What to Do When the Car Displays Tire Pressure?

2 Answers
AnnaAnn
07/29/25 5:54am
The solution to the car displaying tire pressure is to check whether the tire pressure is too high or too low. The effects of insufficient tire pressure are: 1. Increased friction coefficient with the road surface; 2. Causes the steering wheel to feel heavy and prone to deviation; 3. Increases the movement of various parts of the tire, leading to abnormal heating due to excessive rolling; 4. Reduces the functionality of the cord and rubber, causing delamination or cord breakage. The effects of excessive tire pressure are: 1. Reduced tire friction and adhesion, affecting braking performance; 2. Causes steering wheel vibration and deviation, reducing driving comfort; 3. Accelerates localized wear of the tread pattern in the center of the tire, affecting the tire's lifespan.
Was this review help?
6
1
Share
StJoel
08/12/25 9:25am
When you see the tire pressure warning light on the dashboard, don’t panic. First, find a safe place to pull over and turn off the engine. I remember the same thing happened to my own car last time—low tire pressure is dangerous and can easily lead to a blowout or loss of control. Quickly check the pressure of all four tires. The recommended values for most cars are listed on the door frame or in the manual, usually around 30-35 PSI for the front tires and slightly higher for the rear tires. Grab a simple tire pressure gauge—they’re sold at home improvement stores or gas stations and aren’t expensive. Measure which tire is low and slowly add some air. If you find a puncture, like a nail, use a temporary tire repair kit to seal it, then head straight to a repair shop to get it replaced. Never rush onto the highway—safety first. Make it a habit to check tire pressure monthly or when refueling, and pay extra attention in winter as cold weather causes pressure to drop faster. These small actions can save fuel, extend tire life, and give you peace of mind while driving.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

Can the seat belt of Volvo XC90 retract automatically?

Volvo XC90's seat belt can retract automatically. Here is more information about Volvo XC90: 1. All vehicle seat belts are designed to retract automatically after use. The seat belt is connected to a retractor: the core component of the retractor is a spool, which is connected to one end of the seat belt. 2. The internal structure of the seat belt device varies in complexity depending on the vehicle's grade. More advanced seat belts are equipped with pre-tensioners and force limiters. The pre-tensioners can be rack-type, cable-type, or ball-type, and some pre-tensioners also use electric motors for retraction. 3. The principle of the seat belt buckle: when inserted and locked, pressing the buckle releases it. The seat belt buckle is a connecting device that can restrain the occupant within the seat belt while allowing quick release. The function of the buckle is to engage or disengage the seat belt. There is a micro switch inside the buckle. When the tongue is not inserted, the switch closes, which can activate the seat belt warning light and send a signal to the control unit. When the vehicle reaches a certain speed, it triggers light and voice alarms to remind the driver and passengers to fasten their seat belts.
3
1
Share

Which country is the Bugatti brand from?

Bugatti is a French automotive brand and a luxury car brand under the subsidiary of the German Volkswagen Group. The Volkswagen Group revived the Bugatti brand, establishing it as an independently operated French automotive brand, with its headquarters still located in Molsheim, France. Main models include the Veyron, Chiron, and others. The upper part of the Bugatti logo combines the letter 'E' reversed with the letter 'B', surrounded by small dots symbolizing ball bearings, with a red background. 'EB' stands for the abbreviation of Ettore Bugatti's name in English. The center features the Bugatti name written in white font. The red background of the logo represents passion, while the white font symbolizes elegance and nobility. Key milestones in Bugatti's development are as follows: In 1909, Italian Ettore Bugatti founded Bugatti in France, specializing in sports cars and high-end luxury vehicles. In 1909, a factory was built in Molsheim, Alsace. In 1956, Bugatti ceased production, having manufactured over 7,000 vehicles by that time. In 2008, Bugatti officially entered the Chinese market at the Beijing Auto Show. In August 2021, Porsche, Bugatti, and the Croatian automotive brand Rimac announced the formation of a joint venture to create top-tier electric hypercars.
9
1
Share

How Does a Four-Wheel Drive Vehicle Go Through the Inspection Line?

