What to Do When the Airbag Light Comes On?

2 Answers
VanessaLynn
07/28/25 11:43pm
Solutions for the airbag indicator light coming on are as follows: 1. If you want the airbag light to turn off, simply rotate the car key to the 'on' position. 2. If the airbag indicator light flashes for 5 seconds and then stays on while the vehicle is running, it indicates a malfunction in the airbag system. The owner should promptly take the vehicle to a 4S shop for inspection and repair. Below is some relevant information about airbags: 1. Airbags are configured differently in various car models, generally including front dual airbags, side airbags, head airbags, and knee airbags. 2. In the event of a collision, airbags can reduce the severity of injuries to passengers and prevent secondary collisions. They also help protect passengers from being thrown out of their seats in dangerous situations such as vehicle rollovers, thereby ensuring a certain level of passenger safety.
Was this review help?
5
2
Share
DeMaggie
08/12/25 4:02am
The airbag warning light is really alarming. It indicates a fault in the safety system, meaning the airbag might not deploy in a crash, which is extremely dangerous—never ignore it. First, ensure your safety: avoid speeding or driving on highways, and find a place to pull over. Check if the battery is dead or has unstable voltage, as low voltage can trigger the light, but don’t tamper with airbag components yourself—they can explode and cause injury. It’s best to head to a 4S shop or professional repair center immediately for a computer diagnosis. Technicians will use a scan tool to pinpoint the issue, such as a faulty sensor or wiring problem, and repairs usually cost just a few hundred bucks. I always remind friends to service their cars regularly and avoid adding decorations near the steering wheel, as they can interfere with sensors. Airbags are life-savers—address any issues right away. What’s the point of saving on repairs when safety is at stake?
Was this review help?
20
2
Share
Expand All
More Forum Discussions

What are the body dimensions of the Fengguang e1?

The length, width, and height dimensions of the Fengguang e1 are 3699mm/1579mm/1515mm, which are official data. The length of the Fengguang e1 refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the supporting plane of the vehicle. The permanent magnet/synchronous motor of the Fengguang e1 has a maximum power of 33kw and a maximum torque of 125 N·m, with a single drive motor and a ternary lithium battery. This engine is matched with a fixed gear ratio transmission. The state has relevant regulations on vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include rearview mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. In other words, the significance of vehicle width data in national standards lies in providing enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, the state stipulates that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.
4
3
Share

How to Manually Deactivate the Lavida Anti-Theft System?

First, turn on the car and insert the key to ensure the vehicle is in the power-on state. Then wait until the anti-theft light on the dashboard flashes. Observe the dashboard - the car can only be started when the ID of the key chip matches the ID on the engine side. Turn off the car's power. The ignition key contains an electronic chip with a fixed ID. Wait for ten minutes, then turn the power back on. At this point, the anti-theft light will be flashing. Repeat the above operation three times to deactivate the Lavida engine anti-theft system.
15
1
Share

Can You Make a U-Turn at a Circular Signal Light?

At sections without prohibited U-turn signs, you can make a U-turn when the light is green, but you must not hinder the normal passage of other vehicles and pedestrians. Methods for making a U-turn at a circular signal intersection: One-step forward U-turn (using the left or right side of the intersection): To make a U-turn using the right side of the intersection, turn on the right turn signal, slow down, and shift to an appropriate gear. Observe the traffic on the right, turn right, proceed forward appropriately, then turn on the left turn signal before turning left. Observe the traffic ahead and behind, turn left, and complete the one-step forward U-turn after confirming safety. To make a U-turn using the left side of the intersection, turn on the left turn signal, slow down, and shift to a lower gear. Observe the traffic on the left and ahead, as well as behind. Turn appropriately based on the intersection position to complete the one-step forward U-turn. To make a U-turn using the right side of the intersection with reverse gear, turn on the right turn signal, proceed forward through the intersection, and stop. Shift into reverse gear, turn on the left turn signal, and use the interior and exterior rearview mirrors as well as turning your head to observe the traffic ahead and behind. Start moving, turn right, and back the vehicle into the right side of the intersection before stopping. Turn on the left turn signal, observe the traffic on both sides, and safely exit the intersection to complete the U-turn.
14
0
Share

What's the reason for high car water temperature and the fan not spinning?

There are three main reasons for high car temperature and the fan not spinning: 1. Motor damage: If the cooling fan motor of the car is damaged, it naturally won't spin. Replacing the motor can solve the problem. 2. Fuse or relay damage: If the power supply fuse or relay for the fan is damaged, located in the vehicle's engine compartment fuse box, replacing it can resolve the issue. The fuse box cover has position information. 3. Thermostat switch issue: Some faults in the thermostat switch can also affect the operation of the car radiator fan, so it's important to check this as well.
9
2
Share

What Causes a Car Door to Automatically Unlock After Being Locked?

Because the car is equipped with an automatic window lowering function. Or there may be an issue with the car's electrical circuit that requires immediate repair. Below is relevant information about car doors: 1. Design Requirements: Ensure convenient entry and exit for passengers, with the maximum door opening angle controlled at around 65° to 70°. During the opening process, the door should not interfere with other parts. When closed, the door must be securely locked to prevent it from opening while driving. 2. Definition: A car door provides access for the driver and passengers and isolates external disturbances. It also helps mitigate side impacts to some extent, protecting the occupants.
14
0
Share

What does a sports appearance package mean?

A sports appearance package refers to a complete set of components designed to enhance the vehicle's aerodynamic performance, reduce air resistance, and increase visual impact by adding external spoilers and splitters, thereby achieving a more sporty driving experience. The sports appearance package includes components such as body kits, underbody panels, roof racks, and rear spoilers. The body kit (external spoiler for the car body) primarily functions to reduce the reverse airflow generated during driving while increasing the vehicle's downforce, making the car more stable during movement, thereby reducing fuel consumption. It is also the most visually striking accessory that highlights personalization. When selecting a suitable body kit for a car, the following aspects should be considered: Hood: It should be lightweight, strong, and capable of withstanding high temperatures. Ideally, it should also help dissipate heat from the engine. Front lip: The front lip is the most prominent AEROPARTS that highlights the car's exterior personality. Generally, if the shape is not too sharp and has fixed fasteners (straps are not acceptable), it can be installed. However, overly low styles should be avoided, as they may cause inconvenience in daily driving. Front bumper spoiler: When selecting and installing, avoid overly sharp or protruding styles to prevent potential harm to pedestrians. GT-WING: The gap between the main wing and the car body should be less than 2CM. If it exceeds this measurement, the length of the main wing ends should leave a 1.5cm margin from the door panels. Side skirts: After installing the body kit, the minimum ground clearance should not be less than 9CM, and the catalytic converter heat shield should not be lower than 5cm from the ground.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.