What to Do When Ford Displays Engine Oil Change Message?

How much oil must be left before it needs to be changed?

Oil must be changed when less than 10% remains. The method for changing the oil is as follows: 1. Lift the car, remove the protective plate, and place a container under the oil drain screw; 2. Unscrew the oil drain screw, use an air gun to blow for two minutes at the oil filler port, then tighten the oil drain screw after draining and wipe it with a tissue to check for leaks; 3. Reinstall the protective plate and lower the car, then add oil through the filler port. The functions of oil are: 1. To reduce friction and high temperatures; 2. To minimize gas leakage and prevent external contaminants; 3. To prevent contact between water, air, acidic harmful gases, and parts; 4. To cushion the pressure rise in the engine cylinder port; 5. To clean dirt generated on the working surfaces of parts.

13

0

Share

What Causes Engine Oil to Turn Black?

Engine oil turns black due to: 1. Poor fuel quality; 2. Prolonged high-temperature operation of the engine under overload conditions; 3. Failure to replace the oil filter and air filter in a timely manner. Solutions to prevent engine oil from turning black include: 1. Using higher-quality fuel; 2. Avoiding prolonged high-temperature operation of the engine under overload conditions; 3. Replacing the oil filter and air filter promptly. The functions of engine oil are: 1. To separate the surfaces of relatively sliding parts, thereby reducing wear; 2. To carry heat back to the oil tank and dissipate it into the air, assisting the radiator in cooling the engine; 3. To circulate carbon deposits, sludge, and metal wear particles from engine parts back to the oil tank, flushing away contaminants generated on the working surfaces of parts through the flow of the lubricating oil.

12

3

Share

How to drain the washer fluid in a Haval H2?

The method to drain the washer fluid in a Haval H2 is: 1. Start the vehicle and press the washer fluid button on the car to spray the washer fluid continuously until it is completely used up; 2. Open the car's hood, locate the cap of the washer fluid reservoir, open the cap, insert a hose into it, and use a syringe at the other end of the hose to start suction. When the extracted washer fluid overflows, remove the syringe and place the hose on the ground, and the remaining washer fluid will automatically drain out. Taking the 2018 Haval H2 as an example, it is a compact SUV with body dimensions of: length 4365mm, width 1814mm, height 1710mm, wheelbase of 2560mm, and a body weight of 1450kg.

14

1

Share

How many kilometers for the first maintenance of a newly purchased car?

The first maintenance for a newly purchased car is usually around 3,000 to 5,000 kilometers. The first maintenance items include: 1. Changing the engine oil and oil filter, and cleaning the air filter; 2. Checking whether the coolant level is within the normal range; 3. Inspecting the car's brakes and undercarriage components for any scratches; 4. Checking the condition of the generator, air conditioning, water pump, and belts for aging and tightness; 5. Checking the tire pressure and wear condition. New cars have a break-in period, and the usage methods during this period are: 1. Preheating the cold car—properly warming up the car allows the engine oil to lubricate the engine internals better, reducing wear; 2. Timely gear shifting while driving, especially for manual transmission cars—reasonable gear shifting during the break-in period is necessary to avoid high gear at low RPM or low gear at high RPM; 3. Timely maintenance is required for new cars during the break-in period.

17

4

Share

Is the Ford Focus equipped with a dry or wet dual-clutch transmission?

Ford Focus is equipped with a dry dual-clutch transmission. The functions of the dry dual-clutch are: 1. Gradually increase the driving force of the car to ensure a smooth start; 2. Temporarily separate the engine and transmission for gear shifting; 3. Prevent overload of the transmission system; 4. Reduce torsional vibration impact from the engine and extend the service life of transmission gears. Taking the 2020 Ford Focus as an example, it belongs to the compact car category, with body dimensions of: length 4378mm, width 1810mm, height 1468mm, wheelbase of 2705mm, fuel tank capacity of 53 liters, and curb weight of 1242kg.

1

Share

What brand of transmission does the Elantra use?

The Elantra uses a 7-speed dual-clutch transmission from Japan's Aisin Warner. It is equipped with a 1.4T turbocharged engine, which has a maximum power output of 95.6 kW, a maximum torque of 211 Nm, a maximum power speed of 5500 rpm, and a maximum torque range of 1400 to 3700 rpm. It also features direct fuel injection technology and uses an aluminum alloy cylinder head and block. The Elantra's body dimensions are 4610 mm in length, 1800 mm in width, and 1450 mm in height, with a wheelbase of 2700 mm. The car is front-wheel drive, with a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.

15

0

Share

What to Do When Ford Displays Engine Oil Change Message?

How much oil must be left before it needs to be changed?

What Causes Engine Oil to Turn Black?

How to drain the washer fluid in a Haval H2?

How many kilometers for the first maintenance of a newly purchased car?

Is the Ford Focus equipped with a dry or wet dual-clutch transmission?

What brand of transmission does the Elantra use?

Can alcohol be sprayed in the car for disinfection?

Can You Still Drive After Losing 12 Points?

What are the items in Subject Three?

What are the interior color options for the Geely Bin Yue?