···
Log in / Register

What to Do When It Rains During Subject 3 Driving Test?

5 Answers
RowanLynn
07/24/25 10:53am

When encountering rainy weather during Subject 3 driving test, pay attention to not closing the car windows too tightly, turn on the windshield wipers, drive slowly, brake in advance, and maintain a safe distance. Here is more relevant information: 1. Subject 3: Includes road driving skills test and safety and civilized driving knowledge test. It is part of the motor vehicle driver's license examination, and is the abbreviation for the road driving skills and safety and civilized driving knowledge test subjects in the motor vehicle driver's examination. 2. Subject 3 Test Content: The road driving skills test for Subject 3 includes: preparation before driving, simulated nighttime lighting test, starting, driving straight, shifting gears, changing lanes, parking by the roadside, going straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and nighttime driving for large buses, tractors, city buses, medium buses, large trucks, small cars, small automatic transmission cars, low-speed trucks, and special small automatic transmission passenger cars for the disabled. The test content for other permissible driving models is determined by the provincial public security authority traffic management department.

Was this review help?
2
5
Share
VanAaron
08/11/25 2:31am

Driving in the rain requires extra caution, especially during stressful moments like the Category 3 driving test. I would first slow down and drive carefully, as braking distances increase on slippery roads, so it's essential to ease off the accelerator early to prepare for braking. During the test, it's mandatory to turn on the windshield wipers and headlights to improve visibility. Examiners usually pay more attention to safe operations in such weather, so avoid rushing to change lanes or make turns. Maintain a safe following distance to prevent skidding or rear-end collisions. Before the test, check if the wipers are functioning properly and bring a towel to wipe the windshield to prevent fogging from affecting visibility. Taking deep breaths to stay calm is key. In short, the most important thing about driving in the rain is safety first, ensuring a smooth pass in the exam.

Was this review help?
1
1
Share
Expand All
DiErin
09/25/25 4:01am

I encountered rainy weather during my driving test (Subject 3), which really tested my composure. The instructor had advised me to just slow down and drive carefully, not to worry too much about the examiner deducting points. That day, I drove at a slower pace, using the windshield wipers and headlights, and the examiner didn’t say much—after all, everyone is extra cautious on slippery roads. The key is to keep a steady grip on the steering wheel, avoid sudden braking or sharp turns, because safe operation matters far more than speed during the test. Familiarize yourself with the test route beforehand; if heavy rain hits, pause for a few seconds before moving—don’t push your luck. I’d recommend practicing rainy-day driving a few times before the test to build confidence and stay calm.

Was this review help?
5
1
Share
Expand All
JuneFitz
11/08/25 6:09am

Rainy day driving tests basic skills. Adjust the wipers faster to clear rainwater and avoid blocked vision. I use the front defroster to prevent fogging on the windshield. During the test, turn on the position lights and contour lights as required. Brake gently to prevent skidding and loss of control. The examiner for the Subject 3 test might be more lenient, but don't take it lightly. Slowing down is key—maintain a greater safety distance than usual. Practice these maneuvers regularly, and driving in the rain will be no problem.

Was this review help?
10
0
Share
Expand All
SebastianLynn
12/29/25 7:54am

Be well-prepared for the driving test (Subject 3) on rainy days. I will check the weather forecast in advance and bring a cloth to wipe the inside of the windows if it rains. Before the test, ensure the wipers and lights are functioning properly, and the tire pressure is not too low to prevent skidding. If it rains during the test, take a deep breath, stay calm, drive slowly and steadily; the examiner usually won’t be too harsh. Keep the car well-ventilated to avoid fogging up the windows. In short, proper preparation will help you pass smoothly.

Was this review help?
15
5
Share
Expand All
More Forum Discussions

How to Reset the Tire Pressure Monitoring on the Regal?

