What to Do When Encountering Emergencies While Driving

2 Answers
CooperLee
07/24/25 6:15pm
Solutions for emergencies encountered while driving: Brake Failure: During driving, due to improper driving methods or poor vehicle quality, brake failure can easily occur. In the event of brake failure, the first priority is to stop the vehicle by any means necessary. Avoid keeping the car in a high gear. You can first press the accelerator to shift to a lower gear, then reduce the throttle. Throughout this series of operations, pay attention to the direction of the vehicle to avoid injuring pedestrians. Skidding: While driving, especially on rainy days, skidding is particularly prone to occur. If skidding occurs, to prevent rollover, the first step is to reduce speed by gradually decreasing the throttle. Then, steer the wheel in the opposite direction of the skid until the skidding stops before resuming normal driving.
Was this review help?
6
0
Share
VanMason
08/11/25 10:10am
When encountering an emergency while driving, such as losing control of the vehicle or a sudden accident ahead, as an experienced driver with many years of experience, I must remind you to stay calm first. Take a deep breath and don't let tension affect your judgment. The key is to stabilize the steering wheel and make slight adjustments to avoid collisions. When braking, press the pedal gently—never slam on the brakes, as that can easily cause skidding. Then quickly turn on the hazard warning lights to alert vehicles behind you. If the situation allows, gradually slow down and pull over. After stopping, don’t get out to inspect the vehicle immediately; first ensure safety and call emergency services for help. Develop good habits in daily driving, such as regular vehicle maintenance and maintaining a safe following distance—these can be lifesavers in critical moments. Especially in adverse weather conditions like heavy rain or fog, slowing down is even more important. Remember, react quickly but act steadily—protecting yourself and others is the top priority.
Was this review help?
10
5
Share
Expand All
More Forum Discussions

What are the causes of water ingress on one side of the car cabin?

Water ingress into the car cabin can occur due to the following reasons: 1. Sealing issues: Improper alignment of the sunroof cover, such as uneven height or incorrect left-right gaps that do not meet the manufacturer's standards, can lead to poor sealing. Additionally, if the sunroof cover is not fully closed or left open, it can cause water leakage into the cabin ceiling. 2. Corrosion problems: After collision repairs to the car roof, if proper rustproofing is not done, severe corrosion of the roof panel or the edges of the sunroof frame can result in water leakage into the cabin ceiling. 3. Sunroof drainage system issues: The sunroof drainage system mainly consists of drainage channels, drainage pipes, and drain valves. The sunroof is not completely sealed, allowing some water to seep in, which flows into the drainage channels. While minor water seepage is normal, problems such as cracked drainage channels, detached, folded, broken, twisted, or poorly routed drainage pipes, or clogged drain valves can all lead to water leakage into the cabin ceiling.
16
5
Share

What is the warranty period for replaced parts?

For most vehicle models, the warranty period for replaced parts is one year or 20,000 kilometers, whichever comes first. Free replacement applies under the following circumstances: Within 60 days from the date of purchase or within 3,000 kilometers of driving, if major components such as the engine or transmission develop quality issues, you can apply for a free replacement of the corresponding parts. Similarly, within 60 days or 3,000 kilometers, if the vehicle experiences quality problems such as steering system failure, brake system failure, body cracking, or fuel leakage, you can also apply for a free replacement or return. Repairs under the three-guarantee policy: If the vehicle becomes inoperable due to a malfunction while driving, the 4S shop must send personnel to the site for repairs. If the vehicle needs to be towed back to the repair shop, the towing fees will also be covered by the 4S shop.
14
5
Share

Where is the fuel tank cap switch on the BMW X4?

The BMW X4 does not have a dedicated fuel tank cap switch. When the vehicle is turned off but not locked, you can simply press the outer fuel tank cover to open it. There is an emergency backup switch for the fuel tank cap located on the right side of the trunk, which can be used if the fuel tank cap is deformed and cannot be opened. Below is some information about the model: 1. The BMW X4 is a coupe SUV launched by BMW, with styling and design very similar to the BMW X6, although this model is positioned below the X6. 2. The new generation BMW X4 adopts the design style of a concept car, with the fastback silhouette being the most distinctive feature of this model. The front face of the car still uses BMW's classic kidney grille, which integrates with the headlights, giving the front a more aggressive appearance. 3. In terms of dimensions, this model measures 4648*1951*1622mm in length, width, and height, with a wheelbase of 2810mm. Despite the fastback design, the interior space of the car can meet the needs of daily use.
12
3
Share

What is Dynamic Balancing?

Dynamic balancing refers to the balance between the wheels during vehicle operation. The reason for adding balancing weights is that the mass distribution of each tire cannot be perfectly uniform during manufacturing. When the car wheels rotate at high speeds, this can lead to a dynamic imbalance, which manifests as steering wheel vibration or shaking. The steps for performing dynamic balancing are: 1. Remove the LOGO and mount the wheel on the balancing machine, select an appropriately sized fixture, pull out the ruler on the balancing machine to measure, and input the data into the first controller; 2. Take out the curved ruler and measure the rim width, then input this into the second controller; 3. Enter the rim diameter into the controller and press START; 4. Once the test stops, the computer will measure the required weight of balancing weights for the inner and outer sides of the rim. First, install the outer weights, then rotate the tire and tap the weights into place as prompted.
3
2
Share

What does on/off mean on the steering wheel?

ON on the steering wheel means turn on, and off means turn off. The ON button represents turning on: Turn the key to the on position to power the car, and if you continue to turn to the start position, you can start the engine. After turning to the on position, all electrical equipment in the car can be used. There are four positions in the car's ignition switch system, and on is one of them. After turning on the car, the vehicle remains in this position during driving, which is called the car's ready-to-start function. The OFF button represents turning off: OFF is the turn-off button for the vehicle stability control system (Vehicle Electronic Stability System, which is a car anti-skid device that can control both the driving wheels and the driven wheels, including ABS (Anti-lock Braking System) and ASR (Anti-Slip Regulation)). This system is turned on by default, and long-pressing this button can turn it off.
6
0
Share

Why is the charging red light of Wuling Hongguang mini always on?

The reasons why the charging red light of Wuling Hongguang mini is always on are: 1. There is a fault in the vehicle charging system or power supply system; 2. The generator belt or tensioner is too loose, which will cause the power supply system to stop working and the battery light to come on; 3. The battery terminals are severely oxidized or loose, resulting in poor contact and the battery light coming on. The maintenance methods for the vehicle battery are: 1. Charge the battery in time when the ammeter shows insufficient power; 2. Adjust the density of the electrolyte according to the standards for different regions and seasons; 3. Add distilled water or special replenishing fluid when the electrolyte is insufficient; 4. The total time for starting the car each time should not exceed 5 seconds; 5. Start the car regularly when the battery is not used for a long time; 6. Frequently check whether the small holes on the battery cover are ventilated; 7. Check whether the positive and negative terminals of the battery are oxidized; 8. Check whether there is any aging or short circuit in each part of the circuit.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.