What to Do When the Air Conditioning Heat Dissipation of a Truck is Poor?

2 Answers
DiPaislee
07/29/25 12:17am
If the air conditioning heat dissipation of a large truck is poor, first check whether the fan is faulty. If it is, replace it. Inspect the water tank for blockages; if there is dirt clogging, clean it. Check the condenser for faults or dirt blockages, and replace or clean it as necessary. Here is some additional information: 1. Composition of the air conditioning refrigeration system: The automotive air conditioning refrigeration system consists of a compressor, condenser, liquid storage dryer, expansion valve, evaporator, and blower, among other components. These parts are connected by copper pipes and high-pressure rubber hoses to form a sealed system. When the refrigeration system is operating, the refrigerant circulates within this sealed system in different states. 2. Condenser: The condenser, also known as the air conditioning radiator, is installed in front of the engine and can usually be seen by opening the front cover. Inspect the surface of the air conditioning condenser for any debris that may affect its heat dissipation. During summer use, flush the condenser with a water hose to facilitate heat dissipation, as a clean surface allows heat to be released more effectively. Regularly cleaning the condenser surface can significantly improve the cooling efficiency of the air conditioning system.
Was this review help?
10
3
Share
HoldenRose
08/12/25 4:32am
As a truck driver hauling goods, poor AC cooling is a common issue I face, especially during long summer hauls when the cabin feels like a steamer. A faulty cooling system not only leaves the AC ineffective but can also cause engine overheating, risking dangerous roadside breakdowns. Whenever this happens, I first pull over to inspect the radiator—checking for blockages from dust, lint, or insect debris, as cleaning often helps. If the fan isn’t spinning, it might be a blown fuse or loose wiring; keeping spare fuses onboard is handy. If the issue persists, never push through—head to the nearest repair shop immediately, as safety always comes first. Regular habits like cleaning the radiator grille and checking coolant levels during seasonal transitions can prevent major problems. In hot weather, carrying ice water for emergency cooling beats an overheated engine and a tow truck any day.
Was this review help?
20
3
Share
Expand All
More Forum Discussions

What does the car hazard warning light mean?

Car hazard warning lights (a triangular red button with an exclamation mark symbol) are signal lights that alert other vehicles and pedestrians to special situations involving the vehicle. When encountering a vehicle malfunction on the road and being unable to move to a safe area promptly, the hazard warning lights should be activated immediately to warn passing vehicles and pedestrians for safety and to call for assistance. Situations requiring the activation of hazard warning lights include: vehicle breakdown, highway breakdown, towing a faulty vehicle, sudden heavy rain while driving, transporting critically ill patients, emergency malfunctions while driving, temporary parking on the road, vehicle accidents, and when performing special tasks.
5
1
Share

Is a Wheel Alignment Necessary When Changing Tires?

When changing tires, a wheel alignment is not necessary; only wheel balancing is required. Situations that do require a wheel alignment include: 1. The steering wheel feels heavy, shakes, pulls to one side, is misaligned, or does not return to center; 2. Uneven tire pressure or tread wear; 3. Wheel vibration or wobbling; 4. The vehicle pulls to one side. The benefits of a wheel alignment are: 1. Enhanced driving comfort; 2. Extended tire lifespan; 3. Improved straight-line stability; 4. Reduced wear on suspension components; 5. Increased driving safety. The principle of wheel alignment is to adjust the vehicle's four-wheel parameters to ensure optimal driving performance and reliability.
9
5
Share

Which manufacturer produces Exeed cars?

Exeed cars are produced by Chery. Exeed is a premium brand under Chery Automobile Co., Ltd., and its models include: Exeed TX, Exeed LX, Exeed TXL, Exeed VX, Exeed EIUV, etc. Taking the Exeed TX as an example, this car is a compact SUV with a length, width, and height of 4690mm, 1885mm, and 1706mm respectively, a wheelbase of 2715mm, a fuel tank capacity of 55 liters, and a trunk capacity of 461 liters. In terms of power, the Exeed TX is equipped with a 1.6T turbocharged engine, delivering a maximum horsepower of 197 PS, a maximum power of 154 kW, and a maximum torque of 290 Nm, paired with a 7-speed dual-clutch transmission.
13
1
Share

What Causes the Engine Malfunction Light to Flash?

Engine malfunction light flashes due to: a component failure in the engine. The engine warning light is triggered by the ECU (Engine Control Unit), which manages all electronic components of the engine, such as the electronic throttle, fuel injectors, alternator, fuel pump, etc. If any of these systems malfunction, the engine warning light will illuminate. Solutions for a flashing engine malfunction light: 1. If the vehicle fails to start, it may be caused by a faulty fuel pump or ignition components—immediately call for assistance. 2. If the warning light is on but no abnormal driving symptoms occur, it might just be a sensor issue; in this case, you can continue driving temporarily but at low to moderate speeds. 3. If the engine warning light is on and the vehicle exhibits severe shaking, lack of power during acceleration, or other critical symptoms, stop driving immediately and call for roadside assistance.
8
1
Share

How to Handle Vehicle Annual Inspection in Another Location?

To handle vehicle annual inspection in another location, follow these steps: 1. Apply at the vehicle management office where the license plate was issued, and pay any fines at the location where the violations occurred; 2. For vehicles that cannot undergo inspection on time due to long-term assignments in another location, the owner should submit an application, which will then be forwarded by the original vehicle management office to the local office for proxy inspection; 3. The vehicle owner or unit must fill out the annual vehicle inspection form and submit the vehicle for inspection at a designated location on the date specified by the local vehicle management office; 4. To apply for an out-of-town inspection, visit the branch office of the vehicle management office corresponding to the address listed on the vehicle owner's identity document (for corporate entities, the organization code certificate is required).
19
1
Share

What is the Chinese equivalent of Euro VI emission standards?

Euro VI emission standards are equivalent to China VIa (National 6a) standards, but lower than China VIb (National 6b) standards. Currently, China has divided the National 6 standard into two phases: National 6a and National 6b, which were uniformly implemented nationwide in 2020 and 2023 respectively. The implementation of the National 6 standard imposes stricter requirements on pollutants such as carbon monoxide, nitrogen oxides, and hydrocarbons. The China VI Motor Vehicle Pollutant Emission Standard refers to the standard formulated to implement the Environmental Protection Law of the People's Republic of China and the Air Pollution Prevention and Control Law of the People's Republic of China, aiming to prevent and control environmental pollution caused by exhaust emissions from compression-ignition and gas-fueled spark-ignition engine vehicles, protect the ecological environment, and safeguard human health.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.