···
Log in / Register

What to Do When Side Windows Are Blurred in Rainy Weather?

4 Answers
AliyahMarie
07/28/25 11:39pm
Methods to deal with blurred side windows in rainy weather include: 1. Turn on the window defogging mode; 2. Open the windows for convection to balance the temperature inside and outside the car; 3. Spray defogger on the glass; 4. Turn on the car's heating or cooling air to blow on the glass; 5. Apply soap evenly on the car windows. Precautions for driving in rainy weather include: 1. Slow down and maintain a safe distance from vehicles in front and behind; 2. Turn on the wipers to maintain good visibility; 3. Turn on the air conditioner to blow towards the windshield to reduce fogging; 4. Drive at low speed in waterlogged areas and detour if the water level exceeds the exhaust pipe; 5. Slow down at turns and avoid sudden braking; 6. Pay attention to the movements of non-motorized vehicles and pedestrians, and maintain a safe speed.
Was this review help?
16
3
Share
DawsonLynn
08/12/25 2:55am
I've encountered this situation too many times, the side windows fogging up on rainy days is really frustrating. I usually turn on the air conditioning defogger immediately and direct the vents towards the side windows. Remember to set the temperature a bit higher, as warm air works best for defogging. If the fog is particularly heavy, I dip a paper towel in some dish soap and wipe it on the inside of the glass—this trick is super cheap and effective. During regular maintenance, I also use glass coating agents on the windows, which makes rainwater slide right off without pooling. The rearview mirror heating function should always be on, otherwise changing lanes can be especially dangerous. Driving in the rain requires going slower than usual because visibility is reduced and reaction times are shorter—safety is the top priority.
Was this review help?
15
0
Share
Expand All
Liam
10/01/25 6:05am
After driving for ten years, I've found three main solutions to visibility issues in rainy weather. First, keep the car interior dry and avoid placing wet clothes directly on the seats. Opening windows slightly for ventilation helps quickly balance indoor-outdoor temperature differences, though this isn't practical during heavy rain. Professional anti-fog sprays are the most worry-free solution - one application lasts about half a month, and they cost just over ten yuan at supermarkets. Another trick is setting the air conditioning temperature about 5 degrees higher than outside, which prevents sudden fogging. Most importantly, maintain greater following distance in rain, and be extra cautious when changing lanes with foggy side windows - activating turn signals about 200 meters in advance is safest.
Was this review help?
16
4
Share
Expand All
Tanner
11/14/25 7:53am
Don't panic in this situation, I have a few simple solutions. First, turn on the air conditioning's external circulation mode and set the fan to maximum speed, directing it towards the windows. Keeping a dry towel in the car is very practical—use it to wipe the side windows at red lights. Nowadays, there's a good waterproof film available; after applying it, rainwater hardly sticks to the glass. If you park outdoors long-term, remember to regularly clean the wipers and drainage channels, as blockages can easily lead to water accumulation and fogging. Be extra cautious when driving in rain at night—blurred windows under dim streetlights are particularly hazardous. Following these measures should generally suffice.
Was this review help?
11
4
Share
Expand All
More Forum Discussions

How many kilometers does the EA888 timing chain need to be replaced?

The EA888 timing chain needs to be replaced after 60,000 kilometers. If the timing chain is not replaced for a long time, it can easily lead to stretching and wear of the chain, causing the gap to increase, and potentially resulting in timing chain misalignment, valve collision, or even cylinder damage. Vehicle owners should regularly inspect the timing chain based on usage conditions and environment. Function of the timing chain: The engine timing chain drives the valve train of the engine, ensuring that the intake and exhaust valves open or close at the appropriate times. This allows the engine's pistons to properly complete the four strokes of intake, combustion, power, and exhaust, ensuring the normal operation of the automobile engine. Hazards of not replacing the timing chain: During high-speed engine operation, the timing chain may stretch, wear, and develop increased gaps. If the chain elongates due to these gaps, it can cause inaccurate timing and increased noise. If the timing chain wears or stretches due to aging, leading to timing misalignment, the valve stems may bend, the piston tops may dent, and in severe cases, the cylinder head may be damaged, rendering the engine inoperable.
7
0
Share

How to Turn Off the Built-in Navigation Voice Prompts in Volkswagen?

