What to Do When Geely Xingrui's Auto Hold Function Fails?

What is the warranty period for Hyundai vehicles?

Hyundai vehicles come with a warranty period of 5 years or 100,000 kilometers. Currently, most automobile manufacturers implement a new car warranty period of 2 years or 60,000 kilometers, whichever comes first. There are two conditions for the warranty period: one is a time limit of 2 years, and the other is a mileage limit of 60,000 kilometers. Once either of these conditions is met, the vehicle's warranty period is considered expired, and any subsequent normal maintenance or repairs will no longer be covered for free. Generally, the 5-year or 100,000-kilometer warranty mainly covers the vehicle's core components, such as the engine, transmission, drivetrain, and chassis. These parts have a relatively low probability of failure but high repair costs. Within the 5-year period, it's rare for these core components to develop issues. Wear-and-tear parts like tires, wheels, headlights, and brakes are usually covered by a warranty of only 3 to 6 months or 5,000 kilometers from the car dealer. Handling an expired warranty: After the car warranty expires, choose a reputable local repair shop for maintenance, following the time and maintenance items suggested in the maintenance manual. Every car manufacturer provides a "Vehicle Regular Maintenance Schedule" upon delivery. Maintenance items and cycles are typically determined by mileage, aiming to achieve optimal performance and extend the vehicle's lifespan through regular maintenance. Car maintenance involves preventive work such as inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts within a specified period. Modern car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. The scope of maintenance covers various aspects of the vehicle's upkeep.

16

5

Share

How to Prove Vehicle Color Change Within Ten Days?

After applying a wrap at a certified modification shop, the shop will provide the owner with a receipt or invoice. Within 10 days from the date of issuance of the invoice, the owner can go to the vehicle management office for registration. According to Article 56 of the "Regulations on the Registration of Motor Vehicles," if the vehicle body color is changed without completing the registration for modification, the traffic management department of the public security authority may issue a warning or impose a fine. The vehicle may also be impounded and required to revert to its original color. To apply for a change in the vehicle body color, the following documents must be submitted in accordance with the "Road Traffic Safety Law": "Application Form for Modification Registration of Motor Vehicles," identity proof of the vehicle owner and agent, the vehicle registration certificate, and the vehicle license. According to Article 6, Chapter 2 of the "Road Traffic Safety Law," if the color change area of a motor vehicle does not exceed 30%, no modification registration is required. Conversely, if it exceeds 30%, the change must be recorded, and registration must be completed within 10 days after the color change. Precautions for vehicle color change: Before changing the color of a motor vehicle, the owner should consult the vehicle management office where the vehicle is registered to confirm whether the region permits color changes via wraps. If the region does not support this method, the modification cannot be registered, and the wrap must be completely removed to restore the original color. Additionally, according to the "Regulations on the Registration of Motor Vehicles," owners no longer need to apply to the vehicle management office in advance. They can first change the vehicle color, install body kits, replace the engine, etc., and then apply for modification registration. According to Article 10, registered motor vehicles must apply for modification registration under the following circumstances: Change of body color. Replacement of the engine. Replacement of the body or frame. Whole vehicle replacement due to quality issues. Change of usage nature, such as converting a commercial vehicle to non-commercial or vice versa. Change of the vehicle owner's residence, moving in or out of the jurisdiction of the vehicle management office. Furthermore, according to Article 15 of the "Road Traffic Safety Law of the People's Republic of China": Police cars, fire trucks, ambulances, and engineering rescue vehicles must be painted with designated patterns and equipped with alarms and indicator lights as required. Other motor vehicles are prohibited from using similar patterns, alarms, or indicator lights.

17

4

Share

What is the wading depth of the Lavida Plus?

The maximum wading depth of the Lavida Plus is 300mm. The wading depth of the Lavida Plus is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Lavida Plus is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, always turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in the water, which could cause severe damage due to water ingestion. Judge the underwater road conditions based on the passage of the vehicle ahead and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at a low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, observe warning water level markers, trees, and other reference points like the wheels and doors of other vehicles to estimate the water depth before deciding whether to proceed. Be aware of your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not proceed and choose an alternative route instead.

20

3

Share

Where is the ETC installed in a car?

The ETC is generally installed on the upper middle part of the front windshield, while for large vehicles such as trucks and buses, it is installed on the lower middle part. The appropriate installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 and 90 degrees. For vehicles with factory-installed or aftermarket explosion-proof film, which may affect the signal transmission of the microwave communication link, the ETC should be installed in the microwave sunroof strip. ETC stands for Electronic Toll Collection, which is an electronic toll collection system. To apply for an ETC, the vehicle owner must provide their valid ID card and the original and photocopy of the vehicle registration certificate. If the application is made by a proxy, the proxy's valid ID card is also required. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection stamp. Additionally, a bank card for deducting highway toll fees is needed, and the vehicle must be registered under the name of an individual aged between 18 and 60. For company vehicles, the required documents include: An introduction letter from the vehicle owner (with official seal); a photocopy of the organization code certificate or business license (with official seal); the original ID card of the proxy; the original vehicle registration certificate; and the vehicle that needs to have the ETC installed. Here are some precautions for installing ETC: Do not block the driver's view. It is best to install it behind the rearview mirror: Many car models have a steeply inclined windshield, which can reduce the driver's field of vision. If the ETC is installed without considering this, it may increase the driver's blind spots. Installing it behind the rearview mirror on the right side can help avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back that can charge itself. Therefore, during installation, avoid the blackened areas on the windshield and positions that may block the solar panel. Once installed, do not remove it arbitrarily: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After the electronic tag is installed on the windshield, the anti-removal lever is pressed in. If the tag is removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. In such cases, you will need to visit an ETC service point to unlock it. This mechanism is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle ahead to avoid automatic toll payment for the preceding vehicle. The ETC lane recognizes vehicles at a speed of 20 kilometers per hour. Driving too fast may result in failure to read the vehicle's device information, leading to toll deduction failure. When using a debit card linked to ETC, insufficient balance may also cause toll deduction failure.

17

1

Share

Why can't the X3 center rearview mirror be adjusted?

BMW X3 mirror adjustment is located on the door armrest. Move the selection control button to adjust the angle of the left and rearview mirrors. The mirror folding button is located on the door armrest. Press the switch to automatically retract the mirrors.

4

3

Share

How to Use Reference Points and Steer the Wheel in Automatic Transmission Subject 2 S-Curve?

When completing the straight section of the curve driving test, it is essential to align the car body straight before entering and drive to the center of the road. If the front of the car is about to cross the roadside line, turn the steering wheel slightly more to the left to keep the left side of the car's front aligned with the roadside line.

6

3

Share

What to Do When Geely Xingrui's Auto Hold Function Fails?

What is the warranty period for Hyundai vehicles?

How to Prove Vehicle Color Change Within Ten Days?

What is the wading depth of the Lavida Plus?

Where is the ETC installed in a car?

Why can't the X3 center rearview mirror be adjusted?

How to Use Reference Points and Steer the Wheel in Automatic Transmission Subject 2 S-Curve?

Does the Corolla have an SUV model?

The Difference Between Compound Torsion Beam and Torsion Beam

What is the Difference Between Color Change and Paint Protection Film?

What are the driving tips for beginners driving manual transmission cars on the road?