To reset the tire pressure monitoring system on the Regal: Turn the ignition to ACC, access the driver information center to find the tire pressure display relearn function. Follow the prompts to deflate each tire until the system alerts for each one sequentially. After all four tires have triggered alerts, reinflate them to the specified pressure to complete the reset. The Regal is a model under Buick by Shanghai GM, with body dimensions of 4843mm in length, 1856mm in width, and 1484mm in height, and a wheelbase of 2737mm. Its advantages include a stylish and dynamic exterior design, refined interior with abundant features, and powerful performance in T-series models.
6
4
Share

What causes the abnormal noise when the BMW X3 is running?

BMW X3 running with abnormal noise may be caused by the following reasons: Oil problem: The engine oil does not fully lubricate all parts of the engine. It takes some time for new oil to evenly lubricate all components. If the noise persists after a while, it may indicate severe wear. Additionally, cleaning the internal parts of the engine can enlarge the gaps caused by wear. Poor sealing: Large gaps and poor sealing can lead to deteriorating engine conditions, which may also cause noise. It is recommended to have it checked at a repair shop. Maintenance issue: Lack of maintenance may result in excessive carbon buildup (such as in the engine, throttle, spark plugs, etc.). Cleaning at a repair shop can resolve this issue.
10
3
Share

What does Honda HISS mean?

Here is an introduction about Honda HISS: 1. Introduction: HISS stands for "Honda Ignition Security System", which is an electronic anti-theft system consisting of three main components: a microchip transponder embedded in the key handle, internally programmed with a serial number and authentication key; an ECU engine control computer module; and a sensing coil located at the lock position. After normal shutdown, a flashing red light from HISS indicates that the chip anti-theft function is active. 2. Function: The purpose of HISS is to prevent thieves from starting the vehicle. If a thief were to hotwire or use lock-picking tools to connect the vehicle's main circuit, the anti-theft program in the ECU would immediately read the microchip information in the key via the sensing coil.
6
2
Share

What is the difference between Baojun and Chevrolet car engines?

Baojun and Chevrolet car engines have no difference, they use the same engine. 1.5L naturally aspirated engine: Some models of the Baojun and Chevrolet brands use the same engine, such as the Baojun 730 equipped with a 1.5L naturally aspirated engine and the Chevrolet Cavalier or Sail 3 models with a 1.5L naturally aspirated engine, which share the same engine. Engine performance: The maximum power of this engine is 108kW, and the maximum torque is 250 Nm. The engine's maximum power speed is 5200 rpm, and the maximum torque speed ranges from 2200 to 3400 rpm. This engine is paired with either a 6-speed manual transmission or a CVT transmission.
5
3
Share

Why can't the Envision start due to low battery power?

Envision's inability to start due to low battery power can be attributed to battery aging, generator failure, or electrical leakage. Below are detailed explanations of these issues: Battery Aging: The battery is a consumable automotive component with a typical lifespan of 2-3 years, during which natural power degradation occurs. Owners should replace the battery with a new one. Generator Failure: A malfunctioning generator will fail to properly charge the battery, resulting in prolonged battery depletion. It is recommended to check whether the generator is functioning normally. Electrical Leakage: If the vehicle is equipped with numerous electrical appliances and certain devices have leakage issues, this can lead to battery depletion.
13
0
Share

What Causes the Transfer Case Vibration in Haval H9?

Haval H9 transfer case vibration is caused by the following reasons: Damage to friction plates and steel plates: The vibration in the Haval H9 transfer case is usually due to damaged internal friction plates and steel plates, which show signs of high temperature and wear. These require replacement with new friction plates. During installation, proper clearance adjustment is necessary to ensure the repaired transfer case functions correctly, completely resolving the vibration issue. Function of the transfer case: The transfer case is a transmission mechanism, primarily responsible for power transmission. Failures mainly arise from internal differential or clutch damage. The primary symptom of such failures is often vibration, which is most noticeable during startup or when turning the steering wheel to full lock. However, there's no need to worry as these issues can be repaired.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.