge the dead car. 2. Jump start on your own: Alternatively, you can choose to jump start the car yourself. This method requires borrowing another car with a fully charged battery. Open the hoods of both cars, connect the positive and negative terminals of the dead battery to the corresponding terminals of the other car, and then start the other car’s engine. This will allow your car to start.
Was this review help?
15
3
Share
StLaila
08/11/25 2:06am
My car had completely run out of power, and I couldn't start it in the morning when I was in a hurry to go out. I felt anxious but managed to calm down. I asked my neighbor to bring his car over to jump-start mine. He connected the red clip to the positive terminal and the black clip to the negative terminal. After starting the engine, my car finally came back to life. Afterwards, I hurried to the repair shop and found out the battery was old and needed replacement. A reminder to everyone: keep a jumper cable in your car just in case. Usually, avoid leaving parking lights on for too long and start the engine more often to charge the battery, which can extend its lifespan by several years. If you encounter such a situation, don't panic—contact friends or family or call roadside assistance. Safety comes first.
Was this review help?
9
3
Share
Expand All
More Forum Discussions

Where is the wiper switch on a Mercedes-Benz?

Mercedes-Benz wiper switches are generally located on the left side of the steering wheel, combined with the light control on a single lever. The leftmost silver button controls the windshield washer fluid spray—pressing it inward from the outside activates the spray. Slightly to the right is the wiper function control, which can be rotated to switch between five modes: wiper off, low-frequency intermittent wipe, high-frequency intermittent wipe, continuous low-speed wipe, and continuous high-speed wipe. Always check if the wiper blades move in sync; if not, adjust them promptly. If some water remains on the windshield after several wipes, it indicates the rubber blades have aged. Avoid dry wiping, as it can damage the wipers and, if debris is present, may cause significant harm to the windshield.
6
3
Share

Can a C1 license be directly upgraded to an A2?

A C1 license cannot be directly upgraded to an A2. You can directly apply for an upgrade to A3, B1, or B2. The A2 driver's license is not something you can simply sign up for and take the test. China's driver's license management system is tiered, and to upgrade to a higher-level license, you must meet a series of conditions for the lower level to qualify for the exam. The upgrade process must follow certain steps. There are two upgrade paths: 1. From C1 to B1 to A2—C1 to B1 takes 3 years, and B1 to A2 takes another 3 years, totaling 6 years; 2. From C1 to B2 to A2—C1 to B2 takes 1 year, and B2 to A2 takes 3 years, totaling 4 years.
8
3
Share

How to Handle a Parking Ticket for Illegal Parking?

To handle a parking ticket for illegal parking, follow these steps: Bring the vehicle's registration certificate and the driver's (or handler's) license to the traffic violation office. Submit the documents to the staff, who will verify the illegal parking information and print a penalty decision notice. The vehicle owner must then take the notice to the bank to pay the fine, completing the process. The fine must be paid within 15 days of the penalty decision notice being issued; otherwise, a 3% late fee will be charged daily. When temporarily parking on the road, drivers must adhere to the following regulations: 1. Do not park in areas with no-parking signs or markings, on roads with barriers separating motor vehicle lanes from non-motor vehicle lanes or sidewalks, or in crosswalks or construction zones. 2. Do not park at intersections, railroad crossings, sharp curves, narrow roads less than 4 meters wide, bridges, steep slopes, tunnels, or within 50 meters of these locations. 3. Do not park in front of bus stops, emergency stations, gas stations, fire hydrants, or fire stations, or within 30 meters of these locations, unless using the facilities.
13
3
Share

Which country is the Triumph motorcycle brand from?

Triumph motorcycles are a British brand. The origins of Triumph motorcycles can be traced back to the late 19th century. In 1902, the first Triumph motorcycle was born at the Triumph factory in England. By the mid-1920s, Triumph had already become one of the leading brands in the UK, and in 1937, it introduced the world-famous 498cc parallel twin-cylinder Speed-Twin (T100). The 50s and 60s were the golden years for Triumph, with both its products and racing achievements being quite impressive. After experiencing the chaos of the 70s and the impact of Japanese manufacturers, British real estate businessman John Bloor purchased Triumph and led the brand towards a new era of development. The Street Triple 675R is one of Triumph's motorcycle models, launched in 2008. The main difference from the base version is that the R version features fully adjustable front and rear suspension, with a slightly higher seat height than the standard version. It is equipped with an inline three-cylinder, 12-valve, water-cooled engine, with major components produced in Japan, paired with a Japanese Keihin electronic fuel injection system, capable of delivering a maximum power output of 106 horsepower. In 2017, the 765RS was introduced to replace the 675R, capable of delivering a maximum power output of 121 horsepower at 11,750 rpm and 79 Nm of torque at 9,350 rpm, with a top speed of 272 km/h. It comes with five riding modes to meet both racing and street riding needs, as well as a new bi-directional quick shifter that automatically blips the throttle during downshifts. Dual-channel ABS anti-lock braking is standard.
17
2
Share

How Long Does It Take for a Car Battery to Recover After Being Drained?

If the car battery is drained, idling the engine for about 20 minutes or driving for half an hour can help it recover. For the next start, a healthy battery will not be affected at all. However, if the battery is severely drained, it is recommended to use a battery charger for proper charging. Otherwise, relying on the car's alternator for charging will take a significant amount of time and may not yield ideal results. Taking a 12V60Ah battery as an example, the charging method involves constant voltage with current limitation: charge at 14.8V with a 15A current limit for 16 hours, followed by a constant current of 3A for 4 hours, totaling 20 hours.
11
5
Share

Is it necessary to add fuel tank cleaner?

It is necessary to add fuel tank cleaner, especially when the car has been used for a certain period of time. The fuel tank cleaner ensures that the fuel quality is not affected by dirt generated in the tank, thereby reducing carbon deposits in the engine, which is a maintenance practice. Gasoline cleaner is a commonly used fuel additive in the market today. It is mixed with automotive gasoline and ignited, relying on its surface activity to help dissolve and break down deposits, remove carbon buildup, and thus perform a cleaning function. The engine gets cleaned, improving fuel efficiency, making fuel combustion more sufficient, saving fuel consumption to a certain extent, enhancing power, and reducing the emission of exhaust pollutants. Additive cleaning involves directly adding the cleaner into the fuel tank to mix with the fuel. When the vehicle is started, the cleaner enters the combustion chamber along with the fuel. As the cleaner enters the combustion chamber, it cleans the carbon deposits inside the engine to a certain extent. Other methods for cleaning carbon deposits are as follows: Drip cleaning: Drip cleaning, also known as no-disassembly cleaning, is a cleaning method currently promoted by 4S shops. This method uses a drip bottle to introduce the cleaner into the engine's intake pipe, where it is sucked into the engine combustion chamber along with the intake airflow. During this process, the cleaner cleans the carbon deposits in the engine's intake tract and combustion chamber. Disassembly cleaning: Disassembly cleaning involves removing parts of the engine with carbon deposits for cleaning. Although this method provides the best cleaning effect, due to the heavy workload and time-consuming nature, most 4S shops do not offer disassembly cleaning services.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.