Taking the Tiguan L as an example, here are the methods to turn off the onboard navigation: 1. There are settings in the navigation system where you can turn off traffic alerts; 2. Press the navigation button to access the stop function. Additional Information: 1. The Tiguan L is positioned as a mid-size SUV, with body dimensions of 4712mm in length, 1839mm in width, and 1673mm in height, and a wheelbase of 2791mm. 2. In terms of power, the Tiguan L is equipped with a 2.0TSI engine available in high and low power versions. The 330TSI low-power version engine has a maximum power of 137 kW and a peak torque of 320 Nm.
16
1
Share

What is the difference in insurance costs between 5-seater and 7-seater vehicles?

The differences in insurance costs between 5-seater and 7-seater vehicles are as follows: 1. Different compulsory traffic insurance: Compulsory traffic insurance and passenger liability insurance are calculated based on the number of seats in the vehicle. For family cars, those with 6 seats or fewer have lower annual insurance premiums than those with more than 6 seats. 2. Different seat insurance: Seat insurance, also known as passenger liability insurance, costs more for 7-seater vehicles as they have 2 additional seats compared to 5-seater vehicles. Below are other differences between 5-seater and 7-seater vehicles: 1. Annual inspection frequency: For 5-seater vehicles within 6 years, inspections are required every two years without the need for an on-site inspection. In many regions, this can be done directly through the official transportation department app, eliminating the need to visit the vehicle management office. For 7-seater vehicles within 6 years, inspections are also required every two years, but an on-site inspection is necessary. For vehicles older than 6 years, regardless of whether they are 5-seater or 7-seater, an annual on-site inspection is required. 2. Vehicle body marking: Enforcement varies by region. Generally, if the vehicle is not used for commercial purposes, even 7-seater vehicles do not need to have markings such as 'Approved capacity: 7 persons' on the body. However, in some areas where private vehicles are often used for commercial purposes, for the sake of unified management, such markings may be required during annual inspections.
13
2
Share

How to Check for Traffic Violations When Driving Someone Else's Car?

Methods to check for traffic violations when driving someone else's car are as follows: 1. Inquiry at the traffic management department: After committing a traffic violation while driving someone else's car, you can bring your ID card, driver's license, and the vehicle's registration certificate to the traffic violation processing hall or counter of the traffic management department for inquiry and handling. 2. Inquiry via the 12123 traffic management app: To check on the 12123 app, you need to register the non-personal vehicle under your driver's license and 12123 account. Once registered, you can check for traffic violations of the non-personal vehicle. With the aforementioned documents and by explaining the reason to the counter staff, you can inquire about and handle traffic violations even if the owner is not present. 3. Inquiry via the traffic management platform: On the 'Comprehensive Traffic Safety Service Platform,' enter the vehicle type, license plate number, and the last six digits of the engine number, then contact the vehicle owner to send a verification code for inquiry.
13
1
Share

What is the passing score for Subject 2 dsf?

Subject 2 requires a score of 80 to pass. Below are the key points to note for Subject 2 examination: 1. Reverse Parking: (1) Accurately align with reference points and lines, monitor the distance between the car body and the line via side mirrors to prevent the car from crossing the line. (2) Do not stop before the car is fully parked in the bay; ensure proper clutch control to avoid stopping midway or incomplete parking. After entering the designated area, park the car at the specified spot, then proceed with reverse parking; exit in the opposite direction and perform reverse parking once more; exit towards the designated exit to complete the test. 2. Parallel Parking: (1) Maintain proper distance from the parking bay when parallel to it, avoid crossing lines, and be cautious not to run over the bay corner when exiting. (2) Remember to use the turn signal when exiting. After entering the area, align parallel to the parking bay, drive to the left front of the bay, reverse into the bay from the right rear, exit, and the test is completed.
16
5
Share

What Causes Severe Jerking When Starting in First Gear in a Cruze?

Possible causes include uneven or deformed clutch plates, improper clutch adjustment, issues with the universal joint bearing, or problems with the clutch pressure plate contact. Excessive carbon buildup in the engine combustion chamber leading to incomplete combustion and affected power output. Loose engine fastening screws, etc. More details are as follows: 1. Main causes after excluding personal driving habits: Vehicle shaking during first-gear starts is generally caused by excessive wear of the clutch pressure plate. Manual transmissions primarily transmit power through the clutch, where the clutch pressure plate is responsible for kinetic energy transfer. The clutch pressure plate has a limited lifespan. Prolonged semi-engagement or the engine operating under excessive load for extended periods can accelerate wear on the pressure plate. 2. Solution: When the clutch pressure plate wears to a certain extent, power engagement becomes less smooth, causing vehicle shaking and unstable engine RPM. To resolve this issue, it is recommended that owners visit a repair shop or 4S dealership to have technicians replace the clutch pressure plate, which will eliminate the fault.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.