What to Do When Only One Side of the Old Tiida's Audio Speaker Works?

How to Display the Total Mileage on the X-Trail?

When the ignition switch is in the "ON" position, the total odometer/dual short-distance odometer is displayed on the vehicle information display. The total odometer① shows the total mileage of the vehicle. The dual short-distance odometer② displays the distance of a single trip. Below is relevant information about the new X-Trail: 1. Intelligent Drive Technology: The new X-Trail ensures smooth driving through its newly upgraded intelligent drive technology. The newly calibrated and upgraded intelligent all-mode four-wheel drive 4×4-i offers three driving modes: 2WD, AUTO, and LOCK, allowing automatic adjustment of the front and rear wheel torque distribution to the most suitable ratio for different road conditions. Whether on daily roads or slippery and rugged terrains, the vehicle can achieve an almost ideal driving state. 2. Configuration: The newly developed multi-link independent rear suspension of the new X-Trail adopts a dual-ring structure, increasing torsional rigidity by 30% compared to the current model, enhancing the vehicle's performance during high-speed straight-line driving. Combined with the newly calibrated MacPherson independent front suspension and high-speed damping control shock absorbers, the new X-Trail not only easily handles various road conditions but also provides ride comfort comparable to high-end sedans. The newly upgraded hill descent control system allows automatic speed adjustment when driving down steep slopes, significantly improving convenience and safety in handling.

9

3

Share

Can I Take Subject Four After Passing Subject One?

You cannot take Subject Four immediately after passing Subject One. According to Article 31 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": The vehicle management office shall accept applications that meet the conditions for a motor vehicle driver's license and arrange examinations according to the scheduled date. The examination sequence follows Subject One, Subject Two, and Subject Three in order. Only after passing the previous subject can you proceed to the next. After passing the road driving skills test of Subject Three, you are then eligible to take the safety and civilized driving common sense test. Passing score for Subject One: The total time for the Subject One test is 45 minutes. The test paper consists of 100 questions, including true/false and single-choice questions, with a full score of 100 points and a passing score of 90. The test paper is randomly selected and combined by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Specifications". Examination process: Follow the staff's instructions and collect your driving training file in order in the waiting area; Carry and present your ID card for verification by the supervising officer; Mobile phones must be turned off when entering the examination area; No loud noise is allowed in the examination area; Regulation textbooks are not allowed in the examination area (or should be placed in your bag); After the examination, keep your ID card safe and submit the file to the "Submission Window" at the front of the examination room; Candidates who pass the examination should sign under the guidance of the staff at the exit before leaving; Candidates who fail the examination can leave immediately and wait for the driving school staff to notify them of the retake time.

1

2

Share

Where is the throttle valve located in a van?

The throttle valve in a van is positioned behind the air filter of the intake system and in front of the intake manifold, with the air cleaner above it and the engine block below. The throttle valve serves as the throat of the automobile engine, connecting the air cleaner and the cylinder block. It regulates the engine's air intake. When the driver presses the accelerator pedal, it doesn't directly control the fuel injection but rather adjusts the throttle opening. There are two types of throttle valves: traditional cable-operated and electronic. In traditional engines, the throttle valve's operating mechanism works via a cable connected at one end to the accelerator pedal and at the other to the throttle linkage plate. The electronic throttle valve uses a throttle position sensor to control the opening angle based on the engine's energy requirements, thereby adjusting the air intake. If the throttle valve is not cleaned regularly, carbon deposits can easily form. Determining when to clean the throttle valve: Use a computer to read the throttle opening at idle; if it's significantly larger than when the vehicle was new, cleaning is needed. Alternatively, base the decision on mileage—generally, clean every 20,000 kilometers, though this varies with usage, such as more frequent cleaning for vehicles often driven on dusty roads. Another method is to remove the intake duct and directly inspect the throttle valve for carbon buildup. Methods for cleaning the throttle valve: Disassembly cleaning involves removing the entire throttle assembly and thoroughly cleaning it with a specialized cleaner. This method is more labor-intensive but ensures a thorough clean. Non-disassembly cleaning has two approaches: one involves removing the intake duct and spraying cleaner onto the throttle valve while the engine is running, using a specialized tool; the other involves spraying cleaner onto the throttle valve and wiping it, requiring two people for convenience, though the cleaning is less thorough and suitable for throttle valves with minimal carbon deposits. Electronic throttle valves integrate a control unit, so care must be taken during cleaning to avoid damaging the internal circuit board.

1

3

Share

Can a car designed for 95 octane use 92 octane fuel?

