What to Do When Encountering an Emergency While Driving?

3 Answers
DeRowan
07/23/25 5:07pm
When encountering an emergency while driving, the solutions are: 1. Brake to reduce speed, bringing the vehicle to a stop or low-speed movement; 2. Hold the steering wheel firmly and avoid making large turns. Precautions for driving on the road include: 1. Pay attention to vehicles behind when turning or changing lanes, judge the distance, and turn on the turn signal in advance before changing lanes or turning; 2. Observe the traffic conditions through the rearview mirror in time when changing lanes, reversing, or overtaking; 3. Observe various traffic signs in advance to avoid penalties for violations; 4. Make a wide left turn and ensure right turns do not affect the straight lane; 5. Avoid excessive or frequent steering wheel adjustments and correct the direction promptly if the vehicle tends to deviate; 6. Maintain a safe driving distance; 7. Be aware of the large blind spots of trucks and stay away or pay close attention to their driving conditions when encountering them on the road.
Was this review help?
19
5
Share
CharlieAnn
08/10/25 12:48pm
As an experienced driver, I believe the key in emergencies is to stay calm and avoid panic. For example, when experiencing brake failure, immediately press the clutch to downshift and reduce speed, gently pull the handbrake to assist in stopping, while firmly holding the steering wheel to avoid erratic turns and prevent rollover. Observe the rearview mirror for the movement of vehicles behind, then slowly move to a safe spot by the roadside. After stopping, turn on the hazard lights and quickly set up a triangular warning sign to alert following vehicles. Develop good habits in daily driving: check tire pressure and the brake system for normal operation, maintain at least a three-second safety distance from the vehicle ahead to provide more buffer space in case of an incident. It's advisable to practice emergency braking at low speeds to understand the vehicle's performance. Safety comes first, so take preventive measures. After an incident, remember to go to a 4S shop for a comprehensive inspection and repair.
Was this review help?
20
5
Share
Expand All
Christian
09/22/25 7:09am
As an urban commuter who frequently encounters traffic jams and hazardous situations, handling emergencies starts with your feet: ease off the accelerator and gently apply the brakes instead of stomping on them, and keep a firm grip on the steering wheel to avoid sudden turns that could lead to loss of control. If there's a high risk of being rear-ended, steer gently to avoid impact but don't swerve out of your lane. Keep emergency tools like a fire extinguisher and first aid kit in the car. After stopping safely in an accident, turn on hazard lights, place a warning triangle, and call for help. Don’t neglect regular car maintenance—check tire wear weekly and change the engine oil as needed. Set up emergency routes in your navigation app as backups. Safety isn’t about luck but planning; develop cautious habits to minimize mistakes.
Was this review help?
3
2
Share
Expand All
More Forum Discussions

Will a scratch affect license plate registration for a brand-new car?

A minor scratch on a brand-new car before license plate registration does not affect the registration process. Documents required for new car registration: ID card, vehicle certificate of conformity, triplicate car purchase invoice issued by the 4S shop, original and duplicate tax payment certificates after paying vehicle purchase tax, insurance policy, compulsory traffic insurance policy. For non-local residents, a temporary residence permit is also required. New car registration needs to be processed at the vehicle management office. After submitting all required documents and paying fees, the vehicle must be driven to the vehicle management office for inspection. Some exempted vehicles only require external inspection, which generally involves checking the engine number and chassis number. After inspection, you can go to the vehicle management office hall to select a license plate. Function of license plates: The main function is to identify the vehicle's region of registration through the plate number, and to trace the vehicle's owner and registration information based on the plate.
19
3
Share

What to Do When the Yellow Fuel Light Comes On

Driving tips after the fuel gauge yellow light comes on: Turn off electrical devices in the car. Although it's a gasoline-powered vehicle, when high-power electrical devices are used, the car's alternator also increases its power output. In a low-fuel state, turning off high-power electrical devices can help conserve fuel. Close the car windows and turn off the air conditioning. The air conditioning is a major fuel consumer, and driving with windows or sunroof open increases aerodynamic drag, leading to higher fuel consumption. Keeping windows closed reduces drag and lowers fuel consumption. Maintain a steady speed within the economical speed range. The economical speed varies depending on the engine displacement. Generally, for 1.2L-1.6L engines, it's around 70km/h; for 1.6L-2.0L, about 100km/h; and for displacements ≥2.0L, approximately 120km/h. Driving within this range ensures the engine operates at its most efficient level, minimizing fuel consumption and allowing you to travel farther even with low fuel. Reduce vehicle weight. Heavier loads lead to higher fuel consumption. In a low-fuel situation, lighten the load by removing cargo or reducing passengers to make it easier to reach the gas station. Daily precautions: When you notice the fuel level is low during daily driving, head to a gas station as soon as possible to avoid prolonged low-fuel driving. The fuel pump in the tank relies on gasoline for cooling. If the fuel level remains too low for an extended period, the pump may overheat and malfunction.
8
1
Share

