What to Do When Driver's License Accumulates 12 Points?

2 Answers
MacEmma
07/24/25 2:57am
"If the driver's license accumulates more than 12 points, the license will be temporarily suspended, and theoretical study is required. Passing the study will allow the driver to regain the license. Here is some related knowledge about driver's license point deductions: 1. Rules: New regulations for C1 driver's license point deductions: If the traffic violation points in each scoring cycle (generally a 12-month period from the date of initial license issuance) do not exceed 12 points and there are no outstanding violations (any violations must be resolved), the points will automatically reset to zero in the next scoring cycle. 2. Situations resulting in 12-point deductions: Reversing, driving in the opposite direction, or making U-turns across the central divider on highways; speeding more than 50% above the speed limit (revised): Speeding more than 50% above the speed limit, which was previously a 6-point deduction, is now a 12-point deduction, among other situations.
Was this review help?
8
1
Share
EstherRose
08/10/25 10:30pm
I've been through a similar situation – after years of driving, I unfortunately accumulated 12 penalty points. The procedure was to immediately stop driving and report to the local DMV. They arranged a 7-day traffic safety education course, covering traffic regulations and accident case studies daily. After completing the course, I had to retake the theoretical exam (100 points total, passing score 90). Only after passing could I reclaim my license. Though time-consuming, it was meaningful as it made me reflect on safe driving. My advice: avoid speeding or running red lights to prevent point accumulation. Address penalties promptly – demerit points serve as warnings, but safety should always come first.
Was this review help?
9
1
Share
Expand All
More Forum Discussions

Is it okay to buy a new car that has been in stock for 8 months since leaving the factory?

It is acceptable to purchase, but the decision should be based on your actual car-buying needs and the dealer's situation. Here is some relevant knowledge about stock vehicles: 1. "Stock vehicles" are not necessarily slow-selling cars: The term "stock vehicle" cannot simply be understood as cars that have been slow to sell for a long time. In fact, there are two definitions of "stock vehicles": one refers to the normal inventory of dealers; the other refers to vehicles that have not been sold for more than 3 months after being manufactured and leaving the factory, which are equivalent to slow-selling vehicles. 2. Be cautious with "stock vehicles" that offer significant discounts: At the end of the year, many dealers offer "limited-time special prices" to attract consumers, with these models providing relatively large discounts. If a vehicle has been in stock for too long, it not only ties up capital but can also have certain impacts on the vehicle itself. To sell these vehicles, manufacturers and dealers have to lower prices and sell them off as quickly as possible.
11
5
Share

Why Do Road Surfaces Collapse?

Road surface collapses are primarily caused by the instability of embankment roadbeds due to factors such as rainwater erosion, rising groundwater levels, increased vehicle loads, or other geological hazards. Preventive measures should include thorough investigation of slope soil conditions during the design phase, and calculations should determine whether retaining walls or other protective measures are necessary. When driving on uneven roads, drivers should maintain a relaxed mindset and proper sitting posture. Below are relevant recommendations for driving on uneven roads: 1. Driver's mindset when driving on uneven roads: Drivers should exercise patience, avoid agitation, maintain correct driving posture with upper body firmly against the seatback, hold the steering wheel securely, and minimize upper body swaying or bouncing. 2. Vehicle speed when driving on uneven roads: Reduce speed in advance and maintain an appropriate, consistent speed when traversing uneven road sections.
1
4
Share

Should You Use First Gear or Neutral When Stopping at a Traffic Light?

For manual transmission cars, if the red light wait time is short, you can simply hold the brake in first gear. If the wait is longer, you can engage the handbrake and shift to neutral. Here are the details: 1. Using D Gear: When driving an automatic transmission car and stopping at a red light, if the light is short, keeping the car in D gear while holding the brake is generally fine. However, for longer waits, it's advisable to shift to N gear. This is because when the car is in D gear, the engine remains running, and prolonged braking can lead to transmission overheating. 2. Holding D Gear and Brake: When the car is in D gear and the brake is engaged, the engine operates under load, which not only increases fuel consumption but also risks damaging the torque converter over time. Typically, maintenance checks do not cover components like the torque converter. Incorrect driving habits can shorten the lifespan of these parts, leading to higher maintenance costs and effort in the long run.
14
0
Share

What is the reason for the creaking sound from the lower control arm when braking in an Audi A4L?

New Audi A4L models may produce abnormal noises when braking, which is generally considered to be due to the brake pads being in the break-in period, thus causing noise, or due to excessive clearance between the brake pads and the calipers. When abnormal noises occur in the chassis during braking, it is usually attributed to issues with the left and right curved arms of the lower control arm, or possibly due to a loose chassis. It is recommended to promptly visit a 4S dealership for corresponding inspections when such problems arise. Below are some relevant details: 1. Repair: Replacing the brake calipers and brake pads can resolve the abnormal braking noises. When abnormal braking noises occur, timely inspection and repair are essential, as neglecting them may affect the normal operation of the vehicle. If the braking system fails, it could lead to severe traffic accidents, which should never be overlooked. 2. Definition of braking: The braking system of a motor vehicle, also known as the braking mechanism, refers to the process of stopping or reducing the speed of the vehicle during operation. The braking action is achieved through intense friction between the brake pads and the brake drum. When abnormal noises occur in the braking system, immediate inspection is necessary to prevent brake failure during vehicle operation.
18
5
Share

How many seconds does the BMW X3 take to accelerate from 0 to 100 km/h?

According to official data, the BMW X3 2.0T model accelerates from 0 to 100 km/h in 6.8 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in layman's terms, indicates how much force is available. The greater the torque, the more force is available to propel the vehicle, resulting in faster acceleration. The Range Rover Evoque has a maximum torque of 320 Nm and accelerates from 0 to 100 km/h in 9.6 seconds. The BMW X3 2.0T has a torque of 350 Nm and accelerates from 0 to 100 km/h in 6.8 seconds. Transmission efficiency: The transmission is the medium for transferring power, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The BMW X3 is equipped with an 8-speed automatic transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit is Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The Range Rover Evoque has a power-to-weight ratio of 100 Hp/T and accelerates from 0 to 100 km/h in 9.6 seconds. The BMW X3 has a power-to-weight ratio of 140 Hp/T and accelerates from 0 to 100 km/h in 6.8 seconds.
15
0
Share

What is the difference between large-displacement and small-displacement motorcycles?

Here are the differences between large-displacement and small-displacement motorcycles: 1. Displacement: Large-displacement motorcycles require an engine displacement of 600cc or above; small-displacement motorcycles typically have models with displacements below 400cc. 2. Weight: Large-displacement motorcycles generally weigh over 190KG; small-displacement motorcycles usually weigh around 160KG. 3. Tires: Large-displacement motorcycles have front tires ranging from 120 to 140mm and rear tires from 180 to 200mm; small-displacement motorcycles commonly have front tires of 110mm and rear tires of 140mm. 4. Electronic systems: Large-displacement motorcycles are equipped with advanced electronic assistance systems, such as automatic cruise control, navigation devices, and tire pressure monitoring; small-displacement motorcycles lack excessive electronic systems, offering a purely natural driving experience.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.