A car designed for 95 octane can occasionally use 92 octane fuel. Occasional mixing of fuel grades may not cause significant harm. However, when refueling next time, it is necessary to drain the tank and refill with the normal octane rating. If mixed fueling is frequent, the consequences could be severe. The vehicle may experience clogged fuel injectors, increasingly severe carbon deposits, abnormal fuel consumption, and other issues. The difference between 92 and 95 octane is that 95 octane is more resistant to knocking. It is best not to mix different octane grades, as short-term mixing may not cause major damage, but long-term mixing should not be ignored. Prolonged mixing of different octane grades can affect the lifespan of the car's ignition system, fuel injectors, and spark plugs, leading to earlier major repairs. The differences between 92 octane and 95 octane gasoline are as follows: Different octane ratings: 92 octane gasoline: contains 92% isooctane and 8% n-heptane. 95 octane gasoline: contains 95% isooctane and 5% n-heptane. Different gasoline quality levels: The octane rating represents the gasoline's octane number. Higher octane ratings indicate higher octane numbers, which provide better anti-knock performance. This results in smoother engine operation, reduced wear, and better engine protection. Different octane numbers lead to different anti-knock performances. Gasoline is a mixture produced by adding a certain amount of anti-knock agent to the same base gasoline, resulting in gasoline with varying anti-knock properties. Different gasoline components, such as straight-run gasoline, catalytic cracking gasoline, and catalytic reforming gasoline obtained from petroleum refining, are refined and blended with high-octane components, primarily used as fuel for automotive spark-ignition internal combustion engines. The chemical compositions of these two gasoline grades are similar, but 95 octane gasoline has higher fuel efficiency and provides more power. Generally, naturally aspirated cars use 92 octane fuel, while turbocharged cars use 95 octane fuel. Effects of mixing 92 and 95 octane gasoline: Shortens the lifespan of the car's ignition system, fuel injectors, and spark plugs. Advances the timing of major vehicle repairs. Causes unstable engine power. Increases exhaust pollution and harms the environment. Occasional mixing of fuel grades may not cause significant harm. However, when refueling next time, it is necessary to drain the tank and refill with the normal octane rating. If mixed fueling is frequent, the consequences could be severe. The vehicle may experience clogged fuel injectors, increasingly severe carbon deposits, abnormal fuel consumption, and other issues. Refueling precautions: When refueling: Turn off the engine, do not make phone calls or use mobile phones, and do not use open flames in the gas station. Do not make phone calls or use mobile phones in the gas station. Always turn off the engine when refueling. If there is a queue, wait in line and avoid cutting in. When selecting fuel: Always choose gas stations with good fuel quality and avoid those with poor fuel quality. Long-term use of low-quality gasoline can lead to increased carbon deposits in the engine. Not only should you choose gas stations with good fuel quality, but also the correct octane rating. Choosing the right octane rating is crucial. Generally, the manufacturer's recommended octane rating is printed on the inside of the fuel filler cap. Follow the instructions for refueling. If the label states: Use 92 octane or higher, then both 92 and 95 octane can be used, but they should not be mixed. If the label states: Use no less than 95 octane, then only 95 or 98 octane can be used, and 92 octane should not be used. Higher octane ratings are not always better. The engine's compression ratio must match the octane rating. If a low-compression engine uses high-octane gasoline, it may reduce engine knocking but can alter the ignition timing, leading to increased carbon deposits in the cylinders, which can affect the engine's lifespan over time. If a high-compression engine uses low-octane gasoline, the engine is more prone to knocking, accelerating the wear of engine components.

7

4

Share

What Causes Shaking When Shifting Gears in a Car?

There are three main reasons for shaking when shifting gears in a car: Driving habits: The driver may have issues with the gear-shifting operation, resulting in poor coordination between the throttle and clutch. Transmission components: Loose or severely worn parts, a locked or loose clutch operating mechanism, severe wear on the clutch spline, or a bent transmission input shaft can cause clutch shaking. In such cases, the corresponding parts should be replaced. Loose engine mounting: A loose engine mount or misalignment between the transmission input shaft and the engine crankshaft centerline can also lead to clutch shaking. The engine should be tightened or the parts replaced in this scenario.

4

2

Share

What are the English abbreviations related to cars?

Here are some English abbreviations related to cars: ABS: Abbreviation for Anti-Lock Brake System, meaning 'Anti-lock Braking System'. Without ABS, when a car brakes suddenly, all four wheels lock completely, causing the car to skid sideways with even a slight lateral force, leading to severe swaying or even a complete spin. CVT: Continuously Variable Transmission. Currently, cars on the market are mainly equipped with manual transmissions (MT), automatic transmissions (AT), or continuously variable transmissions (CVT). EDS: Electronic Differential Lock, an extension of ABS functionality, used to detect whether a car's wheels are losing traction, thereby controlling acceleration skidding.

15

4

Share

What to Do When Only One Side of the Old Tiida's Audio Speaker Works?

How to Display the Total Mileage on the X-Trail?

Can I Take Subject Four After Passing Subject One?

Where is the throttle valve located in a van?

Can a car designed for 95 octane use 92 octane fuel?

What Causes Shaking When Shifting Gears in a Car?

What are the English abbreviations related to cars?

How long can the renewal date of a B2 driver's license be exceeded?

What procedures are required to switch from C1 to C2 after passing Subject 1?

Should You Press the Clutch When Releasing the Handbrake to Start the Car?

Why does the 2013 Peugeot 408 have high fuel consumption?