What to Do When Points Are Deducted from Your Driver's License?

How Long After the Physical Exam Can You Schedule Subject 1?

After completing the physical exam for driver's school enrollment, you can schedule the Subject 1 test online in about 7-10 days. Specific rules vary by region, so adjust according to actual circumstances. Enrollment in the driving school is only preliminary. After enrollment, the school submits the materials to the vehicle management office, which will issue a serial number upon successful submission. Receiving this serial number indicates successful enrollment, after which you can schedule Subject 1. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," Subject 1 consists of 100 questions, including single-choice and true/false questions, each worth 1 point. If you answer 11 questions incorrectly during the test, the system will automatically submit the test and end the exam. Subject 1 test content: Regulations on driver's licenses and motor vehicle management; Road traffic conditions and regulations; Road traffic safety violations and penalties; Regulations on road traffic accident handling; Basic knowledge of motor vehicles; Local regulations; Knowledge of braking systems and safety devices for large and medium-sized passenger and cargo vehicles; Specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 exam precautions: During the exam, students should pay attention to their attire—no sandals are allowed, and electronic devices and bags are prohibited in the exam room. Bring your ID card and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal items in lockers before entering the exam room. Upon entering, the identity verification station will assign a seat. After finding your seat, begin the exam. Ensure the camera is aligned with you and follow exam discipline. If you fail the first attempt, a retake is available the same day. If you fail again, you must pay to reschedule. After the exam, queue to collect your score sheet and sign it—unsigned sheets are invalid. There is no limit to the number of times you can schedule Subject 1. Each subject can be taken once, with one retake if you fail. If you do not take the retake or fail it, the exam ends, and you must reschedule. Subjects 2 and 3, however, allow only five attempts each. Scheduling for Subjects 2 and 3 must be done at least ten days later. If you fail the Subject 3 safe and civilized driving knowledge test, your previously passed road driving skills test scores remain valid. The driving test consists of three subjects: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the test on road traffic safety laws, regulations, and related knowledge. Subject 2 refers to the field driving skills test. Subject 3 is divided into two parts: road driving skills and safe and civilized driving knowledge. The safe and civilized driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official term (as per the Ministry of Public Security’s Order No. 123) does not include "Subject 4."

19

3

Share

What does the Φ symbol displayed on the car mean?

The Φ symbol displayed on the car represents the average fuel consumption. Average fuel consumption generally refers to the combined fuel consumption, which is the average value of fuel consumption under several different road conditions under specific circumstances. Typically, the combined fuel consumption is 'calculated' based on fuel consumption in both urban and suburban conditions. The basic calculation method is to divide the actual fuel consumption by the actual distance traveled. That is, fuel consumption per 100 kilometers = fuel consumption (liters) ÷ distance traveled (kilometers) * 100. The following are the reasons for high fuel consumption: 1. Improper driving habits: The amount of fuel consumption is closely related to the driver's personal driving habits, specifically manifested in not turning off the engine during long idling or frequent ignition, aggressive acceleration or frequent braking while driving, driving at low gear with high speed or high gear with low speed, etc. All these driving habits greatly 'contribute' to increased fuel consumption. 2. Abnormal tire pressure and tire wear: If the tire pressure is too low, the friction between the tires and the ground increases, resistance becomes greater, and fuel consumption will rise. Normal tire pressure is around 2.5bar, which can be appropriately reduced by 0.1bar in summer; of course, the tire pressure should not be too high either, and it is best to inflate according to the vehicle's standard value. In addition, if the tires are severely worn, slipping will frequently occur, and fuel consumption will also increase. 3. Fuel quality and carbon deposits: Many car owners do not pay attention to fuel quality. Poor-quality gasoline will increase carbon deposits, and excessive carbon deposits will roughen the intake pipe walls, affecting the intake effect and the quality of the air-fuel mixture, leading to a sharp increase in fuel consumption. Therefore, the quality of gasoline cannot be ignored; thus, regular maintenance at a 4S shop is a forward-looking investment, not only ensuring the normal performance of the vehicle but also saving unnecessary expenses in the future.