Four-wheel drive vehicles undergo the same annual inspection as two-wheel drive vehicles, with the only difference being in the exhaust emission testing. For four-wheel drive vehicles, exhaust testing can only be conducted using the idle condition method, unlike two-wheel drive vehicles which can use the simulated driving condition method. This is because the different rotational speeds of the front and rear wheels in four-wheel drive vehicles would result in varying exhaust emissions. Below is some information about four-wheel drive: 1. Four-wheel drive refers to a vehicle that maintains all four wheels driving throughout the entire journey, with the engine's output torque distributed to the front and rear wheels in a fixed ratio. This driving mode ensures excellent off-road and handling performance at all times. 2. Part-time four-wheel drive is a system where the driver can manually switch between two-wheel drive and four-wheel drive. By engaging or disengaging the transfer case based on driving needs, the driver can achieve either two-wheel or four-wheel drive. This is the most common four-wheel drive system found in off-road vehicles or SUVs with four-wheel drive capabilities. 3. On-demand four-wheel drive is a system that only activates four-wheel drive when necessary, otherwise remaining in two-wheel drive. This not only reduces the cost of manufacturing four-wheel drive vehicles but also provides users with better fuel economy. 4. Full-time four-wheel drive means that all wheels are independently driven at all times during vehicle operation.
20
5
Share

How to Set Up Honda Civic Reverse Radar When It Stops Beeping?

If the reverse radar is not beeping, it may be due to loose wiring. Simply check the wiring and reconnect it properly. Open the right-side lining panel in the trunk to test the continuity of the reverse radar wires. Open the fuse box and use a multimeter to check the continuity of the fuses related to the reverse radar. If the reverse radar module or buzzer is damaged, it needs to be replaced. Below are specific details about the reverse radar: 1. The full name of the reverse radar is reverse collision avoidance radar, also known as a parking assist device. It mainly consists of ultrasonic sensors, a controller, and a display (or buzzer). When the gear lever is shifted into reverse, the reverse radar automatically activates. 2. When the radar detects that the distance to an obstacle behind is too close, the buzzer or display device of the reverse radar will issue a warning to remind the driver to pay attention to the rear distance. The reverse radar only beeps when it senses an obstacle, typically at distances of 1.5 meters or 1.2 meters. If the reverse radar beeps and the driver continues to reverse, the beeping frequency will increase to alert the driver and prevent collision with the rear obstacle. 3. The reverse radar, also known as reverse collision avoidance radar or parking assist device, mainly consists of ultrasonic sensors, a controller, and a display. The reverse radar is a safety assist device for parking or reversing, providing drivers with information about surrounding obstacles through sound or a more intuitive display.
9
4
Share

Which Generation is the 2020 Golf Model?

The 2020 Golf is the seventh-generation model. The Golf is a compact car under the Volkswagen brand, and it also has a high-performance version. The Golf has gained popularity among many car modification enthusiasts in China. Here are some details about the 2020 Golf: 1. The 2020 Golf has a wheelbase of 2637 mm, with a length, width, and height of 4259 mm, 1799 mm, and 1476 mm, respectively. 2. The 2020 Golf is equipped with two engine options: a 1.2-liter turbocharged engine and a 1.4-liter turbocharged engine. 3. The 1.2-liter turbocharged engine delivers 116 horsepower and a maximum torque of 200 Nm. This engine reaches its maximum power output at 5000 to 6000 rpm and its peak torque at 2000 to 3500 rpm. It features direct fuel injection technology and an aluminum alloy cylinder head and block. This engine is paired with a 7-speed dual-clutch transmission. 4. The 1.4-liter turbocharged engine produces 150 horsepower and a maximum torque of 250 Nm. This engine achieves its maximum power output at 5000 to 6000 rpm and its peak torque at 1750 to 3000 rpm. It also features direct fuel injection technology and an aluminum alloy cylinder head and block. This engine is paired with a 7-speed dual-clutch transmission.
18
4
Share

What is Engine Torque Coefficient?

Torque coefficient is a general concept, and different objects have different torque coefficients. Torque coefficient is a proportional coefficient: In high-strength bolt connections, it refers to the proportional coefficient between the tightening torque applied to the nut and the axial preload (tightening axial force) introduced into the bolt. Introduction to torque: Torque, like power, is one of the main indicators of a car engine. It reflects in car performance, including acceleration, climbing ability, and suspension. Its precise definition is: the piston's reciprocating motion in the cylinder does a certain amount of work per cycle, measured in Newton meters.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.