What to Do When New Energy Vehicle Battery Overheats?

What happens if too much manual transmission fluid is added?

Excessive manual transmission fluid can lead to high oil pressure, which may cause oil seal leaks. Additionally, the excess fluid can overflow through the vent hole, increasing internal gear resistance. The following are expanded scenarios of overfilling manual transmission fluid: 1. Clutch damage: When the fluid exceeds the dipstick line and submerges the gears, starting the car requires the gears to overcome the fluid's resistance, resulting in power loss. Moreover, the agitation of the gears can cause the fluid to foam, introducing air into the oil passages and reaching the clutch. When shifting into D gear, air trapped between the clutch plates prevents proper engagement, leading to clutch slippage, inability to move the car, and accelerated clutch wear. 2. Reduced transmission efficiency: The primary functions of transmission fluid are lubrication and cooling. The fluid transfers heat to the transmission housing and cooler for dissipation. Overfilling increases gear rotational resistance, impairing the transmission's cooling capability and power transfer efficiency, thereby requiring the engine to consume more fuel and reducing overall fuel economy. 3. Increased transmission temperature: Most of this energy loss is converted into heat within the transmission, causing a continuous rise in temperature. This eventually leads to premature bearing wear and friction plate damage, both of which are costly to repair or replace. In conclusion, neither overfilling nor underfilling is advisable. Transmission designs undergo rigorous lubrication and temperature rise testing, with fluid levels precisely calibrated.

7

4

Share

Does Water on Car Floor Mats Count as a Flood-Damaged Vehicle?

During daily car use, sometimes rainwater from shoes can wet the floor mats when entering the car, or spilled drinks may also cause the mats to get wet. If the floor mats get wet due to such reasons, it does not count as a flood-damaged vehicle. However, if the car is stationary and water rises above the floor level, soaking the mats, then it is considered a flood-damaged vehicle. Below are methods to identify a flood-damaged vehicle: 1. Check for rust on the steering column, seat rails, and seat rail screws—these are common signs of a flood-damaged vehicle. 2. Under the floor mat on the left side of the driver's seat, there are numerous wiring harnesses. If there is sediment inside these harnesses, it is highly likely the vehicle has been flood-damaged. 3. Open the trunk and lift the cover to check for water marks in the corners and inspect the rust condition of the onboard tools.

13

2

Share

Can the Car Be Locked If the Engine Is Still Running?

When the vehicle's engine is still running, the doors cannot be locked. Below is relevant information about the engine shutting off: 1. Common reasons for a car to automatically shut off: (1) Vacuum leakage in the intake pipe; (2) Unstable idle speed caused by improper idle adjustment, dirty throttle body, or poor idle control system performance; (3) Unstable fuel pressure, such as excessive wear or poor contact of the electric fuel pump brush, or clogged fuel pump filter; (4) Blocked or leaking EGR valve. 2. Measures to prevent forgetting to turn off the engine when exiting the vehicle: (1) Check the tachometer and display screen. Before exiting, see if the display screen has turned off and gone black. Also, check if the tachometer reads zero. (2) Turn on the daytime running lights. In the light settings, enable the daytime running lights. This method is quite effective. After locking the doors, check if the daytime running lights are off, indicating that the engine is definitely shut off.

4

2

Share

What does in-store license plate registration mean?

In-store license plate registration means that the 4S dealership handles the license plate registration and vehicle inspection for the car owner. The owner doesn't need to manage it themselves, as the registration procedures are quite complicated. Nowadays, 4S dealerships basically provide one-stop services. Additional information: 1. Vehicle license plate: A vehicle license plate is a standardized hard plate with registration codes issued by vehicle management authorities after reviewing, inspecting, and registering vehicles that have applied for plates according to national vehicle management regulations. Vehicle license plates are the abbreviated term for both the plate itself and the vehicle registration certificate. 2. Vehicle registration certificate: The vehicle registration certificate is issued by vehicle management authorities, recording the main contents of the vehicle's initial registration. It is kept by the owner and carried with the vehicle as a standardized registration booklet for recording changes and inspections at any time. According to the 'Road Traffic Management Regulations,' both the vehicle license plate and registration certificate are legal documents permitting a vehicle to drive on public roads.

11

5

Share

What Does Engine Displacement Mean?

Engine displacement refers to the volume of fluid that is inhaled or expelled per stroke or cycle. Below is an introduction to engine displacement: 1. The relationship between engine compatibility and displacement: In automobiles, how well the engine is matched with the vehicle has a significant impact on fuel economy. If a small-displacement engine is poorly matched, it may not be more fuel-efficient than a large-displacement engine and could even consume more fuel. 2. Classification of car levels: In China, car levels are classified based on engine displacement. Mini cars have a displacement of ≤1.0L; compact cars have a displacement ranging from 1.0L to 1.6L; midsize cars have a displacement ranging from 1.6L to 2.5L; executive cars have a displacement ranging from 2.5L to 4.0L; and luxury cars have a displacement of >4.0L.

11

0

Share

What does 10w-40 mean for engine oil?

10w-40 for engine oil refers to: 10 represents the minimum operating temperature of the oil at -25 degrees Celsius; W stands for all-season use (Winter or Summer); 40 represents the high-temperature viscosity of the oil—the higher this number, the thicker the oil is at high temperatures. About engine oil: Engine oil, also known as motor lubricant, serves functions such as lubrication and friction reduction, auxiliary cooling, sealing against leaks, rust and corrosion prevention, and shock absorption for the engine. SAE viscosity grades for winter oils are: 0W, 5W, 10W, 15W, 20W, 25W. The symbol W stands for Winter, and the smaller the number before W, the lower the low-temperature viscosity, the better the low-temperature fluidity, and the lower the applicable minimum temperature. SAE viscosity grades for summer oils are: 20, 30, 40, 50. The larger the number, the higher the viscosity, and the higher the applicable maximum temperature.

14

2

Share

What to Do When New Energy Vehicle Battery Overheats?

What happens if too much manual transmission fluid is added?

Does Water on Car Floor Mats Count as a Flood-Damaged Vehicle?

Can the Car Be Locked If the Engine Is Still Running?

What does in-store license plate registration mean?

What Does Engine Displacement Mean?

What does 10w-40 mean for engine oil?

What Does Replacing the Engine Assembly Mean?

Why is the wiper not moving?

Can You Park on the Highway Emergency Lane?

What documents do you get after financing a car?