What to Do When the Buick Excelle Car Key is Locked Inside the Car?

Is Haval Fuel-Consuming?

Haval's fuel consumption ranges from 7.4L to 8.7L per 100 kilometers, which does not fall into the category of being highly fuel-consuming. Relevant information about Haval is as follows: 1. Introduction: Haval is a sub-brand of Great Wall Motors, established on March 29, 2013. The Haval brand, primarily focusing on SUV models, operates in parallel with the Great Wall brand, utilizing independent logos, product development, production, and service systems. 2. Haval H Series Products: Haval H2s, Haval H2, Haval H4, Haval H5, Haval H6, Haval H6 Coupe, Haval H7, Haval H9.

19

3

Share

What is the strength of the front anti-collision beam of the Qin Plus DM-i?

The strength of the front anti-collision steel beam of the Qin Plus DM-i is 1180DP. Here is more information about the Qin Plus: 1. Power: The Qin PLUS 2021 DM-i 55KM Premium model is equipped with a 1.5L naturally aspirated engine, with a maximum horsepower of 110Ps, maximum power of 81kW, maximum torque of 135N·m, paired with an E-CVT continuously variable transmission, and also equipped with an electric motor with a maximum horsepower of 179Ps and maximum power of 132kW. 2. Body dimensions: The Qin PLUS 2021 DM-i 55KM Premium model has a body length of 4765(mm), width of 1837(mm), height of 1495(mm), and a wheelbase of 2718(mm). As a compact car, the body dimensions of this model are moderate.

18

2

Share

How to Handle Illegal Parking Captured by Electronic Eyes?

If electronic police capture illegal parking, it usually refers to special operations by the command center or cases where the parking location severely obstructs traffic flow. In such instances, the penalty standard may not be based on illegal parking. If the penalty is confirmed as illegal parking, a fine of 200 yuan will be imposed without deducting points. The process for paying fines for illegal parking: 1. Confirm the violation: Verify that your traffic violation was captured by electronic surveillance before choosing any processing point to handle it. If it involves mobile electronic police, i.e., violations captured by traffic officers using cameras or video, you must go to the violation processing point under the officer's jurisdiction. 2. Present documents: The person or vehicle owner involved in the traffic violation is legally required to handle the matter. The involved party must present their vehicle license and driver's license to query and print the violation notice. 3. Verify information: On-site, check all terms and details on the violation notice. Only after confirming everything is correct can you sign. The involved party or the authorized representative must sign in the designated area. Once signed, it becomes legally effective immediately. 4. Complete procedures: If your vehicle or license is impounded, or if you are driving an out-of-town vehicle requiring a violation processing receipt, you must return to the processing point after payment to complete relevant procedures. In other cases, returning after payment is unnecessary. 5. Pay the fine: After receiving the electronic surveillance traffic violation administrative penalty notice, pay the fine within 15 days to avoid late fees. Failure to pay the fine on time will result in an additional 3% of the fine amount charged daily.

20

3

Share

How many years can Audi's original coolant be used?

Audi car coolant should be replaced every 2 years or 40,000 kilometers. Replacement time summary: The maintenance manual recommends replacing the coolant every 8 years or 160,000 kilometers, while some models require replacement every 10 years or 200,000 kilometers. Inorganic substances such as calcium chloride, organic substances like methanol, ethanol, ethylene glycol, glycerol, lubricating oil, as well as common household items like sugar and honey, can all serve as base liquids for coolant. Precautions for coolant replacement: During routine car maintenance, regularly check the coolant level. If it's insufficient, replenish it promptly. When adding coolant, note that different brands and types of coolant cannot be mixed, and it should not be added to a hot engine to avoid burns.

1

3

Share

What is the reason for Audi's flashing brake failure warning?

Audi's flashing brake failure warning is caused by excessive brake pedal travel. Excessive brake pedal travel in Audi: Excessive brake pedal travel results in delayed brake response, significantly reduced or even complete loss of braking effectiveness, and increased stopping distance. Solutions for excessive brake pedal travel: 1. If the pedal gradually rises and feels spongy when pumping the brakes repeatedly, but remains low after a brief pause, this indicates air in the brake system. The brake system should be bled in this case. 2. If the brake pedal feels firm with normal resistance but braking performance remains poor, this suggests wheel brake assembly issues such as: oil contamination on brake pads, poor pad contact, worn friction materials, or uneven brake drum wear. A thorough inspection of the braking system should be conducted, with necessary adjustments or repairs performed.

11

3

Share

Has the Issue of Excessive Formaldehyde in Audi Vehicles Been Resolved?

FAW-Volkswagen Audi invited the most authoritative third-party testing agency in China to conduct evaluations, testing the odor and emission performance of all component materials, components as a whole, and the entire vehicle. Various experiments were conducted, including formaldehyde tests, condensation tests, and total carbon tests. The final conclusion was that formaldehyde levels were not excessive, and there were no issues. Below are the relevant details: 1. Quality Inspection: Based on multiple rounds of inspections by several third-party authoritative agencies with CNAS and CMA certifications for in-vehicle air quality, as well as quality monitoring of batch vehicles by FAW-Volkswagen's odor testing laboratory with equivalent national certifications, it was found that the concentrations of volatile substances such as formaldehyde and benzene in FAW-Volkswagen-produced Audi models were within the national standard limits, according to the "Guideline for Air Quality Assessment in Passenger Compartments (GB/T27630-2011)." 2. Assurance: As one of the earliest passenger vehicle manufacturers in China to implement in-vehicle air quality control, FAW-Volkswagen has established a comprehensive in-vehicle air quality assurance system covering vehicle development, production, and after-sales services. Utilizing the highest-level component and vehicle chambers in China, the most advanced hardware analysis equipment such as liquid chromatographs and gas chromatography-mass spectrometers, and a subjective evaluation system by the "Golden Nose Team" with the same standards as Audi Germany, FAW-Volkswagen conducts multiple tests on the odor and emission performance of all component materials, components as a whole, and the entire vehicle. These tests include formaldehyde experiments, condensation experiments, total carbon experiments, and eight toxic and harmful substances specified by national standards, ensuring that the in-vehicle air quality meets both national standards and Volkswagen Group's air quality control requirements.

6

0

Share

What to Do When the Buick Excelle Car Key is Locked Inside the Car?

Is Haval Fuel-Consuming?

What is the strength of the front anti-collision beam of the Qin Plus DM-i?

How to Handle Illegal Parking Captured by Electronic Eyes?

How many years can Audi's original coolant be used?

What is the reason for Audi's flashing brake failure warning?

Has the Issue of Excessive Formaldehyde in Audi Vehicles Been Resolved?

What are the precautions for safe driving in rainy days?

How to Open the Front Hood of the VV6?

What are the reasons for the non-rotation of the Toyota Prado air conditioning fan?

Where is the car VIN code located?