What to Do When Paint Gets on Your Car?

Is unleaded gasoline 92 or 95?

Both 92 and 95 gasoline at regular gas stations are unleaded gasoline. The following is an introduction to unleaded gasoline: 1. Introduction: Unleaded gasoline contains only trace amounts of lead from crude oil, generally 0.01 grams per liter of gasoline. Its octane rating is 95, slightly lower than the octane rating (97) of other grades of leaded gasoline currently available. The use of unleaded gasoline can effectively control harmful substances in automobile exhaust, reducing pollution such as hydrocarbons (HC causing smog), carbon monoxide (CO toxic), and nitrogen oxides (NOx forming acid rain). 2. Notes: Unleaded gasoline is not harmless gasoline. In order to reduce the degree of air pollution and improve people's health, unleaded gasoline has been promoted nationwide since 2000, achieving the lead-free gasoline, fundamentally solving the problem of lead pollution in automobile exhaust. However, many people mistakenly regard unleaded gasoline as harmless green gasoline and relax their guard against automobile exhaust in daily life. In fact, unleaded gasoline still has many pollution problems.

5

0

Share

Does Installing an Electronic Exhaust Valve Damage the Car?

Installing an electronic exhaust valve does not cause significant harm to the car. Here is more information about electronic valves: Function: They are automated basic components used to control fluids, belonging to actuators; not limited to hydraulic or pneumatic systems; generally used in industrial control systems to adjust parameters such as medium direction, flow rate, speed, on/off, and others. The most commonly used types are check valves, safety valves, directional control valves, and speed regulating valves. Principle: A two-position two-way solenoid valve consists of two parts—the valve body and the electromagnetic coil—and features a built-in bridge rectifier circuit with overvoltage and overcurrent protection, adopting a direct-acting structure.

15

4

Share

Do gas stations refuel motorcycles?

Gas stations do refuel motorcycles, but a license is required. Below are the details: Introduction to gas stations: A gas station is a retail facility that provides fuel and lubricants for cars and other motor vehicles, typically offering fuel oil and lubricating oil. Due to the flammable, explosive, volatile, leak-prone, and static-prone nature of petroleum products sold at gas stations, safety is the top priority. Open flames are strictly prohibited within gas stations, as are any operations that may generate sparks. It is forbidden to add gasoline to a car's carburetor or portable containers. All vehicles must turn off their engines before refueling, and hazardous materials are strictly prohibited. Safety distance for motorcycle refueling points: Research shows that when "motorcycle refueling points" were initially set up, they were located in remote areas away from the main refueling zones and roads, ensuring safe and reliable operations. However, due to urban development in recent years, the safety distance between some gas stations' "motorcycle refueling points" and newly built roads has become insufficient.

16

2

Share

Will Applying Oil on Brake Discs Be Discovered?

Applying oil on brake discs is an act that should never be performed, regardless of whether it will be discovered or not, as it can lead to severe consequences. Below are the relevant details: Consequences: Oil stains can cause braking slippage during braking, which can easily lead to accidents. The standard procedure is to clean the surface with carburetor cleaner, let it dry, and then sand the contact surface with sandpaper. If engine oil spills onto the belt during an oil change, the belt will slip, and it will only function properly once the oil is removed. Introduction to Brake Pads: Brake pads, also known as brake linings, are the most critical safety components in a car's braking system. The effectiveness of all braking relies decisively on the brake pads, making high-quality brake pads the guardian of both the driver and the vehicle.

12

4

Share

Do hazard lights conflict with turn signals?

Hazard lights themselves are warning signals and operate on a separate circuit, but they share the same electrical device. When hazard lights are activated, the turn signals can still function, but pedestrians and drivers behind may not notice the turn signals being used. Below is relevant information: Car hazard lights: Commonly known as car double-flashing lights, hazard lights involve both turn signals flashing simultaneously, operating on the same principle as turn signals. On the vehicle's dashboard, there is a button with a red triangle that activates the hazard lights. Turn signals: Turn signals are important indicators that activate when a motor vehicle is turning to alert surrounding vehicles and pedestrians. Turn signals use a flasher unit to achieve the blinking effect. They can mainly be categorized into three types: thermal, capacitive, and electronic. In some compact cars, the hazard light switch is located near the steering column, featuring a small red knob that can be pulled up to activate the hazard lights. Turn signal bulbs use xenon tubes, controlled by a microcontroller circuit, alternating left and right flashes continuously.

15

4

Share

What are the model specifications of semi-trailer tires?

Semi-trailer tire model specifications include 12R22.5 tubeless tires, 11.00R(-)20 steel wire tires (bias tires), with a diameter of 1085mm; 11R22.5 tubeless tires, 10.00R(-)20 steel wire tires (bias tires), with a diameter of 1055mm; 12.00R(-)20 steel wire tires (bias tires), with a diameter of 1125mm. Below is the relevant introduction: Domestic standards: According to domestic standards (GB/T2978—1997), there are 11 types of truck tires. For micro and light truck tires, there must be ULT (micro vehicle tires) or LT (light truck tires) marks at the end of the designation, while medium and heavy truck tires do not have these marks. Examples include the designation for micro truck conventional section bias tires; the designation for light truck conventional section bias tires; and the designation for light truck conventional section radial tires, such as 6.00R16LT. Tire introduction: Tire diameter refers to the rim base diameter that supports the tire bead, rounded to the nearest half-inch value, such as 22.5 inches. Tire outer diameter is the diameter of a new tire without load (measured as the diameter length of the outer tire relative to the tread).

5

1

Share

What to Do When Paint Gets on Your Car?

Is unleaded gasoline 92 or 95?

Does Installing an Electronic Exhaust Valve Damage the Car?

Do gas stations refuel motorcycles?

Will Applying Oil on Brake Discs Be Discovered?

Do hazard lights conflict with turn signals?

What are the model specifications of semi-trailer tires?

What is the fuel consumption of the Tiguan L?

What Causes the Loud Noise in Civic's Air Conditioning?

Can Shared Cars Be Driven on Highways?

What are the reasons for the high fuel consumption of the Haval H2?