···
Log in / Register

What to Do When Taking the Driving Test (Subject 3) in the Rain?

4 Answers
VanLuna
07/28/25 11:55pm
When taking the Subject 3 driving test in the rain, you should pay attention to the following: 1. Adjust your mindset and prepare for the worst-case scenario before the test to avoid excessive nervousness; 2. Roads become slippery on rainy days, so be prepared to slow down in advance when stopping at traffic lights or pulling over; 3. Drive slowly in the rain, especially when turning or making U-turns; 4. Maintain a safe distance from other vehicles, as slippery roads increase braking distance. Subject 3 covers safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling procedures.
Was this review help?
17
1
Share
DelGabrielle
08/12/25 3:09am
I've coached many students for the third driving test in the rain. Rain makes the road slippery and visibility poor, which can easily lead to accidents. So, preparation is key. First, check if the windshield wipers are working properly to prevent rainwater from blocking your view. Also, make sure the lights are bright enough to illuminate the road conditions clearly. In terms of driving techniques, stay steady—reduce your speed by at least 10 km/h. When turning, avoid sudden steering; try to make smooth movements. Brake gently to prevent jerky stops. Keep a greater distance from the car in front of you as a precaution. Don’t panic—the examiner understands that bad weather makes driving harder and won’t be overly critical. Treat it as a real-world experience to build your skills. This way, you’ll not only pass safely but also learn the true essence of driving in the rain. Remember, regular car maintenance can prevent issues—like checking tire wear and drainage. These small details make a big difference.
Was this review help?
10
0
Share
Expand All
CarterFitz
10/01/25 6:33am
Last year when I took the driving test for Subject 3, it happened to be pouring rain. To be honest, I was quite scared at that time. But the instructor taught me some practical tips: Before the test, check the wipers and mirrors to ensure they don't fog up. During driving, reducing speed is key – for example, if you normally drive at 50, slow down to 40. Take turns slowly and avoid sudden braking. When braking, press the pedal lightly half a second earlier to control the distance, adding an extra two car lengths. Adjust your mindset – don't scare yourself. Take a few deep breaths and focus on the operations instead of dwelling on the test results. Safety comes first. If the rain is too heavy, you can ask the instructor if it's possible to reschedule. Practicing rainy-day driving skills is very important during regular training – for example, find an empty area to simulate driving in the rain. Becoming familiar with it will help you cope better during the test and boost your confidence.
Was this review help?
7
5
Share
Expand All
Stephen
11/14/25 8:20am
Taking the driving test (Subject 3) in the rain carries significant risks due to poor visibility and slippery roads, requiring extra caution. Before the test, it's advisable to check the vehicle's condition, ensuring the wipers and lights are functioning properly. While driving, reduce your speed, take turns smoothly without sudden steering, and increase the following distance when braking. Maintain a calm mindset and avoid nervousness. If you feel uncomfortable, prioritize safety by requesting to pause or reschedule the test. These are not just test techniques but also good habits to ensure the safety of both yourself and the examiner. Similarly, these principles apply to driving in rainy conditions. Regular vehicle maintenance, such as replacing worn wiper blades to prevent aging, can help reduce accidents.
Was this review help?
4
0
Share
Expand All
More Forum Discussions

What are the pros and cons of modifying a 300-cell header?

Modifying a 300-cell header has the following pros and cons: 1. Pros: Smoother exhaust flow and strong high-RPM horsepower. Exhaust modifications come in various forms, with many aimed solely at achieving a better sound. More professionally, they are adjusted to better match engine modifications, allowing the engine to perform more explosively. 2. Cons: Direct exhaust emissions fail to meet standards. Most modified direct-exhaust pipes suffer from weak low-RPM performance, increased noise, and excessively loud volume. Untreated exhaust emissions exceed limits, leading to severe pollution, unpleasant odors entering the cabin, and higher fuel consumption.
16
3
Share

What is the fuel tank capacity of the 2008 Buick model?

