What to Do When the Belt Squeaks After Getting Wet?

1 Answers
LeAniyah
07/29/25 1:10pm
The analysis of engine belt noise is as follows: 1. If the engine belt continues to make noise after the water has dried, it indicates that the belt is too loose. Solution: Replace the engine belt with a new one to eliminate the noise. 2. If the car passes through a waterlogged road and the noise is not loud, and the noise disappears after the water dries, solution: and if this phenomenon does not occur frequently, there is no need to replace the engine belt. 3. If the engine belt makes an unusually harsh noise after passing through a waterlogged road, it indicates severe damage to the belt. Solution: Replace the engine belt with a new one.
Was this review help?
13
4
Share
More Forum Discussions

What to Do When the Engine Yellow Light on the Car Dashboard Comes On?

When the engine yellow light appears on the car dashboard, it indicates that there may be an issue with the engine. There are two scenarios: if, when the power is turned on, all warning lights including the engine fault light illuminate and then turn off, this is normal. However, if the light remains on after the car is started, it signifies a fault in the vehicle. The engine yellow light is often related to fuel quality or sensor issues. Fuel quality concerns can involve both gasoline and engine oil. Gasoline comes in specific grades, and owners should use the grade recommended by the manufacturer. Similarly, engine oil varies between semi-synthetic and fully synthetic, and it should also be added according to the manufacturer's specifications. If the owner fails to follow these guidelines, prolonged use can lead to engine wear, triggering the fault light.
3
0
Share

What are the tips for U-turns and turns?

The tips for U-turns and turns are: 1. When making a U-turn, look at the right rearview mirror. Once you can see the intersection below the mirror, turn the steering wheel all the way, and straighten it when the car body is parallel to the road. 2. When turning, if you need to make a sharp turn, try to turn the steering wheel all the way, and then slowly straighten it after completing the turn. For wide turns, gradually turn the steering wheel. When making a sharp turn, if you feel you can't complete it in one go, first turn the steering wheel slightly in the opposite direction. This approach can extend the turning path, ensuring the car body levels out sooner and reducing the chance of scraping. If it still doesn't work, turn the steering wheel slightly in the opposite direction, reverse a bit, and then turn again.
12
1
Share

What to Do If a Car Without a Spare Tire Gets a Flat?

If a car without a spare tire gets a flat while driving, it is important to stabilize the steering wheel and slowly come to a stop. Then, set up a warning triangle behind the vehicle and call your insurance company or roadside assistance to explain the lack of a spare tire and arrange for a tow truck. The causes of tire wear are as follows: Excessive wear on both sides: The main reasons are insufficient inflation or prolonged overloading. When the tire is underinflated or overloaded, the contact area with the ground increases, causing the edges of the tire to wear prematurely. Excessive wear on one side: The main reason is misaligned front-wheel positioning. When the camber angle is too large, the outer edge of the tire wears prematurely. If the camber angle is too small or nonexistent, the inner edge of the tire wears prematurely. Sawtooth wear on the tread: The main reasons are improper front-wheel alignment or issues with the front suspension system, such as loose ball joints, which cause the normally rolling wheel to slip or continuously change alignment, resulting in sawtooth wear on the tire.
17
5
Share

What are the warning signs of brake failure?

Brake failure warning signs include: 1. A feeling of weakness when pressing the brake; 2. The vehicle pulls to one side when braking; 3. The brake pedal feels soft; 4. Unusual noises occur when braking; 5. The brake pedal does not return to its original position after being pressed and there is no resistance felt when pressing it. Solutions for brake failure are: 1. Release the accelerator pedal; 2. Shift to manual mode and manually downshift from high to low gears; 3. When applying the handbrake, hold the release button and pull the handbrake intermittently, not all the way; 4. After the vehicle stops, shift into park. The brake system consists of a vacuum booster pump, master cylinder, wheel cylinder, brake pads, and brake discs.
5
5
Share

What Does Crossover Vehicle Mean?

Crossover vehicles refer to any cross-combination of car models such as sedans, SUVs, MPVs, and pickup trucks. Their defining characteristic is that they cannot be classified into any single traditional vehicle category—neither as sedans, SUVs, nor MPVs—but instead incorporate the advantages of these vehicle types into one. They excel in body proportions, interior design, handling, and appearance compared to their peers. Examples of crossover vehicles include the Geely Emgrand GS, Mazda CX, Honda Crosstour, Mercedes-Benz GLA, BMW 3 Series GT, BMW X4, and BMW 5 Series GT. Taking the 2020 Geely Emgrand GS as an example, its body dimensions are: length 4440mm, width 1833mm, height 1573mm, with a wheelbase of 2700mm.
14
1
Share

Is it necessary to apply crystal coating for a new car?

It is necessary to apply crystal coating for a new car. Crystal coating refers to providing a reliable paint surface sealing technology for the car paint, offering efficient and long-lasting protection to prevent environmental impacts on the car paint's color. The process of crystal coating includes: 1. Covering the front windshield, license plate, and gaps; 2. Using polishing agents and ultra-fine swirl removers to eliminate fine scratches on the paint surface; 3. Degreasing the car paint surface; 4. Polishing the car paint surface with a professional crystal coating wipe. The benefits of crystal coating are: 1. The car surface is isolated from the external environment, reducing oxidation and effectively preventing acid rain from corroding the paint surface, thereby extending the lifespan of the car paint; 2. Making it easier to clean various dust, mud, and foreign objects on the car surface; 3. Reducing external damage to the car surface; 4. High resale value retention.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.