What to Do When the Car Fogs Up on Rainy Days?

How often should a car be started if left unused for a long time?

It is recommended to start the vehicle at least every fifteen days, letting it run for over half an hour, and preferably moving the car or driving a short distance. Additional details are as follows: 1. Battery issues: The most common problem when a vehicle is left unused for a long time is the battery. After parking and locking the vehicle, although most electrical components enter a dormant state, certain parts of the vehicle still require power, such as the anti-theft system. Therefore, a small dormant current is generated, which, over time, can lead to a low battery charge, making it difficult to start the engine. To prevent this, it is necessary to periodically start the engine to recharge the battery. 2. Tire issues: Prolonged parking can cause the tires to bear weight at the same spot continuously, potentially leading to deformation over time. This can result in vibrations when driving. Hence, it is advisable to move the vehicle periodically to distribute the weight more evenly across the tires.

2

0

Share

Where is the Lincoln MKC horn located?

Lincoln MKC horn is located inside the bumper of the front wheels, and the position to press the horn is in the center of the steering wheel. The horn is the audio signal device of the car. During the driving process, the driver can issue necessary audio signals according to needs and regulations to warn pedestrians and attract the attention of other vehicles, ensuring traffic safety. It is also used to urge movement and transmit signals. The following is the connection method of the car horn relay: 1. 30 (red) is connected to the positive pole of the battery. 2. 85 is connected to one of the original car horn wires. 3. 87 is divided into two wires and connected to one side of each of the two horns. 4. 86 and the remaining two horn wires are connected to one of the original car horn wires (it is worth mentioning that if the horn does not sound, you can swap 86 and 85).

20

1

Share

What is the difference between secondary maintenance and tertiary maintenance?

The difference between secondary and tertiary maintenance lies in the scope of services. Secondary maintenance refers to routine maintenance, while tertiary maintenance is commonly known as "major maintenance". Secondary Maintenance: The purpose of secondary maintenance is to keep all vehicle components, machinery, and assemblies in good working condition. Service items include all tasks from primary maintenance, plus inspecting and adjusting the engine and electrical equipment, removing and cleaning the oil pan and oil filter, checking and adjusting steering and braking mechanisms, removing and cleaning front and rear wheel hub bearings, adding lubricants, inspecting tires and performing tire rotation, among others. Tertiary Maintenance: Tertiary maintenance involves disassembling, cleaning, inspecting, adjusting, and troubleshooting vehicle assemblies. Its goal is to ensure the proper functioning of assemblies and components by replacing parts that may fail after prolonged use. Major maintenance includes all routine maintenance tasks, plus engine disassembly and inspection to remove carbon deposits, gum residues, and cooling system contaminants; dismantling, cleaning, inspecting, adjusting, and troubleshooting chassis assemblies as needed; and inspecting the frame and body for rust or performing touch-up painting.

16

3

Share

What to Do When the Motorcycle Key Won't Turn

Solutions for a motorcycle key that won't turn: 1. Foreign objects in the lock: Check if there are any foreign objects inside the ignition lock. 2. Key deformation: Inspect whether the key is bent or twisted. 3. Insertion angle issue: After inserting the key, avoid pressing it downward; instead, turn it gently in a circular motion or slightly lift it upward before turning. Below is some information about motorcycles: 1. Definition of a motorcycle: A motorcycle is a two- or three-wheeled vehicle powered by a gasoline engine, steered by handlebars to control the front wheel. It is lightweight, flexible, and fast, widely used for patrolling, passenger and cargo transportation, and also as sports equipment. 2. Classification of motorcycles: Motorcycles are categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes. Road motorcycles can be divided into three main types: super sport motorcycles, touring motorcycles, and American motorcycles. Since these motorcycles are mainly used on smooth paved roads, they are also known as urban motorcycles. 3. Components of a motorcycle: A motorcycle consists of five main parts: the engine, transmission system, running gear, braking system, and electrical instrumentation equipment.

6

5

Share

Does the Geely Emgrand GS have an anti-collision beam?

Geely Emgrand GS is equipped with an anti-collision beam. The anti-collision beam is a U-shaped channel formed by stamping cold-rolled steel plates and is connected to the frame longitudinal beam. As the first barrier of passive safety in vehicles, the anti-collision beam is an important safety device that absorbs and mitigates external impact forces, protecting the front and rear parts of the car body. In terms of appearance, the new Emgrand GS 2020 continues the design concept of new sports mimicry aesthetics, offering two styles: the Dynamic version and the Elegant version, presenting two different design styles—sporty and sharp, and fashionable and elegant—providing users with more diverse personalized choices. In terms of safety features, the Geely Emgrand GS comes standard with advanced active safety configurations such as the Bosch 9.3 version ESP body stability control system, TPMS intelligent tire temperature and pressure monitoring system, HBA brake assist system, HHC hill start assist system, rear parking radar, and rearview camera with dynamic guide lines.

8

2

Share

How to reset the maintenance light on JAC Shuailing T6?

JAC Shuailing T6 maintenance light reset method: 1. Use the universal special diagnostic tool Tech2 for reset; 2. Turn off the ignition switch, press and hold both arrow buttons simultaneously, then turn on the ignition switch. After about 3 seconds, release the two arrow buttons. The maintenance menu will ask if you want to reset. Press and hold the SET button for more than 3 seconds, press the MODE button, then turn off the ignition switch to complete the reset. In terms of interior, the JAC Shuailing T6 pickup adopts a car-like design style, with a relatively refined interior and user-friendly configurations. It features a barrel-type instrument panel and an integrated trip computer, displaying detailed information. In terms of configurations, the JAC Shuailing T6 comes standard with ABS, EBD, rear parking radar, leather seats, multifunctional steering wheel, etc. Higher-end models are equipped with dual airbags, GPS navigation, a 7-inch display screen, Bluetooth phone, and rearview camera, among other features.

9

4

Share

What to Do When the Car Fogs Up on Rainy Days?

How often should a car be started if left unused for a long time?

Where is the Lincoln MKC horn located?

What is the difference between secondary maintenance and tertiary maintenance?

What to Do When the Motorcycle Key Won't Turn

Does the Geely Emgrand GS have an anti-collision beam?

How to reset the maintenance light on JAC Shuailing T6?

How to Replace the Battery in a Golf 7 Key?

How to Reset the Maintenance Light on a Hyundai Elantra?

How to Remove the Spark Plugs on a Hyundai Elantra?

Can You Continue Driving with a Red-Hot Turbocharger?