What to Do When Car Wipers Suddenly Stop Working?
2 Answers
Here are the solutions for when car wipers suddenly stop working: 1. Check if the transmission linkage has become dislodged; 2. Replace the fuse; 3. Inspect the wiring and the combination switch for the turn signals for any damage; 4. Replace the wiper motor. The function of wipers is to remove raindrops and dust attached to the vehicle's windshield, thereby improving the driver's visibility and enhancing driving safety. Methods for maintaining wipers include: 1. Use windshield washer fluid to clean the front windshield; 2. Regularly clean or replace the wiper blades; 3. Replace components of the linkage mechanism. The steps for replacing wipers are: 1. Lift the wiper upright; 2. Press the clip below to remove the wiper rubber strip; 3. Take off the wiper; 4. Pry up the front end of the middle clip; 5. Insert the wiper into the middle clip, pull it tight by hand until you hear a click, and the replacement is complete.
I noticed the car wipers suddenly stopped working while driving in heavy rain, and my vision was completely blurred—it was really scary. I immediately turned on the hazard lights, slowed down, and pulled over. Then, I tried restarting the car to see if the wipers would start working again. When that didn’t help, I popped the hood and checked the fuse box, locating the wiper-related fuse, which wasn’t blown. Next, I inspected the wiper motor connection point and found it was a bit loose. I tightened it myself with pliers as a test. Finally, the wipers started working again—turns out residual water from the last car wash had caused poor contact. After this incident, I always keep a small toolkit in my car and make sure to clean debris from the windshield more regularly to avoid future issues.
