What to Do When the Audi Exhaust Fault Light Comes On?

Is Light Braking Required in School Zones for Subject Three?

Light braking is required in school zones for Subject Three. Similar to bus stops, the vehicle speed must be below 30 km/h when passing through, and light braking should be applied to slow down. If encountering situations like students crossing the road after school, the vehicle must stop and wait. Key locations requiring light braking in Subject Three: 1. Straight through intersections: Due to complex conditions at intersections, there may be vehicles or pedestrians passing. Learners should apply light braking in advance to reduce speed, keeping it below 30 km/h. Even if the light is green with no obstacles or pedestrians, light braking is mandatory. Failure to do so will result in immediate disqualification. 2. Left or right turns: Regardless of the direction, turn signals must be activated in advance, followed by deceleration (some learners may already be driving slowly but should still apply light braking before turning). 3. Bus stops: Passing bus stops usually comes with voice prompts. If not, pay attention to roadside signs and apply light braking to pass slowly. 4. Pedestrian crossings: Learners must apply light braking to slow down when passing pedestrian crossings. If pedestrians are crossing, the vehicle must stop and wait, ensuring it does not stop on the crossing. Avoid rushing or honking, as such behavior will lead to disqualification. 5. School zones: Similar to bus stops, the speed must be below 30 km/h, and light braking is required to slow down. If students are crossing, stop and wait. 6. U-turns: Deceleration is mandatory during U-turns, shifting to lower gears (1st or 2nd) if necessary. Failing to slow down will result in poor vehicle stability. 7. Oncoming vehicles: Learners must decelerate when encountering oncoming vehicles. The system usually provides instructions; even if no vehicle is present, follow the procedure and decelerate upon hearing the instruction.

10

4

Share

Where is the OBD interface located on the Mustang T70?

The OBD interface of the Mustang T70 is located below the left side of the dashboard, near the driver's left knee. The Mustang T70 is an SUV model under the Mustang brand, equipped with three types of engines: a 1.5L turbocharged engine, a 1.8L naturally aspirated engine, and a 1.8L turbocharged engine. Among them, the 1.5L turbocharged engine delivers 156 horsepower and a maximum torque of 215 Nm, with a maximum power speed of 5000 rpm and a maximum torque speed ranging from 2000 to 4500 rpm. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. The Mustang T70 adopts a MacPherson independent suspension at the front and a multi-link independent suspension at the rear. The multi-link independent suspension enhances the wheel's ground contact performance, thereby improving traction. The Mustang T70 has a body length of 4555mm, a width of 1835mm, a height of 2665mm, and a wheelbase of 2665mm.

17

0

Share

What is the minimum ground clearance of the new Verano?

The minimum ground clearance of the new Verano is 130mm. The Verano is a compact car under the Buick brand, equipped with two engines: a 1.0-liter turbocharged three-cylinder engine and a 1.3-liter turbocharged three-cylinder engine. The 1.0-liter turbocharged three-cylinder engine delivers 125 horsepower and a maximum torque of 180 Nm, with the maximum power output at 5,800 rpm and the maximum torque available from 1,350 to 4,500 rpm. The 1.3-liter turbocharged three-cylinder engine has a maximum power of 121 kW and a maximum torque of 240 Nm, with the maximum power output at 5,600 rpm and the maximum torque available from 1,500 to 4,000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. The dimensions of the new Verano are 4,718 mm in length, 1,802 mm in width, 1,471 mm in height, and a wheelbase of 2,700 mm.

5

3

Share

What is the method to reset the maintenance light on the new 2016 smart?

The method to reset the maintenance light on the new 2016 smart is: 1. Turn on the ignition key and press the reset button at the bottom left corner twice consecutively; 2. Turn off the ignition key while holding down the reset button; 3. Turn on the power, and the car's maintenance light will reset. The maintenance light serves as a reminder for the owner to perform proper maintenance. During daily driving, it is necessary to inspect various components of the car to avoid malfunctions while driving. The dimensions of the 2016 new smart are 2695mm in length, 1663mm in width, and 1555mm in height. The car is equipped with the following engines: 1. The 1.0L version engine has a maximum power of 52Kw, maximum torque of 91Nm, maximum horsepower of 71Ps, and uses multi-point fuel injection; 2. The 0.9T turbocharged engine has a maximum power of 66Kw, maximum torque of 135Nm, maximum horsepower of 90Ps, and also uses multi-point fuel injection.

17

1

Share

Are There Age Requirements for a Motorcycle License?

There are age restrictions for operating a motorcycle. Individuals under 18 years old are not allowed to ride a motorcycle. Those over 60 years old cannot obtain a new motorcycle license, and those over 70 years old will have their motorcycle license downgraded to an F-class license, which prohibits carrying passengers. Below are some requirements for applying for a motorcycle license: 1. Vision: Both eyes must have uncorrected or corrected visual acuity of at least 4.9 on the standard logarithmic eye chart. For those with monocular vision impairment, the better eye must have uncorrected or corrected visual acuity of at least 5.0 on the standard logarithmic eye chart, with a horizontal field of vision of at least 150 degrees. 2. Hearing: Both ears must be able to distinguish the direction of a sound source from 50 centimeters away using a tuning fork. 3. Lower limbs: Both lower limbs must be intact and have normal motor function, with a length discrepancy of no more than 5 centimeters; or, if the right lower limb or both lower limbs are missing or have impaired motor function, the individual must be able to sit upright independently.

7

4

Share

What is the fuel tank capacity of the Baojun RM5?

The fuel tank capacity of the Baojun RM5 is 48 liters, as officially announced. The Baojun RM5 uses 92-octane gasoline, with a fuel consumption of 6.7-7.4L per 100 kilometers. A full tank can cover a distance of 648-716km. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments. It is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safety limit. There is additional space from the safety limit to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.

10

2

Share

What to Do When the Audi Exhaust Fault Light Comes On?

Is Light Braking Required in School Zones for Subject Three?

Where is the OBD interface located on the Mustang T70?

What is the minimum ground clearance of the new Verano?

What is the method to reset the maintenance light on the new 2016 smart?

Are There Age Requirements for a Motorcycle License?

What is the fuel tank capacity of the Baojun RM5?

What Does the Three-Year Warranty for New Cars Cover?

What is the fuel tank capacity of the Jetta in liters?

What engine does the new Roewe RX3 have?

What are the symptoms of a faulty torque converter?