···
Log in / Register

What to Do When the Car Gets Scratched and Dented?

4 Answers
DiMarcus
08/27/25 6:41am
The repair methods for a scratched and dented car are as follows: 1. If it's not particularly noticeable: You can buy car stickers to cover it up. Nowadays, there are many personalized stickers to choose from, which can conceal the flaw, add personality, and save money at the same time. 2. You can purchase a suction bridge-type repair device: This device uses suction cups to pull out the dented area. Use a large suction cup for big dents and a small one for small dents. Just follow the instructions. 3. You can go to a car beauty shop for repair: The repairman will perform sheet metal repair based on the condition of our car, but it will take relatively longer, about 3-5 days.
Was this review help?
1
4
Share
DelAdriana
09/09/25 5:32am
I often encounter this situation too—don't panic if your car gets a dent. Last time my own car got a small dent in the parking lot, my first step was to park it in a safe spot and carefully assess the damage. If it's a shallow scratch, you can fix it yourself with toothpaste or a touch-up pen; deeper dents require professional repair. When attempting DIY repairs, you'll need suction cup tools or a heat gun to gently pull out the dent, though the results may not be ideal. Professional shops use paintless dent repair (PDR) techniques, starting at a few hundred yuan, ensuring long-lasting results. I recommend regularly washing your car and inspecting the body, and avoiding parking in crowded areas. After handling the issue, check whether it affects structural safety—minor issues won't affect driving, but neglect could lead to water accumulation and rust. In short, try simple methods first, and if they don’t work, seek professional help promptly to avoid further damage.
Was this review help?
6
4
Share
Expand All
EmmanuelFitz
10/23/25 6:22am
It's really annoying when the car gets scratched, especially a brand new one! Last time I scraped the garage door, leaving a noticeable dent. I tried using a suction cup to pull it out, but it was hard to control the force; later, I used a touch-up paint kit bought from Taobao to spray, and the color matched quite well. However, before repairing, it's essential to clean the car body to avoid dust affecting adhesion. For minor damages, DIY can save money; but for deeper dents, it's better to go to a car beauty shop or 4S store, where they use advanced equipment for leveling, achieving better results. For daily prevention, I make it a habit to leave enough space when parking and install bumper guards. Cost-wise, DIY might only cost a few dozen yuan, while professional services start from three to four hundred. If you find a dent, don't rush to drive; check if there's a risk of water leakage, otherwise, it could affect driving in the rain.
Was this review help?
6
5
Share
Expand All
Florence
12/06/25 6:45am
Dented your car? Address it immediately to prevent further damage. I always inspect the affected area: if it's a shallow scratch on the door or hood, DIY tools can fix it; for deep dents or metal damage, head straight to a repair shop. Safety first: don't let dents compromise visibility or structural integrity. Recommended to handle on sunny days—working in wet conditions is hazardous. For small dents, use a heat gun to soften then pull, but wear gloves to prevent burns. Long-term prevention: park in monitored areas. After repair, test lights before driving.
Was this review help?
12
2
Share
Expand All
More Forum Discussions

How to Remove the Rear Seat Cushion of the New Santana?

The method to remove the rear seat cushion of the New Santana is as follows: Locate and pull the handles on both sides near the windows at the headrest area of the rear seats. The backrest of the rear seats can then be folded forward. Press the seat cushion directly toward the rear of the car and lift it upward to remove it. The New Santana is a compact sedan under SAIC Volkswagen, equipped with a 1.5L naturally aspirated engine, delivering a maximum torque of 145 N·m. The dimensions of the New Santana are 4475mm in length, 1706mm in width, and 1469mm in height, with a wheelbase of 2603mm. It has a top speed of 185 km/h and is paired with a 5-speed manual transmission.
11
3
Share

What car has the circled 'A' logo?

The circled 'A' logo represents the Acura brand, which is a luxury vehicle division of Japanese automaker Honda. The dimensions of this vehicle are 4985mm in length, 1975mm in width, and 1715mm in height, with a wheelbase of 2820mm. It features a 7-speed wet dual-clutch transmission and a top speed of 203 km/h. The Acura model is a 5-door, 7-seater SUV with a maximum engine power output of 240 kW and peak torque of 391 Nm. Its fuel tank capacity is 74 liters. The luggage compartment offers 234 to 1344 liters of space, with front MacPherson strut independent suspension and rear multi-link independent suspension.
12
2
Share

What are the precautions for running in a car during the break-in period?

Precautions for running in a car during the break-in period include: 1. During the first three days of the break-in period, the driving speed of the new car should be controlled at around 40 kilometers per hour. Avoid driving too fast because the engine, chassis, and transmission are all in their initial stages of use, and excessive speed can directly cause damage to the car. 2. During the break-in period, all the gears in the car are just starting to be used, and many gears may not be fully meshed yet. Therefore, it is essential to warm up the car before driving. 3. During the break-in period, avoid sudden acceleration and hard braking while driving, as such operations can cause damage to various components of the car.
15
2
Share

How to Deal with the Impact Feeling When Shifting to D Gear While Braking in Geely Boyue?

The solution to the impact feeling when shifting to D gear while braking in Geely Boyue is: shift to N gear when braking to avoid this situation. Taking the 2020 Geely Boyue Pro as an example, it belongs to the compact SUV category, with body dimensions of: length 4544mm, width 1831mm, height 1713mm, wheelbase 2670mm, fuel tank capacity 58l, and curb weight 1685kg. The 2020 Geely Boyue Pro features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.8l turbocharged engine, delivering a maximum horsepower of 184ps, maximum power of 135kw, and maximum torque of 300nm, paired with a 7-speed dual-clutch transmission.
3
3
Share

Do Low-Speed Electric Vehicles Require a Driver's License?

Low-speed electric vehicles require a driver's license. Below is relevant information about low-speed electric vehicles: 1. Driver's License Requirements: Electric vehicles also require a driver's license. According to relevant regulations, driving an electric vehicle requires a Class C driver's license. Therefore, as long as it is a small vehicle, whether it is a gasoline-powered car or an electric vehicle, a driver's license is required to drive on the road. 2. Advantages: Low-speed electric vehicles have zero or near-zero emissions; reduce water pollution caused by oil leaks; lower greenhouse gas emissions; improve fuel economy and engine combustion efficiency; and offer the advantages of smooth operation and no noise.
9
0
Share

Is Besturn a Domestic or Joint Venture Car?

Besturn is a domestic car brand. The models under Besturn include Besturn T33, Besturn X40, Besturn X80, Besturn T77, Besturn T99, and Besturn B70. Taking Besturn B70 as an example: it is a mid-size car equipped with a 6-speed manual transmission, with a length, width, and height of 4810mm, 1840mm, and 1455mm respectively, and a wheelbase of 2800mm. The tire specification of Besturn B70 is 225/50R18, with a maximum speed of 200 kilometers per hour. It is equipped with features such as driver's seat belt reminder, tire pressure monitoring, vehicle stability control, child seat interface, and cruise control.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.