16

0

Share

What causes the ABS light to come on and can I still drive?

ABS fault light is on, it is recommended not to continue driving, because the ABS light indicates a fault in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, making it difficult for the driver to slow down or adjust the vehicle's trajectory, posing significant safety risks. The ABS light can illuminate in various states, each with different causes and solutions, as detailed below: State 1: ABS fault light remains constantly on (most common). Cause 1: The ABS wheel speed sensor's sensing part is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle speed and the wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Loose connections in the system wiring or poor contact in the ABS relay can cause signal issues, leading to system failure. Solution: Check the wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off when accelerating. Cause: When multiple vehicle electrical devices are in use, the battery voltage may drop below 10.5V. As the engine speed increases and voltage rises, the ABS indicator light turns off. The ABS system's power supply voltage is too low, possibly due to poor contact or grounding issues. Solution: Check the battery's specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light stays on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; poor contact in the ABS hydraulic valve body wiring connector; ABS computer failure. Solution: Loosen the grounding screw on the hydraulic valve body, then retighten it, cleaning the contact surface if necessary; check if the connector gap has widened; replace the ABS or ABS/ASR computer. State 4: ABS warning light illuminates during high-speed driving. Cause: At high speeds, the ABS computer detects a significant discrepancy between the rear and front wheel speed signals; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: With the engine running, press the brake pedal, push the brake switch linkage down with your finger, then release the brake pedal to complete the self-setting position; replace the brake light switch.

2

0

Share

How to Deal with Excessive Noise Inside the Car?

Solutions for excessive noise inside the car: 1. Install soundproofing cotton under the engine hood; 2. Add shock-absorbing plates and sound-absorbing cotton around the tires; 3. Replace the door sealing strips. Causes of excessive noise inside the car: 1. Engine noise: carbon deposits, damaged shock-absorbing components, aging sealing strips; 2. Tire noise: air noise caused by airflow in the tread gaps; 3. Wind noise: noise generated by pressure changes due to airflow separation around the car body; 4. Chassis noise: issues with shock absorbers can lead to louder sounds when the car passes over uneven road surfaces.

13

1

Share

How to Close the Sunroof on Volkswagen Tiguan?

The method to close the sunroof on Volkswagen Tiguan is: Press and hold the sunroof close button for a few seconds, and the Tiguan's sunroof will close. When using the sunroof, try to avoid opening it on bumpy roads to prevent deformation of components due to severe vehicle vibrations. The main maintenance for the sunroof is lubrication of the sliding rails. Lack of lubrication can lead to abnormal noises, poor movement, incomplete closure, and even motor burnout over time. The Volkswagen Tiguan is a compact SUV under SAIC Volkswagen, equipped with a 1.8T turbocharged engine that delivers a maximum horsepower of 160 PS and a maximum torque of 250 Nm.

17

5

Share

What is the solution for the emergency call function malfunction in the Lavida?

Volkswagen SOS emergency call function malfunction solution: It is necessary to go to a maintenance organization to check the fault code storage, and eliminate it after inspection and repair. Emergency call function role: The main role of the SOS emergency call system is to provide emergency rescue services based on user feedback when the vehicle is in an emergency situation. Emergency call function usage: When the vehicle malfunctions or is involved in an accident, or when encountering danger and facing an emergency situation, find the SOS button and hold it for more than 2 seconds. The vehicle's emergency warning and rescue system will automatically send out a distress signal and actively call the emergency department.

1

0

Share

What to Do When Points Are Deducted from Your Driver's License?

How Long After the Physical Exam Can You Schedule Subject 1?

What does the Φ symbol displayed on the car mean?

What causes the ABS light to come on and can I still drive?

How to Deal with Excessive Noise Inside the Car?

How to Close the Sunroof on Volkswagen Tiguan?

What is the solution for the emergency call function malfunction in the Lavida?

What does the car gecko mean?

How Long Can a Car Be Left Unused Without Affecting Its Performance?

How Long Can You Drive Without Brake Pads?

Can You Shift Gears Without Depressing the Clutch in a Manual Transmission?