What to Do When the Bumper of a New Car Gets Hit?

1 Answers
OMakayla
07/30/25 5:58am
After the bumper of a new car gets hit, it is necessary to check the severity of the situation and the specific location of the damage to the bumper. If the vehicle is new and has comprehensive insurance coverage, there is no need to panic. Simply call the insurance company and let them handle the situation. If the damage to the bumper is not severe, it can be repaired using a plastic welding gun. After repairing the cracks, the area should be repainted. If the bumper is completely damaged and cannot be repaired, it is recommended to go directly to a 4S store to replace it with a brand-new bumper.
Was this review help?
14
3
Share
More Forum Discussions

What is the left foot and right foot in a car?

Left foot is the clutch pedal, right foot is the accelerator or brake pedal. Below are relevant information about the clutch: 1. While driving: There may be times when the clutch is not needed, yet the left foot remains on the clutch pedal, which accelerates the wear of the release bearing. If the clutch is not in use, the left foot should not rest on the clutch pedal; 2. Distinguish between brake and clutch: Do not use the left foot to control the brake, as it can easily cause accidents. When shifting gears, the clutch pedal must be quickly pressed all the way down, otherwise smooth gear shifting is impossible; 3. When starting the vehicle: The driver should use the half-clutch technique to start the vehicle slowly, but the clutch should not be kept in the half-clutch state for a long time during startup, as this will accelerate the wear of the clutch disc.
11
5
Share

What type of oil is suitable for the Changan CS55?

The original oil specification for the Changan CS55 is SL-grade 5W-30 mineral oil. This oil is economical and reliable, having undergone precise matching and rigorous validation by the manufacturer, ensuring normal usage and engine longevity. Additionally, Shell-branded oil is recommended for the Changan CS55, with an oil capacity of approximately 4 liters. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity—5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the vehicle. The second number represents the kinematic viscosity of the oil at 100°C. A higher value means the oil can maintain its viscosity index better at high temperatures, which can also be understood as providing superior lubrication performance under high-temperature conditions. The method for changing the oil in the Changan CS55 is as follows: Wait for the engine temperature to cool down, allowing the oil to flow back into the oil pan. Use a wrench to loosen the drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine and let it run for 30 seconds to allow the oil in the main oil passages to drain out. Use a specialized wrench to remove the oil filter. Apply oil to the seal of the new oil filter and tighten it clockwise by hand. Add new oil through the engine valve cover filler port, typically filling up to three-quarters of a 4-liter oil container. Start the engine and let it run for 5 minutes, checking for leaks around the drain plug and oil filter. If leaks are found, perform necessary repairs. After stopping the engine, pull out the dipstick to ensure the oil level is within the standard range.
19
3
Share

How to Solve the High Fuel Consumption Issue of Cruze?

Solutions for Cruze's high fuel consumption are as follows: 1. Replace with low rolling resistance tires: Switching to low rolling resistance tires can improve fuel efficiency to some extent. 2. Avoid high engine RPM operation: When going downhill, you can release the accelerator pedal to let the vehicle coast. 3. Select the correct gear: Avoid unnecessary high-speed engine operation. For manual transmission vehicles, do not drive at high speed in low gear or at low speed in high gear. 4. Avoid sudden acceleration and braking: Sudden acceleration and hard braking will both lead to excessive fuel consumption. They also cause significant damage to the vehicle, easily resulting in excessive carbon deposits in the cylinder, affecting engine combustion efficiency and thereby increasing fuel consumption. 5. Maintain proper tire pressure: Both too low and too high tire pressure are detrimental. Too low pressure increases friction resistance and accelerates wear; too high pressure increases the risk of tire blowouts and causes greater damage to shock absorbers.
8
5
Share

What is the trunk size of the Volkswagen Lavida?

The trunk size of the Volkswagen Lavida is 1120 mm in depth, 1010 mm in width, and 560 mm in height. Below is a related introduction to the Volkswagen Lavida: 1. Configuration: The Lavida's in-car navigation system combines touch screen and knob control operation, with MP3 playback capability, supporting USB, AUX, and SD card expansion slots. It is user-friendly and feature-rich, with a foldable LCD screen design. 2. Powertrain: Equipped with a 1.4TSI engine and a 7-speed DSG automatic transmission, featuring energy-saving and environmentally friendly technologies such as Start-Stop and Recuporation (brake energy recovery).
6
5
Share

How to Use Vehicle Turn Signals?

Follow the "up-right, down-left" principle: turning the signal lever upward (clockwise) indicates a right turn, while turning it downward (counterclockwise) indicates a left turn. Below is relevant information about turn signals: 1. Introduction: Turn signals are crucial indicator lights activated when a motor vehicle turns, alerting surrounding vehicles and pedestrians. These lights use xenon tubes, controlled by a microcontroller circuit, with alternating left-right flashing operation. A flasher unit enables the blinking effect, categorized mainly into resistance-wire (thermal/bimetallic), capacitor, and electronic types (hybrid relay-based or fully electronic). 2. Structural Principle: Resistance-wire flashers include thermal (electrothermal) and spring-arm (snap-action) variants, while electronic types comprise hybrid (relay-contact combined with electronics) and fully solid-state designs. For instance, snap-action flashers utilize thermal expansion principles to abruptly move spring contacts, intermittently completing the circuit for flashing.
12
4
Share

What are the dimensions of the Senova X25?

The dimensions of the Senova X25 are 4110*1750*1545mm. Here is more information about the Senova X25: 1. Configuration: The vehicle design and manufacturing adopt international first-class production lines and utilize parts suppliers from the top 500 companies globally. The Senova X25 is equipped with practical features such as a rear parking radar, rearview camera, leather multifunction steering wheel, automatic climate control, and a central console LCD screen. 2. Safety Performance: The Senova X25 features a high-rigidity and high-efficiency energy-absorbing body design. A large proportion of high-strength steel is used, and the lightweight body design helps reduce collision inertia. The closed force transmission path disperses force throughout the vehicle, minimizing damage caused by collisions. A six-in-one airbag system provides comprehensive protection for occupants.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.