The fuel tank capacity of the 2008 Buick model is approximately 66 liters. Below is some related information about the 2008 Buick model: 1. For two vehicles with similar engine displacements, the larger the fuel tank capacity, the longer the driving range will be; 2. Generally speaking, the manufacturer's specified fuel tank capacity is slightly smaller than the actual capacity. Therefore, if the specified fuel tank capacity is 77 liters, the actual refueling amount might be more. The reason for this discrepancy is that the manufacturer's specified capacity is measured from the bottom of the tank to the safety limit, leaving some necessary safety space at the tank opening; 3. This design also ensures that the fuel inside the tank does not expand under high temperatures; 4. Under high temperatures, if the fuel tank is filled to the brim, fuel is more likely to spill out while driving. Additionally, overfilling the tank can lead to sediment, rust, and other factors that may affect the tank's capacity and, consequently, the engine's performance.
12
4
Share

Does the Fit feel unstable at high speeds?

The Fit does not feel unstable at high speeds. Here are some relevant details about the Fit: 1. The sensation of instability at high speeds is related to individual driving habits and the usual driving environment; 2. The Fit is inherently a compact car designed for urban commuting, so many people primarily drive it in the city and rarely on highways; 3. When driving the Fit on the highway, it may feel less stable compared to low-speed driving, but regular driving will help you get accustomed to it; 4. The Fit is an A0-class sedan, smaller in both body size and overall weight compared to standard compact cars. At high speeds, if there are strong crosswinds or when driving close to larger vehicles, you may noticeably feel the body is less stable; 5. Most Fit models are not equipped with the ESP electronic stability system, so all sensations of instability are directly transmitted to the driver, which is why many people say the Fit feels unstable at high speeds.
12
3
Share

Why Doesn't an Automatic Transmission Car Move When in Gear?

Automatic transmission cars may fail to move when in gear due to the following reasons: 1. Gear lock or incomplete braking when parking, directly shifting into P gear, causing gear braking. 2. Leakage in the automatic transmission oil pan. 3. Loosening of the linkage or cable between the control lever and the manual valve rocker arm, keeping the manual valve in neutral or park position. 4. Clogging of the oil pump inlet filter screen. 5. Severe leakage in the main oil circuit. 6. Damage to the oil pump. 7. If the entire vehicle cannot be powered on, the automatic transmission enters self-protection mode and will not shift; gear unlocking can be performed by pressing the black button above the transmission P gear.
3
5
Share

Is the Phideon the same class as the A6L?

The Phideon and the A6L are in the same class, and they are built on the same platform. Both models are mid-to-large-sized sedans. The Phideon is equipped with two types of engines: a 2.0-liter turbocharged engine and a 3.0-liter supercharged engine. Below are the details of the Phideon's engines: 1. 2.0-liter turbocharged engine: The Phideon's 2.0-liter turbocharged engine delivers a maximum power of 224 horsepower and a maximum torque of 350 Nm. This engine can output its maximum power at 4500 to 6250 rpm and its maximum torque at 1650 to 4500 rpm. It features hybrid injection technology and uses an aluminum cylinder head with an iron cylinder block. This engine is paired with a 7-speed dual-clutch transmission. 2. 3.0-liter supercharged engine: The 3.0-liter supercharged engine produces a maximum power of 299 horsepower and a maximum torque of 440 Nm. This engine reaches its maximum power at 5250 to 6500 rpm and its maximum torque at 2900 to 4500 rpm. It also features hybrid injection technology and uses an aluminum cylinder head and block. This engine is paired with a 7-speed dual-clutch transmission.
19
4
Share

How fast can the Yamaha FZ150 go?

Yamaha FZ150 has a top speed of approximately 130 kilometers per hour. Here is the relevant introduction of Yamaha FZ150: 1. The engine of Yamaha FZ is a 149cc single-cylinder air-cooled four-stroke engine; 2. The compression ratio of this engine is 9.6:1, with a maximum power of 9.5kw and a maximum torque of 13 Nm; 3. The maximum power speed is 7500 revolutions per minute, and the maximum torque speed is 6000 revolutions per minute; 4. The FZ150 motorcycle is equipped with a 5-speed transmission, and its fuel consumption is relatively low, approximately 1.7 liters per 100 kilometers.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.