How long will a motorcycle driver's license be revoked if it is not reviewed annually?

Motorcycle driver's licenses will be automatically revoked after three inspection cycles without annual review. Does a motorcycle driver's license require annual inspection: Motorcycle driver's licenses do not require annual review; they only need to be renewed upon expiration. For motorcycles under 4 years old, inspection is required every 2 years; for those over 4 years old, inspection is required annually. Handling an expired driver's license: If a motor vehicle driver's license is revoked but not more than two years, the driver can regain driving eligibility by passing the road traffic safety laws, regulations, and related knowledge exam. Additionally, if the driver's license is within its validity period or has expired for less than one year, the driver can also regain eligibility by submitting a physical condition certificate.
6
5
Share

What are the consequences of continuing to drive after a vehicle overheats?

Continuing to drive after a vehicle overheats can lead to the following consequences: Decrease in engine's air charge coefficient: Higher temperatures result in lower air density, reducing the actual air intake of the engine. Reduction in engine's air charging capability: Due to engine overheating, the temperature under the hood increases, diminishing the engine's air charging capability. Abnormal engine combustion: This can cause abnormal engine combustion, increasing the likelihood of knocking and reducing engine power. Degradation of engine components: Overheating leads to thermal degradation of engine component materials and can also affect the clearances between various engine parts.
11
4
Share

How to reset the tire pressure monitoring system on the Baojun 730?

Baojun 730 tire pressure monitoring system reset method is: 1. Press the square icon button on the left side of the steering wheel; 2. Switch to the tire pressure monitoring screen; 3. Hold down the triangle icon button to clear and reset. Taking the 2019 Baojun 730 as an example, its body dimensions are: length 4780mm, width 1780mm, height 1740mm, wheelbase 2750mm, and fuel tank capacity 52l. The 2019 Baojun 730 is equipped with a 1.5t turbocharged engine, with a maximum horsepower of 147ps, maximum power of 108kw, maximum torque of 250nm, and is paired with a 6-speed manual transmission.
17
5
Share

Does Zippo use cotton pads or rubber pads?

Zippo uses cotton pads. Zippo uses degreased cotton inside: Tear the cotton apart and remove visible impurities such as small stones and dead leaves. Wash the cotton with water until the outflow is clear. Place the cotton in an enamel pot, add water until it is just submerged, then add NaOH equivalent to 2% to 5% of the water weight. Cover and boil, then simmer for 10 minutes. Cool, rinse with plenty of water, scrubbing for about 10 minutes. Dry the washed cotton on clean paper. The function of Zippo cotton pads: Zippo cotton pads prevent oil leakage, but if too much oil is added beyond the cotton's absorption capacity, it will still seep out! Additionally, the English text on the cotton pad roughly indicates the oil filling area, and the small holes on the pad can also hold spare flints. First, choose genuine Zippo lighter fluid and keep away from fire sources. Before refueling, place waste newspaper or similar padding under the lighter to prevent oil from dripping onto the table. The appropriate amount of oil to add doesn't have an exact standard. Based on experience, add oil until the cotton appears moist, which is about 70% of the cotton's oil absorption capacity. If the lighter, which usually works well, starts having ignition issues, the first thing to consider is whether it needs refueling. However, sometimes to extend the time between refueling, people add more oil, which only leads to waste. When refueling, due to gravity, the oil settles at the top of the lighter (when the lighter is inverted, i.e., the windproof cap area). If the cotton appears moist with oil, it means too much has been added. Cotton has a saturation point for oil absorption. If the body is reassembled into the case, excess oil will leak from the bottom. Therefore, it's recommended to refuel frequently but in small amounts. After refueling, check the case and padding for any oil leakage and wipe it dry before testing the lighter.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.